olide Wireless Push Button Access Automatic Doors User Guide

olide Wireless Push Button Access Automatic Doors User Guide

Wireless push button & access for automatic doors ON-PB188

• Features
• Adjustable releasing timer by VR. 0.5~6 Sec. (Default: 0.5 Sec.)
• Dapper appearance with anti-off screw.
• With large capacity output, available to be used with autodoor, electric lock and access controller.
• Easy to install with no wiring.
• Learning code type, one access can match 40 pieces push buttons.
• Optional transmitter. (ON-201DF / ON-P601)

Specification

Wireless access for automatic doors(ON-PB188R)

  Power input|   AC 100V~240V
  Standby current|   25mA±5%
  Operating current|   45mA±5%
  Relay contact capacity|   AC125V 0.5A / DC30V 1A
  Wireless push button(ON-PB188T)
  Power supply|   DC 3.3V, 2 pcs battery (CR2032)
  Emission current|   2.6mA / times
  Life of battery|   200 times / day, 300 days
  Transmit distance|   Max.12m(Depending on the environment)

Appearance

Optional transmitter

• The procedure of adding / deleting push button (transmitter)

Step: Pressing the learning mode button(MSW1) on the PCB(ON-PB188R), the Red LED(MLED1) will light, then press the push button and Red LED(MLED1) will flash(Continue press other push button). After add all push button, cut off the power supply from ON-PB188R for 3 seconds, then turn on power. Press push button then Green LED(LED1) will light, setting success.
Step: Pressing the learning mode button(MSW1) until the Red LED(MLED1)off, all push buttons have been deleted from memory.

Wire configuration

Dimension: Unit(mm / inch)

Specifications subject to change without notice for further modification.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>