STARKLINE Electric Netting Kit User Manual

ELECTRIC NETTING
KIT
User Manual

https://flowto.it/eFain3xR

Everything You’ll Need

Check to make sure you have all of the following components

*Note: your netting, energizer and/or ground rod may not look identical to the ones pictured above.

Not Included
Though it is not included, we recomend purchasing a U-post or T-post to attach your energizer to in order to keep it off of the ground.

BeforeSettingUpYourNetting

A. Clear The Fence Line

• Clear the anticipated fence line of tall grass, weeds, brush, or other obstructions

Debris making contact with the netting will lower conductivity and overall effectiveness
B. Remove Strings From The Netting

• Open up your Starkline electric netting kit and make sure you have all of the components. See page 1 for reference.
• Remove the strings tied around the netting and posts
  

SettingUpYourNetting

A. Lay Out The Posts
While holding the posts, walk backwards and lay out one post at a time; unfold the entire roll of netting.
Drop each post in the proper sequence along the anticipated fence line.

B. Insert Posts Into The Ground & Tie Ends Together
Step each of the posts into the ground
For best results, connect the two ends of the netting by tieing the “pigtails” at the end of the first and last post together

SupportYourNetting

Fasten Ropes To The Corner Posts

Thread the rope through the groove at the top of each corner post and tie it on securely. B. Stake Each Of The Ropes Into The Ground

• Tie the ends of each rope to the stakes, pull each line tight, and drive each stake into the ground.
• This prevents your netting from sagging/drooping which could hinder its performance, not to mention look unattractive.
  

Energizer&GroundRod

A. Drive Ground Rod Into The Earth

• Insert the ground rod into the soil within a 20 foot radius of your energizer
  

• Try to get the ground rod into the ground as far as you can without obstructing the area where the clips will go
  

B. Attach Energizer

Attach the energizer to the fence by clamping the positive jumper clip to the metal clips from part 2-B.
Attach the negative jumper clip to your ground rod.
*For more detailed instructions on how to opperate & attach your specific energizer, please consult your energizer’s user manual.

Finished!

Congratulations! Your Starkline Electric Netting Kit is now fully operational and ready to keep your crops or livestock safe and sound.
If you would like to see a video version of these instructions or find out more about electric netting in general, please visit Starklinenet.com or scan the QR code below.

https://flowto.it/eFain3xR

Netting Repair Kit

One of the wires in your netting snapped or broken? No worries! All

Stakline electric netting kits come with one double-sided Litzclip to make repairs fast and easy!
How It Works

*Note: For safety reasons, the fence should NOT have electricity flowing through it while being worked on

Dismantling/Moving the Netting

WARNING: This step is very important! Improperly folding or rolling the netting may result in serious tangling.
After disconnecting the energizer, walk along the fence and retrieve each post one at a time. As the posts are collected, hold them together and allow the netting to fold itself in half
Lay the folded net on the ground and roll TOWARDS the posts. Using the tie ropes, tightly tie the roll into a bundle similar to how it was when it came out of the box. DO NOT roll the posts into the netting.

Helpful Tips & Other Info

Displaying A Warning Sign
If any part of your electric netting is installed along with public property, it must be identified at infrequent intervals by warning signs securely fastened to the fence posts or wires. The sign must be at least 4″ x 8″, must have a yellow background on both sides, and contain a variation of the words “Caution: Electric Fence”

Using Netting To Contain Horned Animals
Horned animals have a higher risk of becoming entangled in the netting and should be observed during the training period- that is until they have interacted with the fence and received a pulse- so they learn not to interact with the fence.

Avoid “Continuous Current” Fence Energizers
Due to possible fire hazard, do NOT use a “continuous current” energizer with any electric fence products. Instead, Use only low-impedance intermittent pulse energizers. All Starkline energizers use an intermittent pulse and are suitable for use with electric netting and other e-fence products.

Hang Netting To Store
Storing netting on the ground could make it easy for rodents to chew through the rolls causing severe damage to the net. Store the netting far away from anywhere rodents might be- hanging the roll up off of the ground is a good solution.

References

• Starkline Electric Netting – Starklinenet.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>