SHARPER IMAGE 186-Piece Vanadium Tool Set User Guide

: June 7, 2024
: Sharper Image

Table of Contents

SHARPER IMAGE 186-Piece Vanadium Tool Set User Guide
CONTENTS
- Tray 1:
- Tray 2:
- Tray 3:
- Tray 4:
OPERATING THE ELECTRIC GLUE GUN
SAFETY CAUTIONS
WARRANTY / CUSTOMER SERVICE
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SHARPER IMAGE 186-Piece Vanadium Tool Set User Guide

a computer sitting on top of a table

Thank you for purchasing the Sharper Image 186-Piece Vanadium Tool Set. This collection is ideal for beginners and experts, whether you already have tools or need an extra set.
Please note: All tools are metric size, unless otherwise specified

11X screwdrivers (PH3*150,
PH175, PH2100, PH238, PH075, PH1*100mm,
SL6100mm, SL575mm,
SL375mm, SL638mm,
SL4*100mm)
3X insulation screwdrivers
1X electrical tester (100V-500V)
1X ratchet bit holder (160mm)
1X pressure tester (140mm)
24X 25mm bits
9X hex keys (1.5, 2, 2.5, 3,
4, 5, 6, 8, 10mm)
1X 58mm extension bar
6X precision screwdrivers
(SL1.4-1.8-2.3-3.0,PH0-PH1)

Tray 3:

2X nylon spring clamps (3”)
1X 10” aluminum level (with three water bubbles)
1X knife (155mm)
1X 12 oz. claw hammer
1X 8” kitchen scissor
1X electric hot glue gun 10W/110V-240V 50/60Hz
2X glue sticks (100m)
1X measuring tape (5m)
1X 8” wire stripping plier
1X roll of insulation tape (6m) 60X fasteners (various nails, screws etc. in plastic case)

Tray 4:

15X 1/4” sockets (4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 9, 10, 11, 12, 13, 14mm)
1X 1/4” extension bar (4”)
1X 1/4” extension bar
1X 1/4” extension bar (2”)
1X 1/4” ratchet wrench (165mm)
14X 1/2” sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 30mm)
1X 1/2” extension bar (5”)
2X 1/2” spark plug sockets
(16mm & 21mm)
2X universal joints (1/2” & 1/4”)
1X 1/2” extension bar
1X 1/2” ratchet wrench (10”)
1X socket holder (155mm)
1X flexible pipe (145mm) Also Included:
1X wheeled aluminum carrying case

OPERATING THE ELECTRIC GLUE GUN

Attach the wire stand to tool. Snap open ends of stand into holes near nose of tool. Use this stand when setting down the hot tool. This allows for good ventilation. Do not lay the hot tool down on its side.
Plug the power cord into a standard AC outlet. Use an extension cord if needed.
Insert glue stick into rear opening of tool.
Allow tool to heat 3-5 minutes before using.
Squeeze trigger to apply glue. Note: The amount of glue released depends on how far you squeeze the trigger.
Unplug the tool when you are finished, or if you will not use it within two hours.
Do not remove the glue stick from the tool. This may damage the tool. The melted glue inside the tool will cool, and can be stored this way. The glue will melt again the next time you plug in the tool.
Allow tool to cool for at least 15 minutes before storing. WARNING: Do not touch melted glue or the hot tool nozzle. The temperature of the nozzle reaches 350°F (193°C). Severe burns will occur.

SAFETY CAUTIONS

WARNING: Follow all safety precautions outlined in these instructions. Improper use of this tool can cause evere injury from fire, electrical shock or burns.

Read and understand all instructions before using this tool.

This tool is not a toy. Keep out of reach of children at all times.
Do not touch the hot nozzle. Severe burns will occur.
Do not touch the melted glue. Severe burns will occur.
Do not operate the tool…
1. Where highly flammable liquids or gases are present.
2. If tool is exposed to rain or in damp or wet areas.
3. If the tool is damaged.
Do not glue things above your head. The hot glue may drip on you.
Wear safety glasses whenever using this tool.
Stay alert. Use common sense when using this tool.
Unplug the tool when not in use.
Use the wire stand when setting down the hot tool. Do not lay the hot tool on its side.
not apply petroleum based wood stains to glue joints. The bonding power of the glue can break down.
Do not glue items that will be exposed to temperatures of over 140°F.
Do not alter this tool in any way.
Maintain this tool with care.
Keep the tool clean, dry and free of oil and grease.
Inspect the power cord often.
Never carry this tool by the power cord.
Never yank the power cord to unplug the tool.
Keep power cord away from heat, oil and sharp edges.
Never oil or grease any part of this tool.
Always store tool and glue sticks out of children’s reach.
Always store tool and glue sticks in a high, locked location that is dry.
This glue is not intended for heavy objects or as a replacement for structural fasteners.
Hot glue is not resistant to flammable liquids.
Do not use this glue to repair fuel tanks.
Do not attempt to repair this tool. There are no user-serviceable parts.

WARRANTY / CUSTOMER SERVICE

Sharper Image branded items purchased from SharperImage.com include a 1-year limited replacement warranty. If you have any questions not covered in this guide, please call our
Customer Service department at 1 877-210-3449. Customer Service agents are available Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.