Explorer Wayfarer Seafarer Farfarer User Manual
- June 8, 2024
- FARER
Table of Contents
- GENERAL CARE
- CLEANING
- STAINLESS STEEL CROWN WITH BRONZE CAP
- WATER RESISTANCE
- SERVICING & REPAIRS
- WATCH STRAPS
- WARRANTY & GUARANTEE
- BRITISH DESIGN. SWISS MADE
- MANUAL WINDING
- SETTING THE TIME
- INTERCHANGEABLE STRAPS
- Customer Support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Explorer Wayfarer Seafarer Farfarer
GENERAL CARE
WATCH CARE
Every Farer Automatic has been constructed to withstand the test of time.
However, like all precision mechanical devices, your watch needs a regular
service and proper care. Avoid excessive exposure to direct sunlight or heat.
Normal sports activities will not affect the watch’s functionality. However,
any type of violent shock may upset the movement and ability to keep correct
time.
CLEANING
Watch case, steel bracelet, rubber strap. Gently wipe off the front and back
of the watch case, steel bracelet or rubber strap using a clean and slightly
damp cloth. Dry and polish your watch with the Farer superfine microfibre
cloth.
Leather straps. Clean regularly with a specially formulated leather care balm.
Avoid getting leather straps wet.
IMPORTANT: Do not use chemicals to clean your watch
STAINLESS STEEL CROWN WITH BRONZE CAP
The signature Farer bronze cap will patinate as it is exposed to the elements. It may also over time develop a soft green tone depending on the acidity of the wearer’s skin. If you wish to return the bronze cap to its original condition, use a pinhead-size blob of metal polish and a fine polishing cloth to gently remove any tarnish. We recommend Peek metal polish.
WATER RESISTANCE
Your watch case is resistant to 10ATM / 100M and should be rinsed thoroughly
in fresh water after being in contact with salt water. Wipe dry with a soft
cloth. Your watch case, steel bracelet and rubber strap should be rinsed
thoroughly in fresh water after being in contact with salt water.
Wipe dry with a soft cloth. Do not submerge a leather strap because the water
will damage the natural material.
IMPORTANT: After changing the time, please ensure crown is fully pushed in to (home) position 1.
SERVICING & REPAIRS
All component parts are manufactured from the best materials. However, some parts are subject to natural wear. This is why we recommend that you have a maintenance service carried out on your watch every 3-4 years. Contact Farer for further information about our servicing programme or use a reputable watch technician who has an expertise in Sellita movements. If in doubt about the quality of service needed to uphold your warranty, please contact Farer. Your warranty may be affected if your watch is not properly serviced.
WATCH STRAPS
Watch straps are guaranteed to be free from manufacturing defects at the time
of purchase but are not otherwise guaranteed because they are expected to
undergo normal wear and tear.
Leather watch straps typically have a finite life span, as perspiration and
body oils degrade natural leathers over time.
WARRANTY & GUARANTEE
Your Farer watch is covered against manufacturing defects for 60 months / 5
years from date of purchase. Upon presentation of the warranty card duly
completed, dated and signed by the authorised Farer dealer, alongside proof of
purchase, the right of guarantee will be honoured by the official Farer
Service Centre.
This warranty excludes the watch case, glass, crown, straps and any damage
caused by excessive use or under conditions exceeding water resistance
limitations. Please contact Farer to obtain more information.
BRITISH DESIGN. SWISS MADE
Congratulations on purchasing a Farer watch.
At Farer, we are passionate about creating watches that are the perfect
companions for life’s adventures. Farer watches are inspired by the halcyon
era of watchmaking, when bold colours and contrasting textures were combined
with the very best craftsmanship.
Our watches are named after iconic British explorers, vessels and locations
that perfectly define the true spirit of Farer:
ambition beyond the ordinary.
Thank you for your support.
Here’s to the journey.
SELLITA SW300-1
MANUAL WINDING
Your watch has an automatic movement, which means that the motion of your
wrist is all your watch needs to function. However, if you have not worn your
watch recently, you can give the mechanism a boost either before or after you
have set the time. At position 1, wind the crown clockwise 10-20 times to
start the movement.
This will power the mainspring of your watch.
The rotor will continue to wind the watch as you wear it. Fully wound your
watch has a power reserve of up to 56 hours.
MPORTANT: Take care when winding the crown. Do not force the crown to turn as this will permanently damage the mainspring that powers your watch.
SETTING THE TIME
Gently pull out the crown to position 2. Turn the crown until the correct time is displayed. Push the crown back to position 1.
INTERCHANGEABLE STRAPS
Our strap mechanism allows you to easily change the look of your watch in
seconds, without the aid of a tool. All our straps fit wrists that measure
between 16cm to 23cm.
To change the strap, pull back the lever to release the pin. Whilst holding
back the lever, place pins into lug holes. Once lined up, release lever to
secure the strap.
Customer Support
(Noun) Explorer Wayfarer, Seafarer, Farfarer
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>