FENTON MDJ10 Party Station Instruction Manual

June 7, 2024
FENTON

FENTON MDJ10 Party Station - LOGO

Ref. nr.: 178.306

FENTON MDJ10 Party Station -

INSTRUCTION MANUAL

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to
benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.

– Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
– The unit contains voltage carrying parts. Therefore do NOT open the housing.
– Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
– Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
– The unit is not suitable for continuous use.
– Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
– When unplugging the unit from a mains outlet, always pull the plug, never the lead.
– Do not plug or unplug the unit with wet hands.
– If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
– If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
– To avoid fire and shock hazards, do not expose the unit to rain and moisture.
– All repairs should be carried out by a qualified technician only.
– Connect the unit to an earthed mains outlet (220240Vac/50Hz) protected by a 10-16A fuse.
– During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
– If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you witch it on. Never use the unit in humid rooms or outdoors.
– To prevent accidents in companies, you must follow the application guidelines and follow the instructions.
– Do not repeatedly switch the fixture on and off. This shortens the lifetime.
– Keep the unit out of the reach of children. Do not leave the unit unattended.
– Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
– Do not force the controls.
– This unit is with speaker inside which can cause a magnetic field. Keep this unit at least 60cm away from the computer or TV.
– If this unit has a built-in lead-acid rechargeable battery.
Please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.
– If the battery is damaged please replace it with the same specifications battery. And dispose of the damaged battery environment friendly.
– If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
– Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
– Keep away from electronic equipment that may cause interference.
– Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
– Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
– Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
– The mains voltage is 220-240Vac/50Hz. Check if the power outlet matches. If you travel, make sure that the mains voltage of the country is suitable for this unit.
– Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalidate your warranty. Do not make any changes to the unit. This would also invalidate your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Fenton cannot be held responsible for personal injuries caused by the disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain the packing material for inspection if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

CONTROL ELEMENTS

  1. Microphone Volume control
    Turn to adjust the microphone volume.

  2. Equalizer / Microphone Priority
    Press shortly to adjust the equalizer or press longer for selecting the microphone.

  3. Previous / Channel –
    Press button shortly to select the previous song or press longer for selecting the previous channel.

  4. Play / Record
    Press button shortly to play the song or press longer to start recording.

  5. Next / Channel +
    Press button shortly to select the next song or press longer for selecting the next channel.

  6. Input / Record Play
    Press button shortly to select input (USB/SD/LINE IN) or press longer to start play the recording.

  7. Master Volume
    This knob controls the “master” (output level) of the soundbox.

  8. USB Input
    Connect your USB devices to this slot to play music with MP3 format.

  9. SD/MMC Input
    Connect your SD/MMC devices to this slot to play music with MP3 format.

  10. Microphone Input 1
    6.3mm (1/4”) jack for connecting microphone.

  11. Treble control
    Adjust high tone control of the microphone.

  12. Bass control
    Adjust low tone control of the microphone.

  13. Echo Control
    Adjust the echo effect of the microphone.

  14. Microphone Input 2
    6.3mm (1/4”) jack for connecting the second microphone.
    FENTON MDJ10 Party Station - CONTROL ELEMENTS

  15. Line input
    RCA jack in- and output for connecting audio units with line-level output (e.g. mixer, CD player, tape recorder).

  16. ON/OFF Switch

  17. Power Input
    Connect the delivered power cable into this connector. Caution! Voltage range AC 100-240Volt.

CONNECTING WITH BT-DEVICE

1. Activate the BT function on your device (Mobile phone, tablet etc.) which you want to play the
music. See the operating instructions for that device.
2. Press the “MODE” button and activate BT-function of soundbox.
3. Select “MDJ110” on your BT device and make the BT-connection

If password is required, you can enter “0000”.

Attention: The BT distance is approx. 10 meters without any barrier.

TECHNICAL SPECIFICATION

Power supply: 100~240VAC 50/60Hz
Power max.: 120Watt
Woofer: 6.5”
Speaker: 2x 3”
Impedance: 4Ω (woofer) + 8Ω (tweeter)
Frequency response : 55-20kHz
Dimensions: 305x370x230mm
Weight: 4.8kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

FENTON MDJ10 Party Station - tronios

Declaration of Conformity

Manufacturer: TRONIOS BV
Bedrijvenpark Twente 415
7602 KM – ALMELO
+31(0)546589299
+31(0)546589298
The Netherlands

Product number:  178.306
Product Description: MDJ110 Party Station
Trade Name: FENTON
Regulatory Requirement: EN 60065:2014
62479:2010
300328 V1.8.1:2012
301489-1 V1.9.2:2011
301489-17 V2.2.1:2012

I hereby declare that the product meets the requirements stated in Directives 2014/35/EU an2014/30/EU and conforms to the above-mentioned Declarations.

Almelo,
06-02-2017

Name : M. Velders
Signature :

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals