Lepow Portable Display Z1 User Guide

: June 7, 2024
: Lepow

Table of Contents

Lepow Portable Display Z1
Package Contents
Monitor Introduction
Connect Monitor with Devices
Screen Rotate Setting
Monitor Standing Positions
Specifications
Supported Devices & Models
**
FAQ’S
VIDEO
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lepow Portable Display Z1

Package Contents

LEPOW Portable Monitor
Mini HDMI to HDMI Cable
Type-C to Type-C Cable
Type-C to USB A Cable (Power Supply)
Smart Cover
Screen Protector
Wall Charger
Warranty Card
Gift Card

Note: If any of the above items is damaged or missing, please l Lontact us immediately. E-mail: support@lepow.hk

Monitor Introduction

introduction

Speaker: Listen to music, movies, games, and multimedia files
Mini HDMI: Audio and video signal transmission
USB Type-C full function port: Power supply, audio and video signal transmission
3.5mm audio out port: Connect external speakers, headphones or digital audio equipment.

Type-C port (Power Supply Only): Power supply support, reverse charging, compatible with PD2.0 power supply protocol, support 5-20V voltage input
Roll Key: Press the Roll Key to enter the OSD (On-Screen Display) menu.
Scroll the Roll key up and down in the menu to control the cursor; Press the Roll key to confirm.
Scroll up the Roll Key in the main interface to open the brightness menu and adjust the brightness by up and down.
Scroll down the Roll Key in the main interface to open the volume menu, and up and down to adjust the volume.
Power Button/Return Button: Press button for 3 seconds to turn on/off the monitor; Press it for a short time to return to the previous page.

Connect Monitor with Devices

Connection Condition

This monitor does not have a built-in battery. Before connecting the monitor, please make sure it has enough power (5V/2A or above) comes in firstly.

Connect with external power supply
Firstly, connect your monitor to power supply (5V/2A or above) to give it enough power. Then connect monitor with your device.
Screen will show Power-Saving Mode or No Signal if it is not powered enough.
Connect without power supply
Only works under Type-C port connection. Make sure the Type-C port of your device is a full-featured Type C port.

LAPTOP(With Type-C)

Note: If you want to adjust the brightness and volume above 80%, please make sure the external power supply of 5V/2A or above be connected.

Note: Not all laptops with a Type-C port can work with Lepow monitor. Please check the Type C port of your laptop if it supports audio and video signal transmission.

PC/ Laptop (With HDMI Port)

Note: HDMI port does not support power transmission. It is a must to connect an extra power supply (5V/2A or above) if you use mini HDMI port for connection.

PHONE (With Type-C)

When there is no external power supply, the cell phone supplies Power to the monitor. (Energy-saving mode is activated; Brightness is automatically adjusted to 30%).
When the external power supply is connected, the monitor charges the mobile phone through the external power supply. (To ensure the monitor and the phone can get enough working current. please use at least 16W charger or power bank as the external power supply.)

Note: Only works directly with cell phone through full-featured type-C port. For I Phone: need a lightning to HDMI adaptor.

0ther Devices

Note: Please connect the power supply cable first and then Mini HDMI to HDMI Cable to ensure the smooth transmission of signals.

Duplicate & Extend Mode Setting

Connect your Lepow monitor to a power outlet and an available port on your PC.
Right-click the desktop and select eitherScreen resolution(Windows 7/8) or Display settings(Windows 10).
Click the Multiple displays drop-down list, and then select Extend these displays, or Duplicate these displays. Note if you cannot see the additional monitor(s) listed, click Detect. If does not work, try restarting your computer and do steps again.

Screen Rotate Setting

Connect your Lepow monitor to a power outlet and an available port on your PC.
Right-click the desktop and select either Screen resolution (Windows 7/8) or Display settings (Windows 10).
Click the Orientation drop-down list, and then select Landscape or Portrait screen.

Note if you cannot see the option of Orientation on your laptop/PC, Please check if your laptop/PC has this function.

OSD Function Introduction

Press the Roll Key to activate the OSD menu
Scroll the Roll Key up and down to choose your settings
Press Roll Key to confirm
Press Power Button to return to the previous page

OSD Setting- Brightness

Brightness: The adjusting range is from Oto 100.
Contrast: The adjusting range is from Oto 100.
Black Level: The adjusting range is from Oto 100.
Sharpness : The adjusting range is from Oto 100.

Note: When the brightness is adjusted to 80, the screen will turn to black if you do not connect an external power supply of 5V/2A or above.

OSD Setting- Image

ECO: Contains Six modes( Standard/ Game/ Movie/ Text/ FPS/ RTS Modes)
OCR : Select ON or OFF to enable or disable dynamic contrast ratio function. Aspect: Adjusts the aspect ratio to 4:3 I 16:9
Aspect : Adjusts the aspect ratio to 4:3 I 16:9

Note: When the brightness is adjusted to 80, the screen will turn to black if you do not connect an external power supply of 5V/2A or above.

OSD Setting- Color Temp

Color Temp: Contains two preset color modes (Cool, Warm) and User Mode.
Red: The adjusting range is from Oto 100.
Green: The adjusting range is from Oto 100.
Blue: The adjusting range is from Oto 100.

OSD Setting

Language: Select OSD language. The selections are: English, French, German, Simplified Chinese, Italian, Spanish, Portuguese, Turkish, Polish, Nederlands, Japanese, Korean
OSD Timer: The adjusting range is from Oto 100.
Transparency: The adjusting range is from Oto 100.

OSD Setting- Reset Reset: Selects RESET to revert all settings to the factory default mode. MUTE: Select ON or OFF to
Volume: The adjusting range is from Oto 100.

OSD Setting- Color Temp

Signal Source: Contains two signal sources Type C and HDMI.
Low Blue Light: The adjusting range is from O to 100.(0/25/50/75/100) HDR MODE: Select ON or OFF to open HDR mode.

Monitor Standing Positions

You can stand up the monitor by several positions with the smart cover.

Specifications

Product Name: Lepow Type-c Portable Monitor
Net Weight: 770g
Visual area: 344.16*194.59mm
Screen Size: 15.6 inch
Panel type: IPS
Dimension: 368 225 8.8 mm
Aspect ratio: 16:9
Resolution: 1920*1080
Display color: 16.7M
Color temperature: 6800K
Visual angle: H: 85°/85°Min V: 85°/85°Min
Contrast ratio: 1000:1
Color gamut: 85%
Input Interface: Mini HD(Video signal), Type C full function (Video data, Power supply ISDN) , Type C power supply
Output Interface: 3.Smm headphone interface
Speaker: Built-in speakers (1W*2)
Refresh Rate: 60 Hz
Specifications are subject to change without notice.

Supported Devices & Models

Phone

Brand Model
SAMSUNG DEX, 58/59/510/520 Series.Note 8/Note 9/ Note 10 Series
HUAWEI Mate 10/Mate 20/Mate 30 Series, Mate RS, P20/P30/P40 Series
HONOR NOTE 10, V20/V30 Series
OPPO BR17 Pro, Reno, Find
Razer Razer Phone, Razer Phone 2
HTC U Ultra
LG G5,G6,G7
ASUS ROG Gaming Phone
More Brands Update Continously

Laptop

**

LAPTOP Care & Cleaning **

Cleaning. Turn your monitor off and unplug the cable. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
When the screen becomes black or flashes, or cannot work anymore, contact our tech support to fix it. Do not repair the screen by yourself! support@lepow.hk

Notices

Before setting up this Type-c Portable Display, carefully read all the documentation that came with the package.
To prevent fire or shock hazard, never expose this Type-c Portable Display to rain or moisture.
Never try to open this Type-c Portable Display cabinet.
Before using this Type-c Portable Display, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact our tech support (support@lepow.hk) immediately.
Avoid dust. humidity, and temperature extremes. Do not place this Type-c Portable Display in any area where it may become wet. Place this Type-c Portable Display on a stable surface.
Never push objects or spill liquid of any kind into the slots on this Type-c Portable Display cabinet.
If you encounter technical problems with this Type-c Portable Display, contact our tech support support@lepow.hk immediately.

FAQ’S

How to connect the display to my PC?

It is very easy to connect the display to your computer. Just plug the Type-C cable into the Type-C port of your computer, and then you can use it.

How to connect the display to my phone?

You need a Type-C cable (Type-C to USB A cable) for connecting your phone to the display. The cable is not included in the package. Please purchase it separately.

How can I control the volume?

You can control the volume by pressing the Volume Up/Down button on the right side of the monitor.

How can I change the input mode?

You can change the input mode by pressing the Input button on the right side of the monitor.

How can I adjust brightness?

You can adjust brightness by pressing and holding down on or Roll Key in OSD menu.

How do I turn off or put my monitor into sleep mode?

Press and hold down on or Roll Key for 3 seconds, then release it, and you will enter sleep mode. When you want to wake up, press any key on your keyboard or press any button on your mouse.

How do I make my lepow portable monitor brighter?

Roll Key: Press the Roll Key to enter the OSD (On-Screen Display) menu. Scroll the Roll key up and down in the menu to control the cursor; Press the Roll key to confirm. Scroll up the Roll Key in the main interface to open the brightness menu and adjust the brightness by up and down.

Do I need to charge the lepow portable monitor?

There’s no built-in battery, which saves a few pounds. It also saves you the need to charge your monitor. However, this also means that your monitor needs to be constantly plugged in. If you’re using an HDMI connection, you can use the included USB Type-C cable and AC adapter to plug into a wall outlet

Why is my 2nd monitor not displaying?

Turn the computer off and on to refresh the connection. Use the monitor’s built-in controls and select the correct input port. Check the signal cable connection between the monitor and the graphics card. Disconnect the signal cable from both ends, wait 60 seconds, and firmly reconnect it.

How many watts does a lepow portable monitor use?

The lepow monitor consumes on average 2.9 W and 7 W when on the minimum and maximum brightness settings, respectively. A generic USB Type-C charger can power the display so long as it outputs at least 5V/2A.

Do lepow monitors use a lot of electricity?

The U.S. Department of Energy estimates that a 19-in. LCD monitor used in an office consumes about 99.8kWh of power per year. For a 17-in. monitor, the estimated energy use is 85.71kWh annually.

How do I connect my Iphone to my lepow monitors?

Power adapter. So you’ll want to plug that in to any available socket. And then you’ll want to connect. The usbc cable that we include for the portable monitor to that power adapter.