Suteck Yogurt Maker Instruction Manual

: June 7, 2024
: Suteck

Table of Contents

Introduction
Part Name And Exploded View
Features
Notice Before Use
How To Use
- Yogurt
How to set the operation panel
Cautions
Maintenance And Repairs
Analysis On Frequently-asked Questions
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Suteck Yogurt Maker Instruction

Introduction

Thank you for choosing and using the SNJ-159B type of yogurt maker.
This product features novel appearance, smooth line and beautiful shape; adopt the technology PTC (Positive Temperature Coefficient),accurately control the temperature for making the yogurt more delicious in taste.
State indicates clearly, function is simple, safe and energy efficient and convenient; Use without any pollution and conform the state sanitary standards. This product is only limited to the family or similar place use.

Part Name And Exploded View

diagram

Features

Elegant design and fineness of appearance;
Unique structure for equal heat transmission, maintaining the activation of lactobacillus;
Transparent top cover and container lid, making the state observable;
PTC adopted for constant temperature and safe operation, and low power of 30W for cost saving;
Container design of freshness box-like, preventing the yogurt from pollution before drinking;
8 glass jars for ferment yogurt, easy for take away and storage.
Microcomputer control technology adopted for accurate temperature control;
Timing and full-automation function embodied;
Sound prompt when finished.

Notice Before Use

Unwrap its packages.
Check whether the voltage indicated on the rating label is consistent with your voltage used.

How To Use

Operation steps

Yogurt

_ Disinfect Method: _Wash the jars and jar cover with warm water – DO NOT BOIL more than 1 minute for disinfection.
Caution: Only wash the jars and jar cover with warm water – DO NOT BOIL. Don’t wash the top cover and the product body with boiled water.
Mix Method: Put the materials into the jars in the proportion of:
Option 1: 1L Refrigerated fresh milk + 1 parcel Ferment or 5% refrigerated pure yogurt.
Option 2: 1L Asepsis sealed pure milk + 1 parcel Ferment or 5% refrigerate pure yogurt.
Option 3: 1L Milk made by milk powder + 1 parcel Ferment or 5% refrigerated pure yogurt.
Note: The amount of ferment or refrigerated pure yogurt will change with equal proportion depending on the amount milk
Cautions:
(1)- Please make sure the materials are not overdue or degenerative.
(2)- For more information on the amount of the ferment please refer to “Mix method” section.
(3)- When the milk is made of milk powder, please refer to the proportion instructed, 400ml of milk powder+ 1100ml of water.
Ferment
Method: Cover the jars with the jar cover when the raw materials are mixed, and put it into the ferment pot, and cover with the top cap. Plug in and push the power switch for ferment to begin. The ferment time has to be controlled manually. The ferment time is about 6-8 hours.
The finished yogurt would coagulate and look like “bean curd”. The longer the ferment time is, the bigger the acidity is.
Caution: The Ferment time will be affected by the surrounding temperature and the temperature of the raw materials. So it needs more time when in low surrounding temperature or using refrigerated milk but shall not be more than 14 hours.

Note: In order to shorten the ferment time and improve the equality of heat transmission, you can put some warm water into the ferment pot so that the yogurt would be more even and more smooth.

Keeping freshness
Method: Just fermented yogurt is edible but not very delicious, Those who do not like refrigerated food can enjoy it at this time after flavoring. If you do not enjoy it this time, you can put the container with fermented yogurt into refrigerator directly. It is extremely good after being refrigerated.
Caution: The refrigeration time for the yogurt shall not be more than 7 days. It is recommended that you enjoy it within 3 days since the activation of lactobacillus in yogurt is the highest in this period of time.
Flavor
After fermentation and refrigeration you can follow this method: You can enjoy the yogurt after adding some flavoring with fruit juice, fructose, honey, etc. as you like.

Notes:

If a large amount of gas and stench is produced after fermenting, it indicates the water or the milk power is polluted and the yogurt cannot be eaten. If it appears in the form of pudding with yellow gloss and tastes sour, it shows the fermentation is good.
Longer fermented time would produce a large amount of derived liquid (yellowish liquid) and make it quite sour, it is normal and no need to worry. Your can enjoy the derived liquid separately (since the derive liquid contains an abundance of nutriment, such as lactic acid, vitamin B, etc.) or mix it with the yogurt to eat.
As for children, whole milk powder or fresh milk is recommended. But for obese people, low-grease or skim milk power or fresh milk is recommended. (Adding fructose to the milk can speedup the fermenting process, and the flavored milk is not recommended).
If diarrhea or stomach discomfort appears after eating the yogurt you should lower the amount f yogurt to 100ml each time and then gradually increase to 200-300ml.

How to set the operation panel

Plug the cable in the wall socket, the number “888” will appear as follow, with “di” sounds which indicates the power is on, and the machine is ready.
Press ” Function ” key to choose the function ,the Temperature lamp will light, press “+” or “-” key, to set working temperature to make yogurt or rice wine (Set range 68°F r–../ 122°F). Yogurt maker temperature around 107°F+37°F
Then press “start/cancel” button after the temperature is set. Press “+” or”-” key, could set work time. (Set range 8hr–../48h). After the time set, press “start/cancel” button,’ ‘time” lamp lights, the machine on working. If you want to cancel the work, press the “start/cancel” button longer.

Cautions

Please make sure the rated voltage is the same as the voltage that you use.
Please don’t use this machine near flammable articles.
It is forbidden to remove or insert the plug with wet hands, otherwise may result in getting an electric shock.
This product is forbidden being washed or soaked in water, otherwise its performa1nce will be affected.
Make sure not to repack, disassemble or repair the product by layman of electric apparatus.
Don’t use the product in unstable or moist place, or close to other heat source, otherwise it will be damaged or broken down.
If the cable is damaged, you must change it at The manufacturer or the agent, so as to avoid causing danger.
Make sure the yogurt maker is placed on where the child cannot reach. It may quit working while touching keys carelessly.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Maintenance And Repairs

You must remove the plug after use and must not wash the machine before it cools down.
You should wash it in time after use, or the peculiar smell would appear.
Don’t brush it with banana oil, petrol, abstergent, hard brush, and stainless steel ball, etc ..
Make sure not to soak or shower the outer cover. You can wipe it with soft wet cloth (not too wet}.
When the products are not used for a long time, please clean and pack it into box, and put in ventilate and dry place so as not to be affected with damp.

Analysis On Frequently-asked Questions

Indicator lamp or the number is not bright.
a. Is the power cut?
b. Has the cable plugged in the socket? c.ls the socket in the state of OFF?
The milk is fermented to yogurt after finish:
a. Is the time set too short?
b. Is indoor temperature or milk temperature too low? (if temperature is too low, Prolong the working time appropriately)
The peculiar smell of the yogurt is too heavy after finish:
a. Is the time set too long?
b. Is the raw material overdue or degenerative.
Notes: If the trouble still can not be solved after analysis as above, please contact our company or our distributor. Forbid layman to disassemble the product.