KINIVO 450BNT HDMI Switch with Toslink User Manual

: June 7, 2024
: KINIVO

Table of Contents

Kinivo 450BNT HDMI Switch with Toslink User Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kinivo 450BNT HDMI Switch with Toslink User Manual

Kinivo 450BNT

Kinivo is a trademark of Kinivo LLC. HDMI word mark and the HDMI logo are registered trademarks of HDMI Consortium. All other trade names are registered trademarks of respective manufacturers. This manual may not be copied in any media or form without the written consent of Kinivo LLC.

Kinivo Product Support
Online : http://support.kinivo.com
Email : support@kinivo.com

Thank you for choosing Kinivo. Our user manuals are available in multiple languages at http://downloads.kinivo.com

Thank You

Dear Customer,

Thank you for choosing Kinivo. Our company’s goal is to provide high-quality products and attentive customer service to valued customers like you. We hope to meet and exceed your expectations! Our development team continues to work hard producing high-quality, innovative products that will help you stay on the leading edge. Be sure to look out for our new and exciting product line that can further improve your audio & visual experience.

Yours Sincerely,
Kinivo

Introduction

The Kinivo 450BNT 4K 60Hz HDMI Switch With Toslink enables up to four HDMI source devices (such as the DVD player, cable box, game console etc.) to be connected to a single HDMI input port on your HDTV or projector, while the audio is extracted through Toslink. It can be used to expand the number of HDMI ports on a single input HDMI equipped display with Toslink capability. It is an easy, convenient and inexpensive solution to expand your home theater setup.

Important Safety Instructions

Please read instructions carefully before operation

To prevent risk of electric shock, do not remove cover of the unit. Refer all servicing to qualified service personnel only.
Do not use the device near water.
Clean only with dry cloth.
Do not install or place this unit in a bookcase, builtin cabinet or in any other confined space. Ensure the unit is well ventilated.
To prevent risk of electric shock or fire hazard, do not block the unit’s ventilation openings.
Do not install near any heat sources such as radiators, stoves, heat registers etc.
Unplug during lightning storms or when unused for a long period of time.
Protect power cord from being pinched, particularly near plug points.
Only use attachments/accessories specified by manufacturer.

Warning Alert

Installation

Front Panel Controls

Front Panel Controls

Back Panel Connectors

Back Panel Connectors

Remote Control

Remote Control

Select a specific HDMI Input by choosing 1, 2, 3, or 4.
Cycle the HDMI Inputs using the “Select” .
Pressing the “Auto Switching” turns the Auto Switching on or off.
Pressing the “ARC” turns the ARC “on” or “off”

Note:

The remote control uses infrared light signal and requires direct line-of-sight to the IR Remote Sensor. Please make sure that the IR Remote Sensor is not blocked.
Please remove screw before opening the battery bay to replace the remote’s battery.

Setup

Connect the output port of the HDMI Switch to HDTV or Projector using a HDMI cable (Note: HDMI cable is not included).
Connect Devices (Game Console, DVD Player, Streaming Media Player, etc) to the input ports on the HDMI Switch.
Repeat the above step to connect your Cable Box, DVD Player, Streaming Media Player, etc.
Connect a Toslink cable to the Toslink Port of HDMI Switch and the other end to the Sound System.
Plug the included power adapter to the HDMI Switch and connect it to a AC power outlet.

Connection Diagram

LED Indicators

LED Indicators

LED Indicators Continued

Operation

HDMI Input Indicators

The 450BNT Switch has four HDMI Input indicator lights on its front panel. When an HDMI Input is selected for use, the corresponding HDMI Input Indicator is illuminated in Blue.

Input Selection with the Front Panel Button

To select an HDMI input, press the ‘SWITCH’ button on the front panel of the HDMI Switch. Each press of the button progresses to the next connected HDMI Input. Signal from the selected HDMI Input is sent to the Output port and its corresponding HDMI Input Indicator is illuminated in Blue.

Input Selection with the Remote Control

There are also direct input selection buttons on the remote control (Buttons 1, 2, 3, & 4). Pressing each button selects the corresponding HDMI Input port, no matter whether the port has active input signal or not.

ARC

Enable or Disable ARC

To enable or disable ARC, press the “ARC/Auto Switching” button on the front panel of the Switch. The ARC LED will turn Blue when enabled.

Note: ARC is enabled by default.

Auto Switching

Automatic Input Selection

When the 450BNT Switch is powered on for the first time, it senses input ports automatically and switches to the input port source automatically in the sequence 1 › 2 › 3 › 4. It bypasses input ports without signal. When a new device is turned on, the Switch automatically selects that input. For example, if cable box is powered on, the HDMI Switch will automatically switch to the cable box. Turn the currently selected device off and the Switch automatically selects the next higher numbered input that has an active signal (1 › 2 › 3 › 4…)

While Auto Switching is a convenient feature, it will not work with every HDMI input device, unfortunately, because some cable TV boxes, streaming devices, game consoles, and similar devices don’t ever really turn off their HDMI signal, even when they appear to be turned off or asleep. These devices transmit a blank HDMI signal or black screen to the TV through our switch, even when asleep or turned off.

Here is a list of popular devices that do not support Auto Switching:

Amazon Fire TV
Apple TV (all generations)
Roku
Xbox One, Xbox One S, Xbox One X

Enable or Disable Auto Switching

To enable or disable Auto Switching, press and hold the “ARC/Auto Switching” button on the front panel of the Switch for 8 seconds. The Auto Switching LED will turn Blue when enabled.

Note: Auto Switching is enabled by default.

Specifications

Frequently Asked Questions (FAQ)

What do I do if I have a HDCP error?
HDCP errors are usually caused by syncing/ handshake issues..
- Simply unplug all your devices from the Switch.
- Unplug the Switch from the power source.
- Replug all your devices and restart the entire set up again. This should help resolve the issue.
What do I do if my switch is not working or there is no audio?
Steps to diagnose the device:
- Ensure all HDMI cables are completely inserted into the Switch. Loss of connection can cause issues.
- Make sure that the HDMI cables are working. Try a different HDMI cable to check if cable is the issue.
- Ensure input devices are powered on.
- Test with just one input device to diagnose. Check if the input device works directly with the TV. This will also help verify the HDMI cable. Try pressing the input number on the remote corresponding to where the input is connected.
What do I do if Auto Switching is not working as advertised?
Refer to “Auto Switching” section.
What do I do if ARC is not working as advertised?
Refer to “ARC” section.

FCC Statement

This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

One or more of the following measures

Reorient or relocate the receiving antenna.

Move the equipment away from the receiver.

Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ television technician for additional suggestions. You are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation. If the time arises to throw away your product, please recycle all the components possible. Batteries and rechargeable batteries are not to be disposed in your domestic waste! Please recycle them at your local recycling point. Together we can help to protect the environment.

Warranty

2 Year Limited Hardware Warranty

Kinivo hereby warrants to the customer of record that this product is in good- working condition and free from defects in material or workmanship under normal use for a duration of 2 years after the date of purchase. The product has been tested to meet the highest quality standards in each testing category. In the unlikely event that the product proves to be defective, Kinivo will repair or replace the product free of charge. If replacement is required and if Kinivo then no longer carries the same product, then Kinivo reserves the right to substitute the product with a replacement product of like quality and size, suitable for the intended use.

This warranty is limited to repair or replacement of the mentioned product only, is non-transferable and does not extend to any product damaged by misuse, natural disasters or any other circumstances beyond Kinivo’s control. The warranty does not cover or provide for the reimbursement or payment of incidental or consequential damage resulting from breach of the limited warranty described above we offer no other warranties expressed or implied, and other than limited warranty expressly contained herein, we hereby disclaim any and all warranties, including without limitation any implied warranties of merchantability, suitability or fitness for a particular purpose.

If your product is not functioning or you have any concerns please contact Kinivo Support before returning the product.

Online Support / Contact Us

Please visit us at support.kinivo.com or www.kinivo.com for support information, downloads and how-to’s. You may also reach us via email or live chat (details below).

Kinivo Product Support
US Toll Free Number: 1-855-454-6486
Email : support@kinivo.com
Live chat : http://support.kinivo.com

Designed in USA.
Assembled in China.