JBL Quantum 800 Over-Ear Gaming Headset User Guide
- June 7, 2024
- JBL
Table of Contents
JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum
headsets – from
headset calibration to adjusting 3D audio to suit your hearing, from creating
customized RGB lighting
effects to determining how the boom microphone side-tone works.
jblquantum.com/engine
Software requirements
PLATFORMS: WINDOWS 7 or Higher
500MB of free hard drive space for installation
*QuantumSURROUND / QuantumSPHERE 360 and DTS Headphone:X V2.0
available on Windows only. Software installation required.
WHAT’S IN THE BOX
Requirements
JBL QuantumEngine SOFTWARE REQUIREMENTS
PLATFORMS: WINDOWS 7 or Higher
500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
System compatibility
PC | Xbox™ | PlayStation™ | Nintendo Switch™ | Mobile | MAC | VR
OVERVIEW
01 ANC / TALKTHRU LED
02 ANC / TALKTHRU button
03 Game audio-chat balance dial
04 Volume Control
05 Detachable Windshield foam
06 Notification LED for mic mute / unmute
07 Microphone Mute / unMute
08 CHARGING LED
09 3.5mm Audio Jack
10 USB-C port
11 Voice Focus Boom Microphone
12 Bluetooth pairing button
13 POWER ON / OFF slider
14 POWER / 2.4G / Bluetooth LED
15* RGB-lit JBL logo
16 Flat-fold ear cup
17 2.4G PAIRING BUTTON
18 Volume Control
19 MIC MUTE BUTTON
POWER ON & CONNECT
Bluetooth
SETUP
BUTTON COMMAND
First-time setup
8a Go to Sound Settings
8B UNDER “PLAYBACK” HIGHLIGHT JBL QUANTUM800 GAME AND SELECT “SET DEFAULT
DEVICE”
8C HIGHLIGHT JBL QUANTUM800 CHAT AND SELECT “SET DEFAULT COMMUNICATION DEVICE”
8D UNDER “RECORDING” HIGHLIGHT JBL QUANTUM800 CHAT AND SELECT “SET DEFAULT
DEVICE”
8E IN YOUR CHAT APPLICATION SELECT JBL QUANTUM800 CHAT AS THE DEFAULT AUDIO
DEVICE
MICROPHONE
CHARGING
LED BEHAVIOURS
TECH SPEC
| Driver size: | 50 mm Dynamic drivers |
|---|---|
| Frequency response (Passive): | 20 Hz – 40 kHz |
| Frequency response (Active): | 20 Hz – 20 kHz |
| Microphone frequency response: | 100 Hz -10 kHz |
| Max input power | 30 mW |
| Sensitivity: | 95 dB SPL @1 kHz / 1 mW |
| Maximum SPL: | 93 dB |
| Microphone sensitivity: | -40 dBV @1 kHz / Pa |
| Impedance: | 32 ohm |
| 2.4G Wireless transmitter power: | <0 dBm |
| 2.4G Wireless modulation: | π/4-DQPSK |
| 2.4G Wireless carrier frequency: | 2403.35 MHz – 2479.35 MHz |
| Bluetooth transmitter power: | <9 dBm |
| Bluetooth transmitted modulation: | GFSK, π/4 DQPSK, 8DPSK |
| Bluetooth frequency: | 2.402 GHz – 2.480 GHz |
| Bluetooth profile version: | A2DP 1.3, HFP 1.6 |
| Bluetooth version: | V5.0 |
| Battery type: | Li-ion battery (3.7 V / 1300 mAh) |
| Power supply: | 5 V 2 A |
| Charging time: | 2 hrs |
| Music playtime with RGB lighting off: | 14 hrs |
| Microphone pickup pattern: | Unidirectional |
| Weight: | 410 g |
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade
names are those of their respective owners.