ZTE Optus X Tap 2 Prepaid Smartphone User Guide

ZTE Optus X Tap 2 Prepaid Smartphone User Guide

Next-Gen Audio Experience: Best Noi...

Next-Gen Audio Experience: Best Noise-Canceling Headphones of 2023

Optus X Sight 2

Getting started

The OPTUS X Sight 2 is specially designed for the OPTUS Network to give you the best experience possible. It’s easy to set up and use, but if you need extra help, this guide will take you through the process. Plus it’s packed with tips to help you get the most out of your new phone.

Choose your Prepaid plan
While you’re activating your SIM, we’ll ask you to pick your Prepaid plan. We have plans to suit different types of usage and if the one you choose doesn’t work for you, you can change it. See the full range at optus.com.au/prepaidplans All information contained in this booklet is correct as at October 2021. For the most up-to- date information visit optus.com.au/prepaidplans

The details

To request the barring of all premium SMS and MMS services go to optus.com.au/premiumsms
Emergency calls to 000 are free; you don’t need credit.
Your ID may need to be verified by the government DVS (Document Verification Service) so it will need to be current and valid.
To learn more about your privacy at OPTUS, visit optus.com.au/privacypolicy For more details about your Prepaid plan, visit optus.com.au/CIS and optus.com.au/standardagreements

Setting Up Your Phone

The nano-SIM card can be installed or removed while the phone is turned on.
Power off your phone before removing or replacing the battery.
WARNING!
To avoid damage to the phone, do not use any other kind of SIM card, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano- SIM card from your service provider.

1. Place your finger in the slot at the bottom of the back cover, and gently lift and remove the cover.

2. Install the nano-SIM card and the optional microSDXC card as shown.

3. Insert the battery, making sure the connectors align. Gently push down on the battery until it clicks into place.

4. Replace the back cover.

Charging the Phone

Your phone’s battery should have enough power for the phone to turn on, find a signal, and make a few calls.
You should fully charge the battery as soon as possible.

WARNING!
Use only OPTUS chargers and USB cables. The use of unapproved accessories could damage your phone or cause the battery to explode.

1. Connect the adapter to the charging jack. Ensure that the adapter is inserted in the correct direction.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully charged.

NOTE:
If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 minutes.
Contact customer service if you still cannot power on the phone after prolonged charging.

Powering On/Off Your Phone

Make sure the battery is charged before powering on.

• Press and hold the Power key to turn on your phone.
• To power off, press and hold the Power key to open the options menu, and touch .

NOTE:
If the screen freezes or takes too long to respond, try pressing and holding the Power key for over 10 seconds to restart the phone.

Waking Up Your Phone

Your phone automatically goes into sleep mode when it is not in use for some time. The display is turned off to save power and the keys are locked to prevent accidental operations.
You can wake up your phone by turning on the display and unlocking the keys.

1. Press the Power key to turn the screen on.
2. Swipe up on the screen.

NOTE:
If you have set a face verification, a fingerprint, an unlock pattern, a PIN or a password for your phone, you’ll need to use your face or fingerprint, draw the pattern, or enter the PIN/password to unlock your screen.

PRODUCT SAFETY INFORMATION

LEGAL INFORMATION

Copyright © 2021 OPTUS Pty Ltd.
All rights reserved.
No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of OPTUS.

Notice

OPTUS reserves the right to make modifications on print errors or update specifications in this guide without prior notice.
We offer self-service for our smart terminal device users. Please visit the OPTUS website (at optus.com.au) for more information on self-service and supported product models. Information on the website takes precedence.
This is the Quick Start Guide only.
You can download the user guide from optus.com.au

Disclaimer

OPTUS expressly disclaims any liability for faults and damage caused by unauthorized modifications of the software.
Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software.

Trademarks

Android™ is a trademark of Google.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by OPTUS is under license.
microSDXC logo is a trademark of SD-3C, LLC.
Other trademarks and trade names are those of their respective owners.

YESRET5113 AWO300045 (8/21)

Read More About This Manual & Download PDF:

References

• Optus Plans Critical Information Summary
• Support answers - Optus
• Prepaid Mobile SIM Plans | Mobile Phone SIMs - Optus Prepaid
• Our Privacy Policy (with Credit Reporting Policy)
• Legal & Regulatory

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>