START-RITE Paper Measuring Gauge User Guide

June 7, 2024
START-RITE

START-RITE

PAPER MEASURING GAUGE

STEP-BY-STEP GUIDE

Our paper gauge is perfect for mini explorers who can stand on their own and the instructions below make measuring their wriggly little feet a doddle, so please read through them carefully.
As measuring is only a guide it’s important to check the fit of the shoes once they arrive. Different styles and types of footwear can fit differently to one another so be sure to take a look at our ‘Easy ways to check the fit’ guide or watch our video at here.

1. PRINTING THE GAUGE
When printing double check that your printer is set to 100% or ‘do not scale’ to ensure an accurate result. Once printed use a ruler to check the millimetre markings match up.
PRINTING THE GAUGE2. REMOVE THE WIDTH MEASURE
Cut along the dotted line to the left of the gauge to separate the width tape.

REMOVE THE WIDTH MEASURE

3. PLACE THE CHART ON A HARD FLOOR
You may find it helpful to place the heel line against a wall to make measuring easier.

PLACE THE CHART ON A HARD FLOOR

4. GETTING STARTED
Ask your child to pop one foot onto the paper gauge and make sure the back of their heel lines up with the thick line as shown. Double-check they are standing normally, with their weight on both feet.

USING THE WIDTH TAPE

5. MEASURING THE LENGTH
Jot down the millimetre measurement from their longest toe – no need to add any extra as we’ve already calculated growing room into all our shoes. Repeat for their other foot.

MEASURING THE LENGTH

6. USING THE WIDTH TAPE
Wrap the cut-off width tape around the circumference of their foot at the widest point. The widest point is usually diagonally across from the big toe joint to the little toe joint. If you run your finger along either side of the foot, you’ll feel a bump where the joints are.

GETTING STARTED

7. MEASURING THE WIDTH
Pull the tape so it’s snug around the foot and take a note of the millimetre measurement. Repeat again for their other foot.

MEASURING THE WIDTH

8. GETTING YOUR SIZE
Use the ‘Paper Gauge Conversion Chart’ to calculate your child’s shoes size and order your Start-Rite shoes.

GETTING YOUR SIZE

Make sure your printer is set to 100% or do not ‘scale’.

Measure the widest part of the foot as shown with the tape
1Measure the widest part of the foot as
shown with the tape 2

BACK OF THE HEEL TO THIS LINE

Documents / Resources

| START-RITE Paper Measuring Gauge [pdf] User Guide
Paper Measuring Gauge
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals