BLACKBIRD 4K HDMI Signal Manager USER’S MANUAL
- June 7, 2024
- BLACKBIRD
Table of Contents
4K HDMI®
Signal Manager
PN 15242
USER’S MANUAL
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference.
- This device is intended for indoor use only.
- Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the device. If moisture does get in or on the device, immediately remove it from its power source and allow it to fully dry before reapplying power.
- Do not touch the device, the power cord, or any other connected cables with wet hands.
- Do not expose this device to excessive vibration, extreme force, shock, or fluctuations in temperature or humidity.
- Do not expose this device to excessively high temperatures. Do not place it in, on, or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
- Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water.
- This device has no user-serviceable parts. Do not attempt to open, service, or modify this device.
INTRODUCTION
This ultrathin 4K HDMI® Signal Manager is designed to enhance compatibility between HDMI source devices and displays. It supports resolutions up to 4K@60Hz YCbCr 4:2:0, including 1080p and 3D video. It provides an EDID® bypass function to ensure the best possible output resolution. It is HDMI bus-powered and requires no external power supply.
FEATURES
- Supports HDMI® resolutions up to 4K@60Hz YCbCr 4:2:0, including 1080p and 3D video
- Input supports HDCPTM 2.2
- Supports EDID® bypass and auto-input resolution, ensuring the best possible output resolution
- Supports input cable lengths up to 32 feet (10m) and output cable lengths up to 16 feet (5m)
- HDMI bus-powered, no external power supply required
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the website for support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the
items listed below. If anything is missing or damaged, please contact
Monoprice Customer Service for a replacement.
1×4K HDMI Signal Manager
1× Hook and Loop Tape
1× User’s Manual
PRODUCT OVERVIEW
1. POWER LED: The LED illuminates green when power is applied.
2. IN: HDMI® port for connecting the video source device.
3. OUT: HDMI port for connecting the video display.
SAMPLE CONNECTION DIAGRAM
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com or through email by sending a message to tech@monoprice.com. Check the website for support times and links. To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and type the P/N into the search bar. If available, support files are linked at the bottom of the product page.
SPECIFICATIONS
| P/N | 15242 |
|---|---|
| Input | l× HDMI® |
| Output | l× HDMI |
| Maximum Resolution | 4K@60Hz YCbCr 4:2:0 |
| Video Bandwidth | 10.2 Gbps |
| HDCPTM Standard | Input supports HDCP 2.2 |
| EDID® Management | EDID pass-through |
| Transmission Distance | Input: up to 32 feet (10m) Output: up to 16 feet (5m) |
| Power Consumption | 1 watt |
| Operating Temperature | +14∼+131°F (-10 ∼ +55°C) |
| Operating Humidity | 10 ∼ 90% RH, noncondensing |
| Dimensions | 3.0″ × 1.8″ x 0.5″ (75 x 46 x 12 mm) |
| Weight | 1.8 oz. (50g) |
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Modifying the equipment without Monoprice’s authorization may result in the
equipment no longer complying with FCC requirements for Class B digital
devices. In that event, your right to use the equipment may be limited by FCC
regulations, and you may be required to correct any interference to radio or
television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Monoprice™, Blackbird™, the Blackbird logo, and all Monoprice logos are trademarks of Monoprice Inc. HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. EDID® is a registered trademark of the Video Electronics Standards Association. HDCPTM is a trademark of Digital Content Protection LLC. Blu-ray Disc™, Blu-ray™, and logos are trademarks of the Blu-ray Disc Association.
TECHNOLOGY AT
PRICES THAT MAKE SENSE
Need Help? We’re here for you! Contact us
www.monoprice.com/contactus
Product pictures are for reference only. Specifications described herein are
subject to change without prior notification.
All trademarks are the sole property of their respective companies.
BlackbirdTM is a Sub-brand of Monoprice Inc.
Copyright © 2021 Monoprice, Inc. All rights reserved.
www.monoprice.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>