ZeFit Mykronoz ZeNeo Smartwatch User Guide

June 7, 2024
ZeFit

ZeFit Mykronoz ZeNeo Smartwatch - logo

ZeFit 3HR
Quick start guide

OVERVIEW

ZeFit Mykronoz ZeNeo Smartwatch - OVERVIEW

WAKE THE DEVICE
Double-tap the touchscreen
ZeFit 3HR screen turns off when not use

EXIT A MENU
Double-tap the touchscreen

MOVE BETWEEN SCREENS

Swipe left or right (horizontal mode) up or down (vertical mode)

To ensure ZeFit3HR is responding accurately to your taps, we recommend using your fingertip and not your nail.

CHARGING

Charge ZeFit for two hours before your first use.
1. Put ZeFit 3HR on the magnetic charging dock
2. Make sure the pin on the charging dock fit correctly onto the charging terminals on the back of ZeFit 3HR
3. Plug the small end of the USB cable provided into the charging’s dock USB port
4. Plug the big end of the USB cable into a power source
5. A battery indicator will fill to indicate charging is in progress. Once ZeFit3HR  is charged, the battery indicator will be full
A full charge takes 1:30 hour. When the battery level gets low, a battery indicator will appear.

PAIRING

The first time you use ZeFit 3HR, a SETUP message will prompt you to set up your ZeFit 3HR using a mobile device.

GET ZeFit3 APP
To set up your ZeFit3HR using your mobile device, you first need to get ZeFit3 App. Search for ZeFit App in the App Store, Google Play, or Windows Phone Store, download and install the App on your mobile device.

ZeFit Mykronoz ZeNeo Smartwatch - PAIRING

System Requirements

iOS
iOS 8+ devices with Bluetooth 4.0 BLE iPhone 4s, 5, 5c, 5s, 6, 6 Plus and newer, iPad (3 rd , 4th, and 5th gen) iPad Mini, iPod touch (5 th gen)

Android
Select Android 4.3 + devices that support Bluetooth 4.0 BLE

Windows Phone 8.1+
Select Windows Phone 8.1+ that support Bluetooth 4.0 BLE
Visit www.mykronoz.com to get the latest compatibility list

1. Enable Bluetooth on your mobile device
2. Open ZeFit App on your mobile device. Sign up if you are a new member or Log in with your existing account. After entering your personal information, tap Set up
3. Make sure ZeFit3 in the list of devices 3HR is nearby and select ZeFit 3HR
4. You will receive a pairing request on your mobile device. Press Pair to accept it
5. Then, a pairing request will appear on your ZeFit display Tap on your ZeFit 3HR to accept the pairing 3HR
6. When ZeFit and on your mobile device’s screen 3HR is successfully paired, you will be notified on ZeFit 3HR

If pairing fails, repeat the same steps. Pairing is a one-time process. If you want to pair ZeFit3HR with another account, you first need to unpair it from the current one. Open ZeFit3 App, go to Settings > Connect ZeFit3 > Unpair ZeFit 3 . Tap Connect ZeFit 3HR to pair a new device

TECH SPECS

Size & Circumference 47.5 x 20 x 10.3 mm

Min:159 mm
Max: 194 mm
Weight| 20 g
Bluetooth| 4.0 BLE
Bluetooth operating range| Up to 5 meters
Battery type| Li-iOn 100 mAh
Battery life| Up to 5 days
Charging time| 1 to 2 hours
Memory| 5 days of activity
Display| TFT color touchscreen 1.06 inches/ 160*64 pixels
Sensor| 3-axis accelerometer , optical HR sensor
Operating temperature| -20°C to +40°C
Water resistance| IP67
International warranty| 1 year

SAFETY INSTRUCTIONS

Before using the device, read these instructions carefully.

  • ZeFit3HR has one built-in battery. Do not disassemble the battery on your own. KRONOZ LLC is not responsible for any damage or personnel injury caused by the removal of the battery or any component.
  • This device is not waterproof so keep it away from all sources of heat or humidity. Do not use it near sink or other wet areas. Do not immerse the product in any liquid other than water. Do not immerse the product in salt water. Do not swim wearing this product. Do not use the product underwater.
  • Charge the battery in a cool, ventilated room. Excessive temperature during charging could cause heat, smoke, fir or deformation of the battery or even explosion.
  • Avoid excessive temperatures. Do not expose this device to excessive smoke, dust sand, or direct sunlight for an extended period of time.
  • Do not open, crush, bend, deform, puncture or shred secondary cells or batteries. In the event of a battery break or leak, prevent battery liquid contact with skin or eyes. If this happens, immediately flush the areas with water (do not rub the eye) or seek medical help.
  • Do not short-circuit. Short-circuiting can occur when a metallic object, such as coins, causes direct connection of positive and negative terminals of the battery. Short-circuiting may damage the battery.
  • Do not use batteries that have been damaged or have been exhausted.
  • Keep the batteries out of children’s reach and in a safe place to prevent danger.
  • Do not dispose of batteries in fire as they may cause explosion. Dispose of used batteries in accordance with your local regulations (such as recycling). Do not dispose as household waste.
  • Use only the USB cable supplied to charge this battery. Do not charge fo more than 24 hours.
  • KRONOZ LLC is not responsible for any damage caused by improper use of the device.

REGULATORY NOTICES

USA
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,  and (2) This device must accept any interference received, including interference that may cause undesired operation.
CAUTIONS
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC NOTICE
This equipment complies with the limits of a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio and TV interference in residential areas. However, even during normal operation, this equipment may cause TV or radio interference. If  this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one or more of the following corrective measures:

  1. Reposition the receiving antenna
  2. Increase the distance between the equipment and receiver
  3. Connect the equipment into an outlet on a circuit different from which the receiver is connected
  4. Consult the dealer or an experienced radio/TV technician for help.

FCC ID: 2AA7D-ZEFT3H

CANADA
INDUSTRY CANADA (IC) STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

EUROPEAN UNION
Declaration of conformity with regard to the EU Directive 1999/5/EC.
Kronoz LLC hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the R&TTE Directive 1999/5/EC.  The complete declaration of conformity is available on request via our customer service: support@mykronoz.com

DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

©2016 Kronoz LLC, all rights reserved. Kronoz LLC, Avenue Louis-Casaï 18, 1209 Geneva, Switzerland
All brands or product names are or may be trademarks of their respective owners.
Pictures and specifications are not contractual.Les marques citées sont des marques déposées par leur fabricant respectif. Photos et caractéristiques non contractuelles. Designed in Switzerland – Made in China

SCAN FOR MORE LANGUAGES

qr code

OR VISIT https://www.mykronoz.com/support
TO DOWNLOAD OUR MULTI-LANGUAGE USER MANUAL

ZeFit Mykronoz ZeNeo Smartwatch - logo

www.mykronoz.com
© 2016 KRONOZ LLC.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals