RYER Baby Bottle Warmer Instruction Manual

RYER Baby Bottle Warmer

INSTRUCTION

Note: Pay attention to prevent burning during use. Please don’t touch the bottle warmer until it’s completely cooled down.

EXPLANATION OF SETTINGS

• ON/OFF:
  Press this button to turn on the appliance, the light will turn on. Press the button again to turn the appliance off and the light will go off too.

• Choose Function:
  Press this button to choose a function. This appliance has 4 functions:

• Fast warming setting: (Add 40ml distilled water):
  Quickly warm a bottle of milk in around 3 minutes and sterilize bottles with timer. The screen shows a timer countdown. Take the bottle out immediately after warming to the right temperature to avoid overheating.

• Constant milk warming: (Add distilled water to MAX line mark):
  Milk is warmed at a slower speed (about an hour) at set temperature and then will be kept warm for 24 hours. Defrost a bottle of milk to liquid state. Screen shows real time WATER (not milk) temperature in degree centigrade.

• Food heating: (Add distilled water to MAX line mark):
  Heating food at desired set temperature in around an hour (frozen meat puree takes 3 hours) and kept it at set temperature for 6 hours. Screen shows real time WATER (not food) temperature in degree centigrade.

• Sterilize: (Add 100-150ml distilled water)
  Select this setting when you want to sterilize your bottle or pacifiers.

WARNING

• Please check all parts of this bottle warmer to ensure safety and cleanliness before using.
• Put the bottle warmer on a horizontal surface.
• Make sure that the bottle warmer has been filled with an appropriate amount of distilled water to avoid dry burning before you plug it in. (The bottle should not be floating after adding water).
• After you plug in the power, the bottle warmer will “beep” prompts that the power is connected.
• Press the power button, the power light turns on.
• Before connecting the power supply, make sure that the supply voltage is the same as the required voltage for the bottle warmer.
• A transformer is needed for different voltages.

MANUAL FOR FAST/MILK/FOOD

This bottle warmer has a smart memory function. The last used warming time is ‘remembered’ for your next use.

FAST WARMING/DEFROSTING

1. Pour 40 ml distilled water into the bottle warmer (it is recommended to use distilled water to prevent scale).
2. Put the milk bottle into the bottle warmer.
3. Press the power button, the power light will turn on.Then press “ ” to choose the “Fast” function. See the express warming reference table as the followed to check how long the milk needs to be warmed and press “+” , “-” to adjust the time. The default heating time is 3 minutes. The bottle warmer will start working automatically in 5 seconds after you finished selecting the function.
4. The bottle warmer will count down automatically and the screen shows remaining heating time. Take the bottle out when the time is up to avoid over-heating. It will turn to ‘keep warm’, (MILK) setting, after the timer runs out in case you forgot to take the bottle out. In the MILK setting, the screen shows real-time WATER temperature. Don’t worry if the screen shows high temperature at this time, it’s not equal to the milk temperature. Higher temperature water is for warming faster in FAST setting. The water temperature will decrease to body temperature at the MILK setting and will be kept like that for 24 hours.
5. Before feeding, shake the milk well and make sure the temperature is suitable for feeding.

NOTE

1. The speed of warming milk depends on the amount of the milk warmed and on its initial temperature, i.e. room temperature (20°C) or fridge temperature (4°C).
2. When you find the milk is not warm enough, you can place the bottle back into the appliance for a maximum of 0.5-1 minute of extra warming. This will create a slightly warmer result but without overheating.
3. If you leave the bottle in the bottle warmer longer than the time indicated in the settings table, the milk may become overheated. If you overheat breast milk, valuable nutrients and vitamins may be lost.
4. Always check the temperature before you feed your baby. Gently shake the bottle or milk storage container and check the temperature of the milk by sprinkling a few drops on the inside of your wrist.

CAUTION: The water in the bottle warmer might be hot after finishing warming the milk/baby food. Be careful, the hot water can cause serious burns.

FAST WARMING/DEFROSTING

1. The time listed is a recommendation ONLY. This reference sheet DOES NOT provide accurate time due to different initial temperatures/bottle material/ambient temperatures etc will impact final the milk temperature.
2. Take the bottle out in time to avoid overheating. If you find the milk not warm enough, please place the bottle back into the appliance for a maximum of 0.5-1 minute of extra warming.
   Reference chart – Only for fast warming function

CONSTANT WARMING MILK AT 37°C/98.6°F

1. Fill the chamber with distilled water to the MAX line first then put the baby bottle into the bottle warmer.
2. Press the “ ” to choose “Milk” function. The default temperature is 37°C/ 98.6°F and you can also adjust the temperature you need by touching the “+”“-” buttons. The bottle warmer will start working automatically within 5 seconds after you finished selecting the function.
3. The screen shows the real-time temperature in degree centigrade after the warmer works. The milk will be ready in about an hour.
4. Before feeding, shake the milk well and make sure the temperature is suitable for feeding.
5. The bottle warmer will keep the milk/water precisely at the target temperature for 24 hours in “constant warming” to fit every baby’s preferences and to avoid the fluid to be too cold or overheated. (It is not recommended to heat the breast milk for too long).

NOTE: At this setting, you can warm your milk at a slow pace and keep it warm at the right end temperature. E.g. to warm a bottle of 120ml/4oz milk starting from room temperature, it will take 15-20 minutes. The warming time may be longer or shorter depending on the milk volume and initial temperature.

STERILIZING

1. Pour 100-150 ml distilled water into the bottle warmer. (It is recommended to use distilled water to prevent scale). Put the bottle shelf into the bottle warmer first then put the bottles and pacifiers upside down. Put the top lid on.
2. Press the “ ” to choose the “Sterilize” function. The bottle warmer will automatically start sterilizing 5 seconds after you finished selecting the function. Please take out the bottle/pacifier when the appliance makes a beeping sound.
3. When the appliance makes the beeping sound, you can stop it with the “ ” button.
4. Be careful not to get burned when you take the bottle out after the sterilization.

HEATING FOOD AT 70°C/158°F

1. Pour distilled water into the bottle warmer to the scale line (the scale line is inside the bottle warmer).
2. Put the baby food in a heat-resistant container and then put that container into the bottle warmer.
3. Press the “ ” button to select the “Food” setting. The default temperature is 70°C/158°F and you can also adjust the temperature you need by touching “+”or “-” buttons. The bottle warmer will start working automatically 5 seconds after you finished selecting the function.
4. The screen shows the real-time temperature in degree centigrade after the warmer starts working. Food will be ready in about an hour (frozen meat puree takes 3 hours).
5. Before heating and feeding, please remember to stir the food well and make sure the food is heated evenly.

NOTE:

1. Make sure to stir the baby food during the warming process as it does not circulate automatically.
2. Be careful to not burn your fingers when holding the container/jar while stirring.

CLEANING

• Unplug the bottle warmer and make sure it’s cooled down before cleaning.
• Do not immerse the working base in any fluids for cleaning.
• It is recommended to use distilled water to prevent scale. Acetic acid or other descalers can help you clean the scale efficiently.

DESCALING

It is recommended to descale the bottle warmer every four weeks to ensure it continues to work efficiently.

1. Mix 10 g citric acid cleaner with 200ml/3.4oz of cold water to descale the bottle warmer. Turn on the bottle warmer, select the STERILIZING FUNCTION then wait for 2-3 minutes after boiling, the descaling is completed.
2. Mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of cold water to descale the bottle warmer. Switch on the bottle warmer, select the MILK WARMING FUNCTION and wait for 10 minutes. Leave the solution in the bottle warmer until all scale has dissolved.

NOTE:

1. Never dry out
2. Do not use other types of descalers

WE ARE ALWAYS AVAILABLE FOR QUESTIONS
SALES@MEDIAEVOLUTION.NL

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>