Cambridge Audio TV Speaker Base With Bluetooth User Guide
- June 7, 2024
- Cambridge Audio
Table of Contents
Cambridge Audio TV Speaker Base With Bluetooth User Guide
Placement
TV2 is designed to be placed under your TV. The TV must have a base no wider than 550mm (21.5”) and no deeper than 300mm (12”) and must weigh no more than 30kg (66lbs). If the TV base is too large to fit, place TV2 on a lower shelf of your TV rack.
TV Connections
Only one audio connection to your TV is required, in order of preference:
- Optical: If available on your TV, use this for best quality.
- RCA: Connect both left and right channels to your TV.
- AUX 3.5mm: Connect to the headphone output of your TV.
Note: If the 3.5mm socket is used it takes priority over the RCA input which will be muted.
Learning your TV remote
Remove the fabric grille and locate the control panel. Follow the instructions remembering to point your TV remote at the control panel whilst learning.
To talk to us, call +44 (0)203 514 1521 (UK Local)
or 1-877-357-8204 (USA)
Bluetooth set-up
TV2 is equipped with Bluetooth to allow wireless playback from any Bluetooth equipped phone, tablet or computer.
Once paired, music from your device will play through the unit. To add another Bluetooth device, repeat from step 2. TV2 will store up to 8 paired devices in memory.
TOP TIPS
Auto power down
To save power, TV2 will automatically turn off after a few seconds if no sound is playing from your TV.
Auto Power On
When you turn on your TV, TV2 will detect the sound and automatically turn on.
Sound Modes There are 4 different modes that can be selected to enhance
your sound experience.
TV: Greatly improved TV sound
Music: Enhances stereo music and music videos.
Film: Designed to get the best sound from movies.
Voice: Enhances voices to improve intelligibility.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>