Behringer I O Box with 32 Remote-Controllable Midas Preamps 16 Outputs Instruction Manual
- June 7, 2024
- Behringer
Table of Contents
Behringer I O Box with 32 Remote-Controllable Midas Preamps 16 Outputs Instruction Manual
Important Safety Instructions
Terminals marked with this symbol carry electrical current of sufficient
magnitude to constitute risk of electric shock. Use only high-quality
professional speaker cables with ¼” TS or twist-locking plugs pre-installed.
All other installation or modification should be performed only by qualified
personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated
dangerous voltage inside the enclosure – voltage that may be sufficient to
constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and
maintenance instructions in the accompanying literature. Please read the
manual.
Caution To reduce the risk of electric
shock, do not remove the top cover (or the rear section). No user serviceable
parts inside. Refer servicing to qualified personnel.
Caution To reduce the risk of fire or electric shock, do not expose this
appliance to rain and moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
Caution These service instructions are for use by qualified service
personnel only. To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation instructions. Repairs
have to be performed by qualified service personnel.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of timE
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
- Do not install in a confined space, such as a book case or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
- Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
- Use this apparatus in tropical and/or moderate climates.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and other
information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and
Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands
Ltd. © Music Tribe Global Brands Ltd. 2020 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at musictribe.com/warranty.
S32 Hook-up
S32 Hook-up
Step 1: Hook-Up
|
S32 with two consoles:
from stage
Mixing Console FOH
(clock master) to stage Mixing Console Stage (sync slave)
S32 with S16 and console:
from stage
Mixing Console FOH
(clock master) to stage
S32 Controls
S32 Output Configuration
S32 Output Signals
Processing|
---|---
A/D-D/A conversion (Cirrus Logic A/D CS5368, D/A CS4385)| 24-bit @ 44.1 / 48
kHz, 114 dB dynamic range
Networked I/O latency (stagebox in > console processing* > stagebox out)| 1.1
ms
Connectors|
Programmable mic preamps, designed by MIDAS, balanced XLR| 32
Line outputs, balanced XLR| 16
AES/EBU outputs (AES3 XLR)| 2
AES50 ports, SuperMAC networking, NEUTRIK etherCON| 2
ULTRANET output, RJ45 (no power supplied)| 1
MIDI inputs / outputs| 1/1
ADAT outputs, Toslink| 2
USB port for system updates, type B| 1
Mic Input Characteristics|
Preamp design| Midas
Input impedance XLR, unbal. / bal.| 5 kΩ / 10 kΩ
Non clip maximum input level, XLR| +23 dBu
THD + noise, 20 dB gain, 0 dBu out| < 0.008% (< 0.006% A-weighted)
Phantom power, switchable per input| 48 V
Equivalent input noise level, XLR (input shorted)| -128 dBu
CMRR, XLR, @ 20 dB gain (typical)| > 70 dB
Input/Output Characteristics|
Frequency range, @ 48 kHz sample rate, 0 dB to -1 dB| 10 Hz – 22 kHz
Dynamic range, analog mic in to analog out (typical)| 104 dB
A/D dynamic range, mic preamp and converter (typical)| 106 dB
D/A dynamic range, converter and output| 106 dB
Cross talk rejection @ 1 kHz, adjacent channels| 100 dB
Output Characteristics|
Output Characteristics Output level, XLR, nom./max| +4 dBu / +21 dBu
Output impedance, XLR, unbal. / bal.| 75 Ω / 75 Ω
Residual noise level, XLR| -83 dBu (-85 dBu, A-weighted)
Digital In/Out|
AES50 SuperMAC networking @ 48 or 44.1 kHz, 24-bit PCM| 2 x 48 channels,
bidirectional
AES50 SuperMAC cable length, CAT5e shielded| up to 100 m
ULTRANET networking @ 48 or 44.1 kHz, 22-bit PCM| 1 x 16 channels,
unidirectional
ULTRANET cable length, CAT5 shielded| up to 75 m
ADAT output @ 48 or 44.1 kHz, 24-bit PCM| 2 x 8 channels, unidirectional
Toslink optical, cable length| 5 m, typical
AES/EBU output @ 48 or 44.1 kHz, 24-bit PCM| 2 x 2 channels, unidirectional
XLR, 110 Ω balanced, cable length| 5 m, typica
Power|
Switch-mode autorange power supply| 100-240 V (50/60 Hz)
Power consumption| 0 V (50/60 Hz) Power consumption 5
Physical**|
Standard operating temperature range| 5°C to 40°C (41°F to 104°F)
Dimensions| 483 x 242 x 138 mm (19 x 9.5 x 5.4″)
Weight32| 5.6 kg (12.4 lbs)
Other important information
Other important information
- Register online. Please register your new Music Tribe equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
- Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at behringer.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product.
- Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
Responsible Party Name:
Music Tribe Commercial NV Inc
Address:901 Grier Drive
Las Vegas, NV 89118 USA
Phone Number:+1 702 800 8290
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>