iTime Temperature Detection Smartwatch TB1-T User Manual

: June 2, 2024
: iTime

Smart Intelligent Temperature Detection Bracelet

1，Adapt platform requirements：

Requirements

2，Before using

Please make sure the bracelet has enough power for the first time, if the power cannot be started, please charge the bracelet first.
Instruction

3, “Lefun Health”APP download

Scan the QR code to download
Search “Lefun Health” app from App store or Android market

4，Match the bracelet with phone

Long press the touch button to turn on, please make sure that the bluetooth of the mobile phone is enabled. Open the mobile APP- click the function bar in the upper left corner – click the APP icon – click “search” – select the MAC string code that matches the bracelet to show “bluetooth request pairing” and click “pair and connect”;

5，Operation

Long press for 6 seconds to power on and the bracelet is connected. Synchronize time and date of the phone; The APP can synchronize the movement status of the bracelet, such as“Sleeping, heart rate, blood pressure and other data” Long press the ‘power off’button to turn off.

6，Function

Home: dial can be switched, display time, date, power;
Function

Measuring Temperature:

Wear it on the wrist and adjust it close to the wrist. In order to measure the temperature accurately, it is recommended to measure the temperature after wearing it for about 10 minutes and test it for about 3 minutes, which will show the body surface temperature and body temperature.

Step-counting:

Count the steps for the whole day, clear it at 00:00am every day, you can check the historical steps in the APP;

Sport Mode:

Record the duration of exercise, clear it at 00:00am every day, you can check the historical steps in the APP;

Measuring Oxygen:

When the function is switched to the blood oxygen interface, the measurement will automatically start. The result is transferred to the APP for saving;

Measuring Heart rate:

When the function is switched to the heart rate interface, the measurement will automatically start. The result is transferred to the APP for saving;

Sleeping Monitoring:

Record the duration of your sleeping, clear it at 00:00am every day, you can check the historical steps in the APP;

Measuring Blood Pressure:

When the function is switched to the heart rate interface, the measurement will automatically start. The result is transferred to the APP for saving;

Smart Alarm:

Open the ‘sedentary reminder’ from the “bracelet function Settings”in the app, Switch, set duration, etc., the bracelet will vibrate when it is time;

Messages Reminder:

After the bracelet and APP match successfully, the mobile phone receives the WhatsApp, WeChat, SMS and other application messages, the bracelet will be brighten the screen and vibrate.

Incoming Call Reminder:

After the bracelet is paired with the APP, when there is incoming call, it willdisplay the contacts information;

Shake to Take Photos:

Open this function in the APP “bracelet function Settings”. After that, click “shake to take photos” function to enter the interface;

Find Bracelet:

Click “find bracelet” function, and the bracelet will vibrate.

Factory Reset:

Set the time to the previous day or the forward day in the mobile APP to synchronize then can clear the bracelet data.

Basic Specification

Specification

Notice:

Don’t wear them for bathing or swimming.
Please connect the bracelet when synchronizing data.
Do not expose the band to high moisture,extremely high/low temperature for long periods of time.
If the bracelet dies and restarts. Please check the phone’s memory information to clear and try again, or return the APP and open it again.