Photonic Universe ACDC-BT Bluetooth Communication Module Instruction Manual
- June 8, 2024
- Photonic Universe
Table of Contents
Photonic Universe ACDC-BT Bluetooth Communication Module
Application: motorhomes, caravans, RVs, campervans, boats, and other DC and solar systems
Dear Customer, Thank you very much for choosing our product. This manual contains important information about the installation and operations of the Bluetooth communication module. Please read this manual carefully before installing the product.
Note: working with electricity and batteries can be dangerous. Make sure that any work follows all appropriate safety standards and precautions.
Overview
This Bluetooth communication module can be used with the following chargers and controllers:
- Mains battery chargers BC1230PRO, BC1260PRO, BC2415PRO, BC4810PRO
- DC-to-DC battery chargers DCxxxx-xx, DCxxxx-xxS and DCxxxx-xxxx
- Dual battery MPPT solar charge controllers PMPPT series
- Any other products if the user manual of the product explicitly mentions compatibility with the ACDC-BT Bluetooth module
The ACDC-BT Bluetooth communication module will transmit the working parameters of the charger to you phone via the “Charger Connect” phone app. This module is supplied with 3m connection cable to plug into the charger or controller. The module unit can be mounted to a wall using the built-in mounting brackets.
Connection plan
- Plug the cable of the Bluetooth communication module into the Bluetooth interface on the charger.
- Attach the module in any position that you can access easily.
- Note: the module cannot be installed in a metal shield.
- Readings are most accurate within 10 meters of the module.
App instructions
- Step 1: Scan the relevant QR code below on your mobile device
- Step 2: Please ensure that your mobile phone “location” and “Bluetooth” functions are ON.
- Step 3: Run the “Charger Connect” app and then select “ACDC-BT”.
- Step 4 : The working parameters of the device can be viewed here
Dimensions
( Note: all values are in mm)
Specifications
| Model | ACDC- BT |
|---|---|
| Bluetooth version | Version 4.2 |
| Input voltage | 5V (controller supply) |
| Standby current | <10mA |
| Wiring length | 3m |
| Communication distance | <10m |
| Interface Type | XH2.54-4P |
| Dimensions | 67mm x 35mm x 20mm |
| App name | Charger Connect |
Product Specifications
- Model: ACDC-BT
- Bluetooth version: 4.2
- Input voltage: 5V (controller supply)
- Standby current: Not specified
- Wiring length: 3m
- Communication distance: Not specified
- Interface Type: Bluetooth
- Dimensions: Not specified
- App name: Charger Connect
Frequently Asked Questions (FAQ)
Q: What is the purpose of the ACDC-BT Bluetooth communication module?
A: The ACDC-BT module allows you to monitor the working parameters of your
charger or controller remotely via a mobile app.
Q: What is the communication range of the Bluetooth module?
A: The communication distance is not specified in the product
specifications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>