WarmlyYours Snow and Ice Melting Wifi Control Instruction Manual
- June 7, 2024
- WarmlyYours
Table of Contents
Installation Manual
SCW-120-15A
Snow and Ice Melting Wifi Control
Features and Benefits
Can be controlled/programmed remotely with a smart device via the free ‘My
Leviton’ app| Can be used with relay panels for load switching in larger jobs
or other voltages.
---|---
Works with Amazon’s Alexa, Google Assistant, SmartThings, Nest, Ring, and
IFTTT (no automation hub required)| Terminal block for easy wiring
Wall-mount enclosure with hinged cover| May be used for snow melting or roof
and gutter deicing systems
Can also be operated manually| Front door easy-lock clasp operates using a
coin or large screwdriver
Switches up to 15 AMPS with 120 VAC (operational voltage)| Mounts in indoor
non-hazardous locations
Description
The WarmlyYours SCW-120-15A Snow and Ice Melting WiFi Control is a flexible, user-friendly, and, affordable option for snow melting and roof and gutter deicing systems. This unit features a built-in 120V WiFi standard switch and can be used with a compatible relay panel. The relay panel, sold separately, can help switch voltages ranging from 120V to 277V. This unit can switch up to 15 AMPS with 120V, eliminating the need for a relay panel for small jobs.
Wiring Scheme Inside Panel
Specifications
Dimensions ……………………..6.375” (162mm) wide x 6.375” (162mm) high x 4” (102mm)
deep
Weight …………………………5.0 lbs (2.3kg)
*Shipping weight may vary
Ordering Information
Order Number Description …………SCW-120-15A Snow and Ice Melting WiFi Control
Limited Warranty
WarmlyYours 2-year limited warranty covering defects in workmanship and materials applies. Contact your Account Manager for complete warranty information. This document is the property of WarmlyYours. Subject to change without notice.
Wiring Scheme Inside Panel
Specifications
Dimensions ……………………..6.375” (162mm) wide x 6.375” (162mm) high x 4” (102mm)
deep
Weight …………………………5.0 lbs (2.3kg)
*Shipping weight may vary
Ordering Information
Order Number Description …………SCW-120-15A Snow and Ice Melting WiFi Control
Limited Warranty
WarmlyYours 2-year limited warranty covering defects in workmanship and
materials applies. Contact your Account Manager for complete warranty
information. This document is the property of WarmlyYours. Subject to change
without notice.
Snow Melt Diagram: 240V – Typical Line Diagram (for 6 Circuits/Cables) with WiFi Control
Snow Melt Diagram: 120V – Typical Line for (1) 120V Heater Circuit
Restore Power:
Restore power at circuit breaker or fuse. Installation is complete.
Operation
NOTE : The locator light will illuminate when the load is in the OFF
position to facilitate access in the dark.
Rocker Pad (Default settings)
Turn ON from OFF position:
Tap top of rocker – Lights turn ON.
Turn OFF from ON position:
Tap bottom of rocker – Lights turn OFF. If there is a power outage, when
the power is restored, the lights will return to the last setting before the
power interruption.
Cleaning : Clean with a damp cloth. DO NOT use chemical cleaners.
Getting Started
Leviton Wi-Fi® devices use the my.Leviton.com cloud service to provide connectivity from your mobile device when you are home or away. If this is your first Leviton Wi-Fi® device, use the My Leviton app or browse to my.Leviton.com and setup a free account.
Decora Smart™ Wi-Fi® Setup
Leviton Wi-Fi® devices are compatible with the My Leviton App and
my.Leviton.com cloud service. The app is used to pair your device with your
Wi-Fi® network, customize your device configuration and provide communication
via my.Leviton.com. To control the Leviton Wi-Fi® device it will need to be
added to a Wi-Fi® network with Internet access:
• Download the My Leviton App.
• Ensure the Leviton accessory is properly wired and power is applied.
• Upon initial power-up the Locator LED will flash green to show the accessory
is ready to be configured.
• If the Locator LED is no longer flashing green when you are ready to add the
accessory, press and hold the paddle for
7 seconds until the Locator LED turns amber and release.
• Within the app follow the on-screen instructions or press + to add the
device to the Wi-Fi® network and my.Leviton.com account.
• Leviton Wi-Fi® devices support Wi-Fi® 802.11 a/b/g/n networks @ 2.4GHz and
5GHz with WPA or WPA2 security.
Changing Network Configuration
In situations where a wireless access point or password is changed but the
configuration of the switch needs to remain, use the following changing
network procedure:
• Press and hold the paddle for 7 seconds until the Locator LED turns amber
and release.
• The locator LED will flash green.
• Open the My Leviton App.
• Navigate to the device.
• On the device page select Details.
• Within the Details section choose Reconfigure Wireless and follow the app
instructions.
Factory Default
In situations where a switch needs to be returned to factory default follow
these steps:
• Hold the top of the paddle for a total of 14 seconds.
• After the first 7 seconds the LED turns amber – Continue to hold the top of
the paddle until the Locator LED quickly flashes red/amber.
• Release the top of the paddle and the switch will reset.
Attention :
WarmlyYours is not responsible for electricity costs resulting from incorrect
switch programming or from leaving the switch on for too long. It is the end-
user’s responsibility to verify that the snow melting system is only powered
on, as necessary, to clear snow and ice from the surface and then switched off
in a timely manner after the weather event. If the switch is not correctly
programmed or manually turned off in a timely manner, the system can remain on
indefinitely and adversely impact the end-user’s energy bill.
Installation Support • 800-875-5285 • www.WarmlyYours.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>