NEXTECH Clip-on BodyCamera User Manual
- June 7, 2024
- Nextech
Table of Contents
NEXTECH Clip-on Body Camera User Manual
About Product
- High quality image
- Imported HD lens
- Compact design, portable handhold DV
- Video format: 1280×720 & 1920×1080
- Motion detection supported
- High-speed data transmission USB 2.0 interface
- 128GB micro SD card supported
- Video recording for about 3 hours
- Loop video recording and recording while charging supported
Structure Description
Operation Guide
Charging:
Please follow steps below to charge :
- Charging by connecting to USB port of PC or power bank.
- Recording function is available while charging with charger or power bank.
- Red LED will be on while charging, and off after fully charged. The blue light is on. Normally, it takes 1.2 hours to be fully charged.
Notes:
- When power is low, it will automatically stop recording and then power off.
- Blue LED will flash quickly if without a Micro SD card inserted.
- Blue and yellow LED will both flash when the micro SD card is full.
- After being idle (non-recording state) for 3 min, it will automatically power off.
Power on/off:
Press and hold the power key for a second or so to power on/off.
Video recording :
In standby state, short press “Power/ Video” key, and then the blue LED slowly
flashes, which indicates the video recording state. Short press “Power/ Video”
key to stop video recording, and the blue LED will be on. The video data is
saved as one AVI file every 5 minutes.
Audio recording:
In standby state, short press the “Audio” key, and then the yellow LED slowly
flashes, which indicates the audio recording state. Short press the “Audio”
key to stop audio recording, and the blue LED will be on. The audio data is
saved as one WAV file every 1 hour.
Turn on / off status indicator:
Press and hold the “Audio” key for 1 sec to turn on / off status indicator.
E nabled/disable motion detection:
Press and hold the “photographing” key for 1 sec to enable/disable motion
detection. When motion is detected by the camera, it will automatically record
video for 1 min.
Usage of reset hole:
Use a thin needle to stab the reset hole to reset the device when it stops
working.
Settings:
Users can set 720P (default) or 1080P video resolution, loop video
recording(enabled by default), time watermark (enabled by default). Connect
the device to PC with micro SD card inserted, and create a new TXT document
named ‘settings’ in the root directory of the card. Input contents as ‘1,0,1’
, each number is optionally 0 or 1 (The first number: 0 means 720P, 1 means
1080P. The other two are corresponding to loop video recording and time
watermark; 0 means disable, 1 means enable), Save and unplug. Reboot the
device, and the document will disappear after success.
Connecting to computer:
Yellow LED indicator slowly flashes when connected to computer. Now you can
access the data in card or use it as a USB camera.
Modifying the time:
Time setting can be completed by modifying the time in the TXT file named
“settime” in the root directory of card . Save and unplug, then restart the
device. Time in the file will recover to original value.
Parameters
Items
|
Parameters
---|---
Video Format| AVI
Video Encoding| M-JPEG
Video Resolution| 1920 x 1080 FHD
Image Proportion| 16.9
Video frame rate| 30 fps
Media Player| Popular Video Player
Systems supported| Windows me/2000/xp/2003/vista;Mac os;Linux
Battery capacity| 560mAh
Video recording duration| About 3 Hours
Charging| DC-5V 500mAh
Interface type| Micro 5 pin USB
Storage support| SDHC or SDXC (128 GB supported) micro SD card
Battery type| High power capacity polymer lithium battery
Attentions
Please read this manual carefully before using the product and keep it for
future usage.
Warning: ln order to maintain the performance of the product, do not
place or use the product in hot, cold, dusty or humid environment. Do not
place the product in the following environment: High humidity environment,
such as bathroom. Direct exposure to sunlight or similar high temperature
environments. (e.g. In a car exposure to the sun ). Do not be close to the
strong magnetic fields, such as television, speaker, etc. Do not place it in a
strong vibration or instability location, such as on unfixed shelf.
Security:
Do not attempt to disassemble this product. Do not put foreign matter into
this product. Prevent the product from falling or falling into the water. If
you do not use it for a long time, please charge once every month.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>