ACCESS SYSTEMS Professional Residential Exit Wand Instruction Manual
- June 7, 2024
- ACCESS SYSTEMS
Table of Contents
PROFESSIONAL RESIDENTIAL
INSTALLATION MANUAL
WARNING
When an EXIT WAND is in use, the automatic gate opener could be activated by a child on a bicycle or other metal play equipment. This Product is not recommended for applications exposed to children.
Gates that Open, LLC • 3121 Hartsfield Road • Tallahassee, Florida 32303 1-800-543-GATE (4283) • Technical Support 1-800-543-1236 www.gtoaccess.com
INSTALLATION OVERVIEW
-
The SENSOR is designed to detect iron-based metal in motion.
-
The SENSOR’s ability to detect iron-based metal objects is based on the mass, velocity and proximity of the object to the sensor.
EXAMPLE – A child’s bicycle moving at 2 mph @ 1’ from the sensor has a similar effect as a car moving at 2 mph @ 6’ from the sensor. -
The SENSOR must be stationary to function properly.
WIRING THE WAND
-
Obtain the instruction manual for the gate opener.
-
Locate the control terminals (2) that will ONLY OPEN the gate.
-
Verify that the above inputs when shorted (a small wire connecting the 2 terminals) will do all of the following:
• OPEN the gate if the gate is idle.
• STOP and then OPEN the gate if the gate is closing.
• DO NOTHING if the gate is opening.
2 GTO Exit Wand Instructions 12.28.11
TURN GATE OPENER OFF
-
Connect the BLACK to the terminal labeled COMMON , and the BLUE wire to the terminal in STEP 3 to open the gate.
-
Connect the POWER INPUT wires to a power source.
• Connect the YELLOW and BRAIDED GROUND wires to the (–) NEGATIVE side of the power source. (i.e. battery)
• Connect the RED wire to the (+)
The POSITIVE side of power source.
(i.e. battery)
IMPORTANT
WHEN THE WAND IS FIRST POWERED UP IT MUST BE UNDISTURBED FOR 60 SECONDS TO PERFORM THE SELF-TEST AND CALIBRATIONS.
BEFORE POWERING THE WAND MAKE SURE THERE ARE NO MOVING METAL OBJECTS OR MOVING VEHICLES WITHIN THE RANGE OF THE WAND -
Turn opener ON and TEST.
TECHNICAL SPECIFICATIONS:
- Power Supply: 8-26 Vac – 11-30 Vdc
- Current consumption 3 mA. typical
- Relay rating: 1 amp max, 30 Vdc
- Relay Pulse Time: 2 seconds
- Operating Temperature: 25°F (-14°C) to 125°F (-69°C), or battery operating temperature
- Dimensions: 1¾” (44.5 mm) diameter x 16½” (42cm) long
TROUBLESHOOTING:
Make sure all connections are correct
- Disconnect the power (battery) to the WAND.
- Reconnect the power to the WAND and make sure that no metal object or vehicle is moving around the WAND for 60 seconds while it is calibrating.
- Test the WAND to verify that it is working properly.
This product and any accessory you purchase should only be installed on a gate opener that meets the current safety standard, UL325. If you have a gate opener that is not listed with the current standard please contact the GTO sales department for consultation on a gate opener that can meet your specific needs.
Conversion Chart
Converting Metric Units to English Equivalents
When You Know Multiply by To Find Symbol
Centimeters 0.3937 Inches in. (“)
Meters 3.2808 Feet ft. (‘)
Kilograms 2.2046 Pounds lb. (#)
Converting English Units to Metric Equivalents
When You Know Multiply by To Find Symbol
Inches 2.5400 Centimeters cm
Feet 0.3048 Meters m
Pounds 0.4535 Kilograms kg
Converting Temperature
deg. Celsius (0C x 1.8) + 32 deg. Fahrenheit OF
deg. Fahrenheit (0E-32) + 1.8 deg. Celsius OC
GTO LIMITED ONE YEAR WARRANTY
Gates that Open, LLC (GTO), accessories are warranted by the manufacturer
against defects in materials and manufacturer workmanship for a period of one
(1) year from date of purchase, provided the recommended installation
procedures have been followed.
In the case of product failure due to defective material or manufacturer
workmanship within the one (1) year warranty period, the product will be
repaired or replaced (at the manufacturer’s option) at no charge to the
customer, if returned freight prepaid to GTO, 3121 Hartsfield Road,
Tallahassee, Florida, USA 32303. IMPORTANT: Call
800-543-1236 for a Return Goods
Authorization (RGA) number before returning the accessory to the factory.
Products received at the factory without an RGA number will not be accepted.
Replacement or repaired parts are covered by this warranty for the remainder
of the one (1) year warranty period or six (6) months, whichever is greater.
GTO will pay the shipping charges (equal to United Parcel Service GROUND rate)
for return to the owner of items repaired under warranty.
The manufacturer will not be responsible for any charges or damages incurred
in the removal of the defective parts for repair, or for the reinstallation of
those parts after repair. This warranty shall be considered void if damage to
the product(s) was due to improper installation or use, connection to an
improper power source, or if the damage was caused by an electrical power
surge or lightning, wind, fire, flood, insects, or another natural agent.
After the one (1) year warranty period, GTO will make any necessary repairs
for a nominal fee. Call GTO at
800-543-1236 for more information. This
warranty gives you specific legal rights, and you may also have other rights
which may vary from state to state.
This warranty is in lieu of all other warranties, expressed or implied. NOTE:
Verification of the warranty period requires copies of receipts or other proof
of purchase. Please retain these records.
For your nearest dealer, please call 1-800-543-GATE (4283) or visitwww.gtoaccess.com
2 GTO Exit Wand Instructions 12.28.11
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>