TAGG Inferno Wireless Bluetooth Headphone with Mic User Manual

June 7, 2024
TaGG

logo

TAGG Inferno Wireless Bluetooth Headphone with Mic

product

Thank you for purchasing TAGG Inferno wireless earphones with Bluetooth v.4.1 and echo elimination technology. Our primary goal is to please you with superior sound quality and comfort combined with convenience of hands free operation. Here is some useful piece of information that will help you operate this earphone properly:”

image 1 FUNCTION                              OPERATION

Power ON                                 Long press the HOME button for 3 secs
Power OFF                                Long press the HOME button for 3 secs
Pairing Mode                             Blue and Red LED will start blinking
Connected                                 Blue LED will blink
Answer Call                               Short press the HOME button
End Calls                                   Short press the HOME button
Change Track                            Long press the Volume “ +” & “-”
Volume “+” & “-”                     Press the “+” & “-” button
Mic Volume                               Press the “+” & “-” button while on call

Connecting with your device:

  • Keep your bluetooth device with in 3 Ft. while pairing.
  • Press the POWER button of TAGG inferno earphone for 3 secs.
  • Blue and Red LED will blink and earphone is in the pairing mode.
  • Now search for available bluetooth devices in your
  • Mobile/Laptop/iPad and select TAGG inferno from the list of available devices.
  • If prompted, enter password or PIN required “0000”.
  • If prompted by your mobile phone to connect, click “YES”. After successfully connecting Blue LED will flash twice after every 4 secs.

How to charge:

  • Connect to power using Micro USB.
  • To better protect the battery life, kindly use only the charging cable provided with the earphone .
  • Allow 1-2 hours to completely charge the earphone.

LED Indications:

  • While charging – Red LED is On.
  • When completely charged there will be no light.
  • When battery is low, Red LED blinks every four seconds twice and the voice prompt will let you know that battery status.
  • Pairing mode- Blue and Red LED starts flashing.

Reconnect the earphone:

  • If the connection is lost, TAGG inferno will try to reconnect automatically.
  • If it does not reconnect, kindly press the POWER button for 3 secs and reconnect manually through your mobile bluetooth.

Common problems and solutions:

  • Mobile can’t find the earphone:
  • Kindly restart your phone and the earphone.

There’s always noise and the bluetooth keeps disconnecting:

  • The earphones needs to be charged.
  • Make sure you are not beyond the signal distance.

Bluetooth is connected but you are unable to listen to music:

  • Check your device setting to adjust the sound on hands free mode.
  • Some devices require you to select the device twice.
  • Some devices do not have complete stereo bluetooth, kindly connect the earphone with another device to check if it is functioning properly.

Bluetooth password:
“0000”
Maximum distance:
20 ft.

Red LED is not ON while charging:

  • This could be due to lack of use of earphone. It needs to be charged for 30 min before the Red LED occurs.

Reset to factory setting:

  • When the Earphones are off, hold the power button for about ten seconds until the red led flashes once- RESET.

Accessories :

  • 1 x TAGG Inferno earphone
  • 1 x Charging cable
  • 3 x Silicon ear tips
  • 1 x Cable clip

image 2

Safety rules:

  • Avoid overcharging.
  • Do not keep the earphone in closed area and avoid being exposed to hot temperature.
  • Never disassemble or modify your earphone because of any reason.
  • Make sure the device does not get wet.

Exceptional warranty:
We offer simply the best, customer support that will never rest until you are absolutely satisfied!
TAGG products come with 12 months replacement warranty. Product registration is mandatory on our website within 15 days of your purchase in case you want to claim the warranty.

Thank you very much for choosing TAGG as your trusted brand of bluetooth earphone and we sincerely hope you enjoy the great sound and comfort TAGG provides. We love making our customers happy by providing true value with our products. If for any reason you are not completely satisfied with your purchase let us know immediately and we will do anything to make sure you are happy.

Contact Us :support@taggdigital.com
Website :www.taggdigital.com
Contact No. : +918448010020

We are Social, Follow us on:-

https://www.facebook.com/TAGGDigital/
https://twitter.com/TAGGOfficial
https://www.instagram.com/tagg_digital/
https://www.youtube.com/channel/ logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals