AURA PRO Golf Cart Underbody Installation Guide
- June 7, 2024
- AURA PRO
Table of Contents
AURA PRO Golf Cart Underbody
COMPONENTS
INSTALLATION
STEP 1
Inspect kit to ensure all contents were included.
STEP 2
Decide where to locate the light strips and ensure wiring has enough length
for the control box to be installed in the desired location.
STEP 3
Scan the QR code on the back of the control box to download the app.
STEP 4
Secure Control box in the desired location with Velcro or zipties.
* The control box is NOT waterproof. Tuck it away from the elements.
STEP 5
Secure the light strips using the zip ties to tie all the wiring away from the
moving components.
* IMPORTANT: The LED connectors are not waterproof. You will need to use
HEAT SHRINK TUBE or ELECTRICAL TAPE around the LED connectors to ensure the
longevity of the lighting kit.
STEP 6
Open the OPT7 Aura App, pair your smart device to the control box, and pick
your desired color!
AUX WIRING FOR A DOOR/DOME LIGHT
You may choose the desire color choice directly on the Aura app.
This feature will activate when the aux wiring is connected to the trigger
wire for the door light or the positive wire of the dome light.
* NOTE: Trigger wire for door light is recommended if your dome light
lights up progressively when opening the door.
OPT 7 AURA APP
QR Code to download
– Colors
– Modes
– Door Assist
– Support
– Ability to control up to 4 devices at once
http://qr.w69b.com/g/nVasuVFfyhttp://qr.w69b.com/g/qWs74zRRe
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while
installing this product. The Installation Guide is intended as assistance to
reduce setup time. OPT7 Lighting assumes no responsibility for improper
installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.http://qr.w69b.com/g/rh6fcCIM0
NEED SUPPORT?
Scan for tutorial videos, troubleshooting tips, and more.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>