hygger HG-009 Aquarium Internal Power Filter User Manual
- June 3, 2024
- hygger
Table of Contents
HG-009 Aquarium Internal Power Filter
User Manual|
Aquarium Internal Power Filter
E-mail: Mago@hygger-online.com
Please read this user manual carefully before using and follow strictly in
accordance with the manual.
PRODUCT FEATURES:
5 inl Multi-function :
- Provides efficient mechanical filtration; The activated carbon traps particles and removes odors;
- Filter media provide large surface area for growth of beneficial bacteria, which degrades harmful impurities and help maintain the ecological environment in aquariums;
- The filter has a cartridge for pre-filtration. The cartridge is very easy to replace, providing great convenience to the users for maintenance.
- Water outlet can be used for the wave maker.
- Air inlet increases the amount of oxygen in the water.
- Unique and Novel Appearance Design: Special structure for above and below draining, small shape saves your tank space and low water level use. Humanized disassembly and assembly design, easy to use.
- Adjustable Flow Rate: Two options for water draining and wave maker can adjust the flow rate for your fish and turtle.
- Super Silent: High-quality silent and durable pump. Stainless Steel motor impeller can be used for freshwater and salt water.
PRODUCT PARAMETERS
Model No:| Voltage| Frequency| Power(W)| Flow|
Recommended Aquarium size
---|---|---|---|---|---
HG-009-S| 110-120V| 60Hz| 5.| 85GPH| 5-15Gal
HG009-S| 220-240V| 50Hz| 5.| 320LPH| 18-55L
HG009-M| 110-120V| 60Hz| 7.| 135GPH| 10-30Gal
HG009-M| 220-240V| 50Hz| 7.| 510LPH| 37-112L
INSTRUCTIONS
The filter can be used in multiple options.
-
Option 1
1)Connect the wide water outlet to the outlet of the filter.
2)Fix the filter to the wall of the aquariums with the suction cups.
3)Make sure the filter is fully submerged in water.
4)Then connect the filter to the power supply.
5)Adjust the direction of the flow left and right with the flow direction adjuster and adjust the flow rate with the flow adjusting knob.
-
Option 2
With this option, you can add oxygen for fish in aquariums.
1)Remove the plug at the flow adjuster.
2)Connect the air tubing to the air inlet and attach the air tubing to the power cord of the pump with the air tubing clip.
3)Do the same as option 1 to position the filter in the aquarium.
4)Make sure the airflow adjuster is placed outside the water.
5)Connect the filter to the power supply.
6)Adjust the airflow rate by turning the air inlet adjuster.
-
Option 3
With this option, the spray bar sprays water evenly to the surface of the water to help increase oxygen in the water and to agitate the surface water in your aquarium.
- Connect the spray bar with the water outlet as shown in the diagram on the right.
- Do the same as option 1 to position the filter in the aquarium. Make sure
the spray bar is positioned horizontally.
Reminder : Make sure the filter is positioned above the minimum water level.
MAINTENANCE:
The cartridge filter is suggested to be replaced every 2 weeks to 1 month
depending on the number of fish, filthiness, or the extent of degradation.
It is not recommended to clean the filter media, just to replace them when
they get degraded.
-
Replace the filter cartridge, please follow up the following instructions:
Take off the filter cover and pull out the filter cartridge, place the new replacement in and install. (Fig.4-Fig.7)
Reminder : If the water output is significantly reduced, replace the filter cartridge to ensure the aquarium is kept in the best condition.
-
Cleaning/Replacing the filter media
1. as follow to take off the back cover and take out the filter media for cleaning, and re-install. (Fig.13-Fig.9)
2.PUll out the filter cage from the pump body and take out the replacement filter media and re-install. (Fig.10-Fig.12) Attention : The best way to remove the cage is in the way of ‘bending a metal wire’. Do not pull at it horizontally left and right.
-
Maintenance of the pump
Please unplug the power before maintenance, then pull out the filter cage , remove the Impeller cover and take out the Impeller for cleaning. Then re- install. (Fig.10 , Fig.11 Fig.13 Fig.14)
ATTENTION:
- Please operate the appliance under the rated voltage and frequency indicated on the rating label or instruction manual.
- If an abnormal smell or noise is found coming from the filter, unplug it immediately and inspect the cause.
- Properly protect the filter. If a severe collision happens to the filter, check if there is any damage. If there is any breakage, stop using the filter and destroy it.
- Do not let the filter run dry as this will damage the rotor and will cause overheating of the motor.
- Always keep the filtering part not blocked. Otherwise, the flow rate will be reduced and the impeller will stop working.
- Do not use the filter in inflammable or corrosive liquids. The filter should be operated in an environment less than 95 °F.
TROUBLESHOOTING:
| Trouble | Solution |
|---|---|
| Pump doesn’t work | The filter is not starting up |
The main power doesn’t match the power specified on the filter
Water inlet or outlet is blocked
The impeller or rotor is damaged.
Water flow is reduced| The voltage is lower than the rated voltage
Water inlet or outlet is partially blocked
Wastes have accumulated in the filtering system
The filter is noisy| Water inlet is partially blocked
Water level is lower than the inlet of the filter.
Air enters into the filter causing noise.
The rotor is worn (need to be replaced)
PACKAGE INCLUDED:
1x Internal filter
1x user manual
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Warning : To guard against injury, basic safety precautions should be observed, including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
-
You should read all the Important notices on the appliance before using. Failure to do so may result in loss of fish life or damage to this appliance.
-
denger: to avoid possible electric shock, special care should be taken since water is employed in the use of aquarium equipment. For each of the following situations, do not attempt to repair by yourself. Return the appliance to an authorized service facility for service or discard the appliance.
A: Carefully examine the appliance after Installation. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or it is dropped or damaged in any manner. The power cord of this appliance cannot be replaced. If the cord is damaged, the appliance should be discarded. Never cut the cord.
B: To avoid the possibility of the appliance plug or receptacle to one side of a wall mounted receptacle to prevent water from dripping onto the receptacle or plug. A “drip loop” (see illustration) should be arranged by the user for the cord connecting appliance to a receptacle.The drip loop is that part of the cord below the level of the receptacle or the connector if an extension cord is used to prevent water travelling along the cord and coming In contact with the receptacle. If the plug or receptacle does get wet, do not unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the appliance. Then unplug and examine for presence of water in receptacle. -
This appliance Is not Intended for use by persons (including children) with significantly Impaired physical or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should always be supervised to ensure that they do not play with the appliance.
-
To avoid injury, do not touch moving parts or hot parts.
-
CAUTION-Always unplug or disconnect all appliances in the aquarium from electricity supply before placing hands in water, before putting on or taking off parts and while the equipment is being installed, maintained or handled. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect. Always unplug an appliance from an out let when not in use.
-
Do not install or store the appliance where it will be exposed to weather or temperatures below freezing. For indoor household use only. Do not immerse.
-
Make sure the appliance is mounted correctly and securely positioned on the aquarium before operating the appliance.
-
If an extension cord is necessary, a cord with proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled. The connection should be carried out by a qualified electrical installer.
-
The socket-outlet shall be installed near the equipment and shall be easily accessible.
DISPOSAL
Do not dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. This product must not be disposed of together with the domestic waste. This product has to be disposed of in an authorized place for recycling electrical and electronic appliances. By collecting and recycling waste, you help save natural resources, and make sure the product is disposed of in an environmentally friendly way.
WARRANTY
- 1-year free warranty.
- 1-month free return.
- Free replacement for 3 months.
CONTACT INFORMATION:
Website: www.hygger-online.com
E-mail: Mago@hygger-online.com
Thank you for choosing Hygger, making aquarium keeping easier one product at a
time.lf you have any problems or suggestions for internal filter, please
contact us by email before leaving feedback or opening a case, it will be the
fastest way to solve your problem.lf you are satisfied with the internal
filter, please leave positive feedback for our product, in order to let more
customers enjoy it. Thanks again!
E-mail: Mago@hygger-online.com
Website : http://www.hygger-online.com
Puhui Import and Export GmbH
Birnbaumsmuhle 65
Frankfurt(Oder) 15234
Briefkasten:admin@puhui-jk.de
Telefonnummer: +03381-2697990
CET Product Service Ltd.
Beacon House Stokenchurch Business
Park,Ibstone Rd,Stokenchurch High
Wycombe HP14 3FE UK
info.cetservice@gmail.com
+447419325266
MADE IN CHINA
Documents / Resources
|
hygger HG-009 Aquarium Internal Power
Filter
[pdf] User Manual
HG-009 Aquarium Internal Power Filter, HG-009, HG-009 Power Filter, Aquarium
Internal Power Filter, Internal Power Filter, Aquarium Power Filter, Aquarium
Internal Filter, Filter, Aquarium Filter
---|---