ionopure Purity Air Filter User Manual
- June 7, 2024
- ionopure
Table of Contents
Instructions
409 Bearden Park Cir.
Knoxville, TN, USA 37919
www.ionogen.us
Notice: the appearance of the actual product may be slightly different than the product shown in this manual.
Product Usage
-
After placing the unit on a flat surface, remove the tank lid and tank, and discard the foam piece in the base.
-
With the cord unplugged, fill the tank with only the amount of ionopure Air solution needed for one day of use. The solution will lose its potency if it sits in the tank for more than two days.
Note: THE POWER CORD MUST BE UNPLUGGED WHEN FILLING THE TANK. -
Carefully place the tank and tank lid back on the base.
-
Plug the power cord into a grounded power outlet. Make sure the unit’s voltage is correct before use.
-
Turn the “control switch/fog adjustment” button clockwise. Power indicator lights will turn on blue or green. The volume of fog can be adjusted by rotating the switch as the unit begins working.
Product Components
Safety Information
Although very rare, in the event eye irritation occurs when using this
product, simply ensure the unit is on low and move the unit farther away from
the affected person. If irritation continues, add 50/50 mixture of cold water
to ionopure Air. Avoid close, prolonged exposure to sensitive electronics or
untreated metals.
DO NOT use on high setting near optical smoke detectors, as they can
mistake the mist for smoke and cause smoke alarms to go off. Setting the unit
on low is sufficient to achieve proper cleaning.
DO NOT run unit in close proximity to clothing, fabrics, upholstery,
carpet, etc. for extended periods, as discoloration may occur in some
materials.
To avoid electric shock, DO NOT unplug product if hands are wet.
DO NOT disassemble, repair or alter product. When product is in use, DO NOT touch mist disc with hands. Make sure power cord is not damaged, knotted, clamped, or pressed against heavy objects (this could cause electrical shock, short circuit or fire).
DO NOT replace power cord without authorization. Unplug product
immediately if there are any operational problems and contact manufacturer.
If power supply wiring is damaged, it must be replaced by a professional.
DO NOT remove tank from base when product is in use.
DO NOT touch solution or base parts when product is in use as this is an
electrical device filled with solution. Avoid spilling solution.
This product is only for use indoors.
Unplug product during thunderstorms or if not in use for long periods of time.
DO NOT turn product over during operation. solution in base could burn the
internal components.
To avoid accidents, DO NOT allow children to use or operate product.
Children should be supervised near the unit at all times. Unplug product when
filling with water and cleaning.
The power supply voltage must be consistent with the rated voltage of the product. DO NOT use product if supply voltage does not match.
Use unit at the normal room temperature. Place unit on flat surface to avoid tilting. DO NOT place unit directly on a wooden floor. Place unit at least 2 meters from furniture or electrical appliances to avoid damage. Keep away from heat sources and avoid direct sunlight. If temperature is below 32°F/0°C, pour out the solution in the tank to avoid damage due to ice. Turn off power supply and unplug power cord when pouring out solution. If changing product location, turn off power supply and unplug power cord. When cleaning, avoid getting water into the internal electronics of product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>