Maono Podcasting Microphone Kit User Manual

Maono Podcasting Microphone Kit User Manual

Specifications

Features

• Large capsule with plated membrane
• Cardioid polar patter
• Ultra-low noise transformerIess circuitry
• New, state-of-the-art surface mount electronics
• Heavy-duty satin nickel finish
• Stable metal boom arm system with pop filte
• Boom arm with 2-axis swivel mount for accurate positioning
• Built-in Sound card, Plug and Play operation for PC, MAC. Setup is so easy–just connect and go.

Microphone Placement

The logo of “M” on the body of the microphone indicates the front of the microphone, and the pick-up area of the cardioid pattern. Please be sure to have the side of the logo facing the sound source you wish to record. As with many other  aspects of the recording process, finding the preferred sound is a matter of experimentation.

Accessories

1. Cable
   

2. Pop filter
   

3. Anti-wind Foam Cap

4. Shock Mount
   

5. Table Clamb

6. Microphone stand
   

Recording vocals

• We strongly recommend using the pop filter for all vocal recording. This aids in minimizing plosive sounds (hard P, Tand Ksounds) that produce a sudden jet of air which can cause the capsule to overload and produce a popping sound
• Any moisture on the microphone capsule can cause problems for condenser microphones, however the use of the pop shield will reduce the risk of this occurring.
• Placement of the microphone and pop filter relative to the vocalist may be varied on several factors including room acoustics, the vocal performance, and whether the vocalist has a high or deep voice.
• An ideal reference is to begin with the pop filter directly in front of the vocalist, and approximately 15cm (6) away from the microphone. This will assist in keeping the performer at a constant minimum distance from the microphone and helps to maintain reasonable recording levels
• Experimentation should be made with the angle from which the microphone  is addressed, as different results can be achieved when the vocalist isoff-axisto the microphone.

Install stand on table

1. Screw the TABLE CLAMP on the edge of a table.
2. Insert the ADJUSTABLE ARM into the hole.
3. Fasten the screw.
4. Fix Shock mount with Microphone stand.

Note: if you can’t use the microphone. please check the software audio settings.

For window system:
control panel ->sound >Recording >Microphone.

• Application setting: (Example skype) click 1 2 3 in sequence

• For IOS system: Setup – >sound  >Input >Realtek USB.0 Audio
  

Processional microphone manufacturer

Maono technology Co., Ltd.
4B, Building No.45, Software Town of Universiade, No. 8288 Longgang Rd., Longgang District, Shenzhen, PRC
Tel : +86 755 82934327
Fax : +86 755 8293 4365
www.maono.com

Support:
Support@maono.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>