JBL Partybox 100 User Guide

June 7, 2024
JBL

JBL logo

PARTYBOX 100

JBL Partybox 100 - 1

Quick Start Guide

1 What’s in the box

1 What’s in the box - Partybox

1 What’s in the box - Charger

Note:
-­ For more information, please download the owner’s manual from www.jbl.com

2 Overview

2.1 Top panel

2.1 Top panel

  1. Battery level indicator
    Battery level indicator.
  1. Press to power on or off.

  2. Press to enter Bluetooth pairing mode.
    Press and hold for 20 seconds to forget all paired devices.

  3. Press to toggle between different light patterns.
    Press and hold for 2 seconds to turn the strobe light on or off.

  4. Press repeatedly to switch between bass boost level 1 and level 2 or turn off.

  5. +/-
    Press to increase or decrease the volume level.
    Press both simultaneously to mute the audio output.

  6. Press to play or pause the music.

2.2 Back Panel

2.2 Back Panel

  1. USB
    Charge an external USB device.
    Connect to a USB storage device

  2. AUX
    Connect to an external audio device through an audio cable.

  3. VOLUME (MIC)
    Rotate the knob to adjust the microphone volume.

  4. MIC
    Connect to a microphone (not provided).

  5. VOLUME (GUITAR)
    Rotate the knob to adjust the guitar volume.

  6. GUITAR
    Connect to a guitar (not provided).

  7. GAIN
    Guitar and microphone gain control buttons to match different sensitivity of the mic and guitar.

1

3 Carrying

3 Carrying

4 Power on

Place your product vertically on a stable, flat surface near a live AC (mains) outlet.

4 Power on

5 Charging USB Devices

5 Charging USB Devices

6 Connections

6.1 Bluetooth

6.1 Bluetooth

6.2 USB

6.2 USB

2

6.3 AUX

6.3 AUX

7 Mixing Sound with Microphone/Guitar (not provided)

7 Mixing Sound with Microphone Guitar
To adjust the mic echo level when the mic is plugged:

  • Press / + to toggle the echo level (echo level 1 set as default).
  • Press / + to switch from level 1 to level 2.
  • Press / + to turn off the echo level.
8 TWS (True Wireless Stereo) Mode

Press and hold on both speakers for 5 seconds, TWS connection will be built up.

8 TWS \(True Wireless Stereo\) Mode

9 LED Behavior

White (Constant)     Power on
Amber (Constant)   Standby
Off                          Power off

White (Regular flash) Pairing
White (Constant)       Connected
Off                             Not connected

White (Constant)      On
Off                           Off

Red (Slow flash)        Low battery
White (Slow flash)     Charging
White (Constant)       Charged

3

10 Specifications
  • Product name: PartyBox 100

  • AC power input: 100 – 240 V ~ 50/60 Hz

  • Built-in battery: Li-ion 2500 mAh, 14.4 V

  • Power consumption: 60 W

  • Standby power consumption:
    < 2 W with BT connecting;
    < 0.5 W without BT connecting

  • USB output: 5V 2.1A

  • Speaker drivers: 2 woofers + 2 tweeters

  • Speaker impedance: 4 Ω

  • Total output power: 160 W

  • Signal-to-noise (S/N) ratio: 80 dBA

  • Frequency response: 45 Hz – 18 KHz (-6 dB)

  • Battery fast charge time: 3.5 hours

  • Battery standard charge time: 6.5 hours

  • Battery playtime: 12 hours

  • Bluetooth version: 4.2

  • Bluetooth profile: A2DP V1.3, AVRCP V1.6

  • Bluetooth transmitter frequency range: 2402 – 2480 MHz

  • Bluetooth maximum transmitter power: 15 dBm (EIRP)

  • Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK

  • Bluetooth range: Approx. 10 m (33 ft)

  • USB format: FAT16, FAT32

  • USB file format: .mp3, .wma, .wav

  • Input sensitivity (AUX in): 370 mV rms (3.5 mm connector)

  • Digital input: Bluetooth/USB -9 dBFS

  • Dimension (W x H x D): 288 x 551 x 290 mm / 11.3 x 21.7 x 11.4 in

  • Net weight: 9.7 kg / 21.4 lbs

4

Note: The product is in compliance with the European Union energy legislation.

  1. Bluetooth connection mode
    The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation.
    The product will enter into sleep mode (networked standby), after 20 minutes without operation, the power consumption @ sleep is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection.

  2. Bluetooth disconnection mode
    The product will enter into standby mode, after 20 minutes without operation, the power consumption @ standby is less than 0.5 Watts.

92

Bluetooth-icon.png

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

93

CH_JBL_PartyBox 100_QSG_CR_V15

94

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals