JBL Quantum 600 Wireless Headphone User Guide
- June 7, 2024
- JBL
Table of Contents
600
QUICK START GUIDE
JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum
headsets – from headset calibration to adjusting 3D audio to suit your
hearing, from creating customized RGB lighting effects to determining how the
boom microphone side-tone works.
JBLquantum.com/engine
Software requirements
PLATFORM: Windows 7 / Windows 10 (64 bit) only 500MB of free hard drive space
for installation
Always use the latest version of Windows 10 for the most optimal experience on JBL QuantumENGINE
JBL QuantumSURROUND and DTS Headphone:X V2.0 available on Windows only. Software installation required.
001 WHAT’S IN THE BOX
002 Requirements
JBL QuantumENGINE SOFTWARE REQUIREMENTS
PLATFORM: Windows 7 / Windows 10 (64 bit) only 500MB OF FREE HARD DRIVE SPACE
FOR INSTALLATION
System compatibility
PC | Xbox™ | PlayStation™ | Nintendo Switch™ | Mobile | MAC | VR
| CONNECTIVITY | PC | PS4 | XBOX TM | NINTENDO SWITCH TM | MOBILE | MAC | VR |
|---|---|---|---|---|---|---|---|
| 3.5 mm Audio Cable | Stereo | Stereo | Stereo | Stereo | Stereo | Stereo | Stereo |
| 2.4G Wireless | JBL QuantumSURROUNDTh” 1 Co\lc, 5 DTS HEADPHONE:X V2 | ||||||
| Stereo | Not Compatible | Not | |||||
| Compatible | Not | ||||||
| Compatible | Stereo | Stereo |
003 OVERVIEW
01 Game audio-chat balance dial
02 Volume Control
03 Detachable Windshield foam
04 Notification LED for mic mute / unmute
05 RGB-lit JBL logo
06 CHARGING LED
07 3.5mm Audio Jack
08 USB-C port
09 Voice Focus Boom Microphone
10 Flat-fold ear cup
11* Microphone Mute / unMute
12 POWER / 2.4G LED
13 POWER ON / OFF slider
14 2.4G PAIRING BUTTON
15 Volume Control
16 MIC MUTE BUTTON
004 POWER ON & CONNECT
005 SETUP
006 BUTTON COMMAND
007 First time setup
7a Connect the headset to your PC via 2.4G USB wireless connection.
7b Go to “Sound Settings” -> “Sound Control Panel”.
7c Under “Playback” highlight “JBL QUANTUM600 GAME” and select “Set Default”
-> “Default Device”.
7d Highlight “JBL QUANTUM600 CHAT” and select “Set Default” ->“Default
Communication Device”.
7e Under “Recording” highlight “JBL QUANTUM600 CHAT” and select “Set Default”
-> “Default Device”.
7f In your chat application select “JBL QUANTUM600 CHAT” as the default audio
device.
7G Follow the onscreen instructions to personalize your sound settings.
008 MICROPHONE
009 CHARGING
010 LED BEHAVIOURS
011 TECH SPEC
Driver size: 50 mm Dynamic drivers
Frequency response: 20 Hz – 20 kHz
Microphone frequency response: 100 Hz -10 kHz
Max input power 30 mW
Sensitivity: 100 dB SPL @1 kHz / 1 mW
Maximum SPL: 97 dB
Microphone sensitivity: -40 dBV @1 kHz / Pa
Impedance: 32 ohm
2.4G Wireless transmitter power: <4 dBm
2.4G Wireless modulation: π/4-DQPSK
2.4G Wireless carrier frequency: 2403.35 MHz – 2479.35 MHz
Battery type: Li-ion battery (3.7 V / 1000 mAh)
Power supply: 5 V 2 A
Charging time: 2 hrs
Music playtime with RGB lighting oFF: 14 hrs
Microphone pickup pattern: Unidirectional
Weight: 346 g