JBL Tune225 User Manual
- June 7, 2024
- JBL
Table of Contents
- JBL Tune225
- User Manual
- WHAT’S IN THE BOX
- HOW TO WEAR
- First time use
- Power on & connect
- Pairing
- Power off
- Manual Controls
- BUTTON COMMAND
- 2. Mono Mode
- Charging
- LED Behaviors
- TECH SPEC
- IC RF Exposure Information and Statement
- Head operation
- BLUETOOTH
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JBL Tune225
User Manual
WHAT’S IN THE BOX
HOW TO WEAR
First time use
Power on & connect
Pairing
Power off
Manual Controls
BUTTON COMMAND
1. Stereo Mode
2. Mono Mode
Charging
LED Behaviors
TECH SPEC
- Driver Size: 12 mm Dynamic driver
- Frequency Response: 20 Hz – 20 kHz
- Sensitivity: 105 dB SPL
- Maximum SPL: 98 dB SPL
- Microphone sensitivity: -30 dBV@1 kHz/Pa
- Impedance: 32 ohm
- Bluetooth transmitted power: <12 dBm
- Bluetooth transmitted modulation: GFSK/ /4DQPSK/ 8DPSK
- Bluetooth frequency: 2.402 GHz – 2.48 GHz
- Bluetooth profile version: A2DP 1.3, AVRCP 1.5, HFP 1.7
- Bluetooth version: 5.0
- Headset battery type: Lithium-ion battery (22 mAh / 3.85 V )
- Charging case battery type: Lithium-ion battery (410 mAh / 3.85 V )
- Power supply: 5 V 1.0 A
- Charging time: <2 hrs from empty
- Music playtime with BT on: up to 5 hrs
- Total music playtime with charging case: up to 25 hrs
- Weight: 57 g
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (6132A- UNE225TWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.049 W / kg.The device was tested for typical bodily operations where the product was kept 5 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-TUNE225TWS
BLUETOOTH
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade
names are those of their respective owners.
NOTE : The maximum operating temperature of the product is 45 ° C
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>