imperii RR FIERRO Smart Band GPS IPG7 ZION Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
Product Overview
1. Appearance Description
Product List: body 1 Bracelet 1 User Manual 1
( When the Product is off, long pressure Touch Area to reboot.)
2. Download APP
Download1 Hi Move ” front Apple store” of Google play store” (Android APP
store), or scan following QR code.
http://download.keeprapid.com/apps/smartband/himove/index.html
3. Binding
The first time of using, start APP “Hi Move”, register and log in. Enter
[Settings ]> [Bluetooth Device], choose correct MAC address of the device and
complete connect (on Time interface, long press Touch Button to check MAC
address of the device).
4. Turn Over Wrist to Brighten Screen
5. Dismantling
Find the watchband with the lightning logo ( ), open the Bracelet from the
side, and charge from USB charging port. This product is recommended to charge
at the USB ports of desktop and PCG.
Function & Operation
1. Function Interaction
Click On Touch Area to select function.
Long press Touch Area to enter function interface.
2. Switch Interface
Main Interface>Pedometer>Weather>Message.Heart Rate>Multi-Sport Mode>Function.
3 Main Interface
4. Pedometer
5. Weather
6. Message
7. Heart Rate
Press touch area on Heart Rate interface for about 2 seconds, after long-
pressing Touch Button, Heart Rate Real-time Monitoring begins and finishes in
about 10 seconds. Dynamic heart rate is also under monitoring. Go back to
Heart Rate interface after forced long-pressing Touch Button.
8. Multi-sport Mode
Long press the Touch Button of the GPS interface under Function Menu; Select
the status of the GPS switch as “ON”, and long-press the Touch Button for
confirmation, then the GPS switch is turned on successfully. When the status
of the GPS switch as “OFF”, the GPS switch is turned OFF.
Running (Turn on GPS)Used In outdoor open space
Turn on GPS-> Multiple Sports Mode-> Select Running Mode->Bracelet GPSCam
->Sports Countdown ->Sport Start-> End of Sport
During the Bracelet GPSCam, you can long-press the Touch Button to skip the
GPSCam interface. After the GPS sport begins, long-press the touch button
until the end of the 3,2, and 1 countdown.
(Note: Loosen the touch button during the countdown and the sport will
continue)
Running (without turning on GPS)
Turn On GPS -> Multi Sports Mode ->Select Running Mode -> Sport
Countdown ->Sport Start ->Sport End
After starting sport, you can long-press the Touch Button until the end of the
sport after the 3,2 and 1 countdown.
(Note: Loosen the touch button during the countdown and the sport will
continue)
Multi-Sports Mode ->Select Football Mode -> Sport Countdown -> Sport Start
->Sport End
After starting sport, you can long-press the Touch Button until the end of the
sport after the 3,2 and 1 countdown.
(Note: Loosen the touch button during the countdown and the sport will
continue)
Multi Sports Mode ->Select Basketball Mode -> Sport Countdown ->Sport Start
->Sport End
After starting sport, you can long-press the Touch Button until the end of the
sport after the 3,2 and 1 countdown.
(Note: Loosen the touch button during the countdown and the sport will
continue)
The following sports are similar to basketball:
(Note: The sport distance is too short to save the exercise data)
9. Function
On Function interface, long press Touch Button to enter submenu:
Music > Camera > Watch Face > GPS Switch>Find Your Phone> Reset > Power On.
(Note: The build-in music player is supported by Android and IOS system support, and it is only supported by part of third-party players)
FAQ
• How GPS bracelet realize GPSCam and position-time?
1. Please make sure the GPS switch is turned on and select the walking,
running, cycling, and climbing sport with GPS function. The bracelet can only
be positioned if it successfully searches satellites;
2.PIease keep it the open area in the outdoor environment, it will be best in
static state;
3 . The bracelet should toward the sky and the bracelet is fully charged;
4 . Cold start, that is when using it for the first time, the GPS bracelet
shall make GPSCam for about 120 seconds at outdoor open space; Hot start, that
is, it is about 30 minutes from the last GPS positioning time, and the GPS
bracelet shall make GPSCam for about 30 seconds.
( Note : Please use it at outdoor open areas. The GPS signal is greatly
influenced by sunspots, bad weather, atmospheric clouds, electrical
electromagnetics, and high-rise buildings.)
• Why is there an error of the trajectory and altitude values?
The more the sky is blocked, the fewer satellites can be seen, the weaker the
signal strength, the more difficult for GPS work. What’s more, GPS false
signals redacted from the walls of the building will appear, so that the track
will drift with altitude error.
• Short battery life?
1. Whether the bracelet USB is correctly inserted and charged while charging;
2. Insufficient battery power;
3. Whether the GPS function is turned on for a long period of time and is in
GPSCam status.
• Why the bracelet cannot be detected when pairing with phone Bluetooth?
1. Please make sure cell phone Bluetooth is activated, and meanwhile your
phone is withirf system support” range;
2. In pairing, please make sure the distance between the Bracelet and phone
is within 0.5m. After pairing, the communication of Bluetooth is within 10m;
3. For iPhone, check if the phone system’s Bluetooth pairing is canceled and
check if the bracelet is connected between my device through the Bluetooth
configuration.
4. Please charge the Bracelet and long-press Touch Button to turn on.
If the problem is still not solved after charging, please contact customer
service.
• Why Bluetooth cant be connected occasionally?
Bluetooth function of some cell phones will become abnormal occasionally upon
activation. Generally, Bluetooth can be normally connected immediately after
restarting cell phone or Bluetooth.
• How to restore factory settings?
Method 1: If the bracelet has been connected with the Hi Move app, open the
application, choose “Settings” SI “Configure device”, do click on “Restore
factory settings”.
Method 2: Access the Function interface, press a few seconds to
Access the second interface and click on the restore icon.
Note that to re-link the bracelet with the application
In the IOS system, it is first necessary to check the phone settings to verify
if the Bluetooth has been connected with the bracelet: if the Bluetooth is
connected, click to ignore the device and Cancel the link. Then open the
application, look for the device again and connect the bracelet.
• How to update or reset the bracelet?
Connect the bracelet with the phone application. In the application, go to
“Configuration”> Firmware Update “to update it.
To restart it, in the application, access “Settings”> “Configure device”>
“Reset”.
• For iOS system, why data in the Bracelet cant be synchronized to APP, or
there is no incoming call and message reminder from the Bracelet after
resetting or upgrading the bracelet firmware?
1. Access the phone settings and check if you have connected via Bluetooth to
the bracelet. If it is click to ignore the device and cancel pairing. Then
open the application.
Search for the device again, connect the bracelet and choose “Pair”.
2. Make sure SMS and Incoming Call notifications in
The “Hi Move” application are activated.
• Why there is no reminder in the Bracelet after the Android system phone
receives incoming calls or messages?
1. Please make sure APP’ Hi Move” auto-start and notice permission are on in
phone system settings;
2. Add APP “Hi Move” into Android system background white list.
3. Please make sure the Call, MSM, SNS APP in:”Setting”> “Notification” of
cell phone system are on;
4. In case of no message reminder, please reconnect the Bracelet after
resetting, and turn on APP “Hi Move” auto-start and notice permission.
• Shall Bluetooth be connected all the time? Will data in the Bracelet be
saved when Bluetooth is disconnected?
Days of data can be saved in the Bracelet, after storage space is full, the
System will circularly and automatically cover the earliest data.
Please promptly synchronize data to phone APP.
*Note: If incoming call and message reminders are needed after activation, Bluetooth must be kept in connection. Alarm clock reminder supports o fine reminder after setting.
• Why the Bracelet cant be charged?
Please make sure the Host is inserted incorrect direction;
Please use the standard USB charger.
• Is the Bracelet waterproof?
Sealing waterproof design is IP67. You can wear it while washing face, washing
hands.
• What to do when upgrade fails?
Please do not disconnect Bluetooth or log out from APP during upgrading. If
upgrade fails, wait for 2min, after the Bracelet automatically self-recover,
bind with APP and update again. In case of upd at e fails for more than 3
times, please contact customer service. (Note: If the Bracelet is connected to
Bluetooth in iOS cell phone, please cancel Bluetooth matching in cell phone
first, and then reconnect to APP and update.)
Specification parameter
Screen size : 0.96′ TFT
Wristband material: TPU
Battery capacity: 160mAh
Bluetooth version: 4.0 and above
System support: Android 4.3, iOS 8.0, and above
Standby time: 35 days
Charging time: About 2.5h
Sensor: Greenlight dynamic heart r at e sensor
( Due to continuous upgrade of functions, details shall subject to APP “Hi
Move” User Manual.)
( Measuring parameters are for reference only and can’t be used for other
professional purposes.)
TECHNICAL SERVICE :
http://www.imperiielectronics.com/contactenos
Importado por:
B85947513
www.imperiielectronics.com
Pol. Ind. Neisa Sur
Avd. Marconi, Bloque 1, Nave 13
28021 Madrid
Made in PRC
imperii RR FIERRO Smart Band GPS IPG7 ZION Instruction Manual – Download
[optimized]
imperii RR FIERRO Smart Band GPS IPG7 ZION Instruction Manual –
Download
imperii RR FIERRO Smart Band GPS IPG7 ZION Instruction Manual – OCR
[PDF]