TIMEX Retro Digital Wrist Watch User Guide

: June 7, 2024
: Timex

Table of Contents

EXTENDED WARRANTY
FEATURES
BASIC OPERATION
SET TIME-DATE
ALARM
CHRONOGRAPH
TAKING SPLITS
TIMEX INTERNATIONAL WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

W116 555-095000-03 8.24.20
Register your product at https://www.timex.com/product-registration.html

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5- digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O.Box 1676, Dept.EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex® watch. Your model may not have all of the features described in this booklet.

FEATURES

Time and date (12/24-hour format)

Hourly chime
Daily alarm
24-hour chronograph
INDIGLO®night-light

BASIC OPERATION

TIMEX Retro Digital Wrist Watch

SET TIME-DATE

Press MODE until Time display appears.
Press SET. Seconds will ﬂash. Press START/STOP to set to 00.
Press MODE. Minutes will ﬂash. Press START/STOP to advance.
Press MODE. Hour (with A/P) will ﬂash. Press START/STOP to advance.
Press SPLIT/RESET to switch between 12- and 24-hour format.
Press MODE to continue setting month, date and year.
Press SET to exit at any time.
In Time display, press START/STOP to turn hourly chime on/off. Colon will ﬂash when on.

ALARM

Press MODE until “ALARM” appears in upper left of display.
Alarm time appears at top of display.
Press SET. Hour will ﬂash. Press START/STOP to advance.
Press MODE. Minutes will ﬂash. Press START/STOP to advance.
Press SET to exit at any time. Alarm is automatically armed.
When alarm is armed, appears here and in Time display.
In Alarm mode, press START/STOP to arm/disarm alarm.
When alarm sounds, press any button to silence. Alarm remains armed and will continue to occur daily.

CHRONOGRAPH

TIMEX Retro Digital Wrist Watch CHRONOGRAPH

Press MODE until “CHR” appears.
Press START/STOP to start chrono.
Press START/STOP to stop.Press again to continue.
When chrono is stopped, press SPLIT/RESET to reset chrono to zero.

TAKING SPLITS

While the chrono is running, you may freeze the display, to see your time at a particular point. This is called “taking a split.” To take a split, press SPLIT/ RESET while the chrono is running.
“SPLIT” appears and the display will freeze for ten seconds before showing the running chrono again.You may skip the ten-second freeze by pressing
MODE.
If you exit Chrono mode with the chrono running, it will continue to run.In the Time display, “CHR” will ﬂash.

INDIGLO®NIGHT-LIGHT
button to activate night-light.Electroluminescent technology used in INDIGLO® Press INDIGLO®night-light illuminates entire watch face at night and in low light conditions
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or ( ) is indicated.

Water-Resistance Depth

|

*p.s.i.a. Water Pressure Below Surface**

---|---

30m/98ft

| 60

50m/164ft

|

86

100m/328ft|

160

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

Watch is water-resistant only as long as lens, push buttons and case remain intact.
Watch is not a diver watch and should not be used for diving.
Rinse watch with fresh water after exposure to salt water.

TIMEX INTERNATIONAL WARRANTY

http://www.timex.com/productWarranty.html
©2020 Timex Group USA, Inc. TIMEX, INDIGLO and NIGHT-MODE are registered trademarks of Timex Group B.V.and its subsidiaries.