FARER Lander Midnight Watch User Manual

June 7, 2024
FARER

FARE- logo

FARER Lander Midnight Watch

featuredFARER-Lander-Midnight-Watch-prodcut

Specifications

  • Model: Farer Explorer Wayfarer, Seafarer, Farfarer
  • Design: British Design. Swiss Made.
  • Movement: Sellita SW330-2
  • Water Resistance: 10ATM / 100M
  • Warranty: 60 months / 5 years

Product Usage Instructions

General Care
Every Farer Automatic watch is designed to withstand the test of time. To ensure its longevity:

  • Avoid excessive exposure to direct sunlight or heat.
  • Avoid violent shocks that may affect the movement.

Cleaning
To clean your watch, follow these steps:

  • Gently wipe the watch case, steel bracelet, or rubber strapwith a slightly damp cloth.
  • Dry and polish using the Farer superfine microfiber cloth.
  • For leather straps, use a specially formulated leather carebalm and avoid getting them wet.
  • Avoid using chemicals for cleaning.

Stainless Steel Crown with Bronze Cap
The bronze cap may patinate and develop a green tone over time. To restore it:

  • Use a pinhead-size blob of metal polish and a fine polishingcloth to gently remove tarnish.
  • We recommend Peek metal polish for best results.

Water Resistance
To maintain water resistance:

  • Rinse thoroughly with fresh water after contact with saltwater.
  • Do not submerge a leather strap in water.
  • After changing date or time, ensure the crown is fully pushedin to position 1.

Servicing & Repairs
Watch straps are guaranteed against manufacturing defects. Leather straps may degrade over time due to perspiration and body oils.

Warranty & Guarantee
Your Farer watch is covered against manufacturing defects for 60 months. To claim the warranty, present the completed warranty card and proof of purchase to the official Farer Service Centre.

British Design. Swiss Made.
Congratulations on your Farer watch purchase. It is designed to be your companion for life’s adventures, inspired by British explorers and crafted with Swiss precision.

WATCH CARE

GENERAL CARE
Every Farer Automatic has been constructed to withstand the test of time. However, like all precision mechanical devices, your watch needs a regular service and proper care. Avoid excessive exposure to direct sunlight or heat. Normal sports activities will not affect the watch’s functionality. However, any type of violent shock may upset the movement and ability to keep correct time.

CLEANING
Watch case, steel bracelet, rubber strap. Gently wipe off the front and back of the watch case, steel bracelet or rubber strap using a clean and slightly damp cloth. Dry and polish your watch with the Farer superfine microfibre cloth. Leather straps. Clean regularly with a specially formulated leather care balm. Avoid getting leather straps wet.

IMPORTANT: Do not use chemicals to clean your watch.

STAINLESS STEEL CROWN WITH BRONZE CAP
The signature Farer bronze cap will patinate as it is exposed to the elements. It may also over time develop a soft green tone depending on the acidity of the wearer’s skin. If you wish to return the bronze cap to its original condition, use a pinhead-size blob of metal polish and a fine polishing cloth to gently remove any tarnish. We recommend Peek metal polish.

WATER RESISTANCE

Your watch case is resistant to 10ATM / 100M and should be rinsed thoroughly in fresh water after being in contact with salt water. Wipe dry with a soft cloth. Your watch case, steel bracelet and rubber strap should be rinsed thoroughly in fresh water after being in contact with salt water. Wipe dry with a soft cloth. Do not submerge a leather strap because the water will damage the natural material.

IMPORTANT : After changing the date or time, please ensure the crown is fully pushed into (home) position 1.

SERVICING & REPAIRS

All parts are manufactured from the best materials. However, some parts are subject to natural wear. This is why we recommend that you have a maintenance service carried out on your watch every 3-4 years. Contact Farer for further information about our servicing programme or use a reputable watch technician who has expertise in Sellita movements. If in doubt about the quality of service needed to uphold your warranty, please contact Farer. Your warranty may be affected if your watch is not properly serviced.

WATCH STRAPS

Watch straps are guaranteed to be free from manufacturing defects at the time of purchase but are not otherwise guaranteed because they are expected to undergo normal wear and tear. Leather watch straps typically have a finite life span, as perspiration and body oils degrade natural leathers over time.

WARRANTY & GUARANTEE

  • Your Farer watch is covered against manufacturing defects for 60 months / 5 years from the date of purchase. Upon presentation of the warranty card duly completed, dated and signed by the authorised Farer dealer, alongside proof of purchase, the right of guarantee will be honoured by the official Farer Service Centre.
  • This warranty excludes the watch case, glass, crown, straps and any damage caused by excessive use or under conditions exceeding water resistance limitations. Please contact Farer to obtain more information.

FARE- Lander-Midnight-Watch-FIG=1

BRITISH DESIGN SWISS MADE

  • Congratulations on purchasing a Farer watch.
  • At Farer, we are passionate about creating watches that are the perfect companions for life’s adventures. Farer watches are inspired by the halcyon era of watchmaking, when bold colours and contrasting textures were combined with the very best craftsmanship.
  • Our watches are named after iconic British explorers, vessels and locations that perfectly define the true spirit of Farer: ambition beyond the ordinary.

Thank you for your support.

  • Here’s to the journey.

SELLITA SW330-2

Swiss Made SELLITA SW330-2 ‘Top Grade’ movement • Hours, minutes, sweep second, 24hr. Stop second device for precision time setting.
Quick date correction • 25 jewels • Self-winding mechanism with ball bearing • Up to 56 hours power reserve

MANUAL WINDING
Your watch has an automatic movement, which means that the motion of your wrist is all your watch needs to function. However, if you have not worn your watch recently, you can give the mechanism a boost either before or after you have set the time. At position 1, wind the crown clockwise 10-20 times to start the movement. This will power the mainspring of your watch. The rotor will continue to wind the watch as you wear it. Fully wound your watch has a power reserve of up to 56 hours.

IMPORTANT: Take care when winding the crown. Do not force the crown to turn as this will permanently damage the mainspring that powers your watch.

SETTING THE TIME
Gently pull out the crown to position 3. Turn the crown until the correct time is displayed. Push the crown back to position 1.

SETTING (GMT) TIME AND DATE
Gently pull out the crown to position 2. Turn the crown clockwise to advance the 24-hour hand or anti-clockwise to advance the date. Push the crown back to position 1.

IMPORTANT: After changing date or time, please ensure crown is fully pushed in to (home) position 1. Only advance the date when the time is after 2AM and before 10PM.

INTERCHANGEABLE STRAPS

  • Our strap mechanism allows you to easily change the look of your watch in seconds, without the aid of a tool. All our straps fit wrists that measure between 16cm to 23cm.
  • To change the strap, pull back the lever to release the pin. Whilst holding back the lever, place pins into lug holes. Once lined up, release lever to secure the strap.

FARE- Lander-Midnight-Watch-FIG=2

Frequently Asked Questions

  • Q: How often should I service my Farer watch?
    • A: Regular servicing is recommended to maintain optimal performance. We suggest servicing every 2-3 years.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals