CORVER 501-159WGY Accent Table Instruction Manual

June 1, 2024
CORVER

CORVER 501-159WGY Accent Table

Product Information

  • Specifications
    • Brand: Corvus
    • Model: 501-159WGY
    • Recommended   Use: Not recommended for commercial use

Product Usage Instructions

  • Assembly Instructions
    • Follow the steps below to assemble the product:
    • Identify the parts included in the package.
    • Assemble part A using 12 pieces (A-12X).
    • Attach part B (1X) to part A.
    • Secure part C using 12 pieces (C-12X).
    • Attach part D (4X) as indicated in the manual.
  • Safety Precautions
    • Ensure that the product is on a flat and stable surface. Avoid over-tightening screws to prevent damage.
  • Cleaning and Maintenance
    • Regularly clean the product with a damp cloth and mild detergent. Avoid using harsh chemicals that may damage the finish.
  • Storage
    • Store the product in a dry and cool place when not in use to prevent deterioration.
  • Usage Tips
    • Follow the assembly instructions carefully to ensure the stability and durability of the product.

FAQs

  • Q: Can this product be used commercially?
    • A: No, this product is not recommended for commercial use as per the manufacturer’s guidelines.

ASSEMBLY INSTRUCTIONS

  • Congratulations on your purchase – Get ready to be inspired!
  • Please check to ensure that all parts are included.
  • Contact the place of purchase for any service issues. Keep this document for reference in case parts are needed.
  • THIS ITEM IS NOT RECOMMENDED FOR COMMERCIAL USE

IMPORTANT

  • MUST READ BEFORE ASSEMBLY!
  • FOR YOUR FOLLOW THE FOR ATON ONE EN TO PER MENTO YOU’RE ARE NOSEAR

BASIC ASSEMBLY TECHNIQUES

  1. Before attaching each of the screws, make sure that the smaller lock washer is between the larger washer and the head of the screw.
  2. Position each part correctly and insert all screws into their respective holes. Then, hand-tighten only until 70% tight. Complete tightening with the tools will come at a later step.
  3. Make sure the furniture rests on a flat and level surface with each leg evenly touching the ground. Use a soft blanket or carpet underneath when turning the piece on its side.CORVER-501-159WGY-Accent-Table-FIG-1 \(1\)
  4. Some furniture comes with optional height adjustment knobs underneath each leg. Turn this knob counterclockwise to raise the leg level or clockwise to lower the lea level.
  5. Finally, make sure all parts are properly aligned then use the included tools to completely tighten the screws. Your furniture is now ready for use.
  6. Store the tools for later maintenance. Tighten the screws again after two (2) weeks, and then at least once every six (6) months after that.CORVER-501-159WGY-Accent-Table-FIG-1 \(2\)

IT IS THE USER’S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE SCREWS MAY LOOSEN OVER TIME AND CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS CAN LEAD TO COLLAPSE AND CAN CAUSE SERIOUS INJURY. FAILURE TO FOLLOW THE GUIDELINES ABOVE MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE.  CORVUS 501-159WGY ASSEMBLY INSTRUCTIONS/INSTRUCTION D’ASSEMBLAGE

PARTS AND TOOLS

CORVER-501-159WGY-Accent-Table-FIG-1 \(3\)

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals