BLACKBIRD 42273 H.265 HDMI Over IP KVM Extender User Manual
- June 6, 2024
- BLACKBIRD
Table of Contents
BLACKBIRD 42273 H.265 HDMI Over IP KVM Extender User Manual
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference.
- This device is intended for indoor use only.
- Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the device. If moisture does get in or on the device, immediately remove it from its power source and allow it to fully dry before reapplying power.
- Do not touch the device, the power cord, or any other connected cables with wet hands.
- Do not expose this device to excessive vibration, extreme force, shock, or fluctuations in temperature or humidity.
- Do not expose this device to excessively high temperatures. Do not place it in, on, or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
- Do not place or install this device in an area where it can be exposed to excessive amounts of dust, humidity, oil, smoke, or combustible vapors.
- Prior to operation, check the unit and power cord for physical damage. Do not use if physical damage has occurred.
- Before plugging the unit into a power outlet, ensure that the outlet provides the same type and level of power required by the device.
- Unplug this device from the power source when not in use.
- Take care to prevent damage to the power cord. Do not allow it to become crimped, pinched, walked on, or become tangled with other cords.
- Ensure that the power cord does not present a tripping hazard.
- Never unplug the unit by pulling on the power cord. Always grasp the connector head or adapter body.
- Ensure that power is turned off and disconnected before making any electrical connections.
- Remove the batteries from the controller if it will go unused for a lengthy period of time.
- Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water.
- This device has no user serviceable parts. Do not attempt to open, service, or modify this device.
INTRODUCTION
This H.265 HDMI® over IP KVM Extender allows you to extend an HDMI
audio/video, USB data, and IR control signals to distances up to 492 feet (150
meters) over a single Cat5e/6 Ethernet cable.
It complies with the HDMI 1.4, HDCP™ 1.4, and USB 1.1 standards. It
supports video resolutions up to 1920×1200@60Hz with YCbCr 4:4:4 color space.
It uses standard H.265 video compression, supports up to 6.75 Gbps video
bandwidth, and supports one-way transmission of IR control signals.
The kit includes an encoder and a decoder and can be used in a one-to-one
configuration, but it also supports the use of a Gigabit Ethernet switch,
allowing the encoded signals to be transmitted to multiple decoders for whole
home video distribution.
FEATURES
- Extends HDMI® audio/video, USB data, and IR control signals to distances up to 492 feet (150 meters)
- Supports video resolutions up to 1920×1200@60Hz with YCbCr 4:4:4 color space
- Provides up to 6.75 Gbps video bandwidth
- Complies with the HDMI 1.4, HDCP™ 1.4, and USB 1.1 standards
- Uses standard H.265 video compression
- Supports distribution to multiple decoders using a Gigabit Ethernet switch
- Includes USB mouse and keyboard ports on the decoder to allow remote control of a connected computer
- Supports one-way transmission of IR control signals in the 20Hz ~ 60kHz frequency range
- Supports 2-channel LPCM audio with support for 32kHz, 44.1kHz, and 48kHz sampling rates
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the website for support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement.
- 1x KVM Encoder
- 1x KVM Decoder
- 1x IR Transmitter
- 1x IR Receiver
- 2x AC Power Adapters (5 VDC, 1A)
- 1x User’s Manual
PRODUCT OVERVIEW
Encoder
- DC 5V: DC barrel connector for connecting the included AC power adapter.
- LAN: RJ45 jack for connecting a Cat5e/Cat6 Ethernet cable (not included) to the decoder.
- IR OUT: 3.5mm jack for connecting the included IR transmitter.
- HDMI IN: HDMI® port for connecting the video output from a computer or other video source device.
- PC: USB Type-B jack for connecting a USB cable (not included) to your PC.
- DATA: The LED flashes orange when data is being transmitted.
- POWER: The LED illuminates green when power is applied.
Decoder
- DC 5V: DC barrel connector for connecting the included AC power adapter.
- LAN: RJ45 jack for connecting the Cat5e/6 Ethernet cable (not included) from the encoder.
- IR IN: 3.5mm jack for connecting the included IR receiver.
- HDMI OUT: HDMI® port for connecting an HDMI display.
- MOUSE/KEYBOARD: Two USB Type-A ports for connecting a USB mouse and keyboard (not included) for control of a computer connected to the encoder.
- DATA: The LED flashes orange when data is being transmitted.
- POWER: The LED illuminates green when power is applied.
SAMPLE CONNECTION DIAGRAM
One-to-One
One-to-Multiple
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist
you with any questions you may have about installation, setup,
troubleshooting, or product recommendations. If you ever need assistance with
your new product, please come online to talk to one of our friendly and
knowledgeable Tech Support Associates. Technical support is available through
the online chat button on our website
www.monoprice.com or through email by sending a
message to tech@monoprice.com. Check the website for
support times and links.
To download the latest drivers, firmware, manuals, etc., go to
www.monoprice.com and type the P/N into the search
bar. If available, support files are linked at the bottom of the product page.
SPECIFICATIONS
P/N | 42703 |
---|---|
Supported Video Resolutions | 640×480@60Hz ~ |
1920×1200@60Hz
Video Bandwidth| Up to 6.75 Gbps
HDMI® Version| 1.4
HDCP™ Version| 1.4
---|---
USB Version| 1.1
Color Depth| 8/10/12-bits/channel
Supported Color Spaces| RGB, YCbCr 4:4:4/4:2:2
Compression Technology| H.265
Supported Audio Format| 2-channel LPCM
Supported LPCM Sampling Rates| 32kHz, 44.1kHz, 48kHz
IR Frequency Range| 20Hz ~ 60kHz
Maximum Cat5e/6 Ethernet Cable Length| 492 feet (100 meters)
Maximum HDMI® Cable Length| 49 feet (15 meters)
Input Power| 5 VDC, 1A
AC Adapter Input Power| 100 ~ 240 VAC, 50/60 Hz
Encoder Power Consumption| 1.4 watts
Decoder Power Consumption| 1.7 watts
Operating Temperature| +32 ~ +104°F (0 ~ +40°C)
Storage Temperature| -4 ~ +140°F (-20 ~ +60°C)
HDCP™ Version| 1.4
---|---
USB Version| 1.1
Color Depth| 8/10/12-bits/channel
Supported Color Spaces| RGB, YCbCr 4:4:4/4:2:2
Compression Technology| H.265
Supported Audio Format| 2-channel LPCM
Supported LPCM Sampling Rates| 32kHz, 44.1kHz, 48kHz
IR Frequency Range| 20Hz ~ 60kHz
Maximum Cat5e/6 Ethernet Cable Length| 492 feet (100 meters)
Maximum HDMI® Cable Length| 49 feet (15 meters)
Input Power| 5 VDC, 1A
AC Adapter Input Power| 100 ~ 240 VAC, 50/60 Hz
Encoder Power Consumption| 1.4 watts
Decoder Power Consumption| 1.7 watts
Operating Temperature| +32 ~ +104°F (0 ~ +40°C)
Storage Temperature| -4 ~ +140°F (-20 ~ +60°C)
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Modifying the equipment without Monoprice’s authorization may result in the
equipment no longer complying with FCC requirements for Class B digital
devices. In that event, your right to use the equipment may be limited by FCC
regulations, and you may be required to correct any interference to radio or
television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Monoprice™, Blackbird™, the Blackbird logo, and all Monoprice
logos are trademarks of Monoprice Inc.
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
HDCP™ is a trademark of Digital Content Protection LLC.
Blu-ray Disc™, Blu -ray™, and the logos are trademarks of the
Blu-ray Disc Association.