Babymore drop side cot / bed Instructions
- June 7, 2024
- Babymore
Table of Contents
Babymore drop side cot / bed
Troubleshooting steps for Drop side issues of Babymore cot beds
Thank you for purchase Babymore drop side cot / bed. Not often, after assemble our cot bed delivered flat packed, few customers may find the drop side function are not smooth as expect. We have complied below troubleshooting steps for issue found with the drop side of your cot bed.
Read the instructions for safe use that come with your cot.
Make sure you follow the assembly instructions step by step. To prevent
assembly errors, we’ve produced an assembly video for most of our drop side
cot beds available on Babymore website and YouTube. If you could not find a
video for your specific cot bed, check the video below. Although it’s a
different cot bed, it has the same drop side mechanism across a range of our
drop side cots.
Operate the drop side as per below mentioned:
- Ensure the “Push” label is facing outward as the drop side rail must be installed the right way around.
- Metal pins attached on cot end/cot legs, which connect to drop side panel, please check are inserted correctly as indicated in the instructions.
- Do not over tighten the metal pins as unwanted friction would impair the free movement of mechanism, making it difficult to operate the drop side.
- Do not attempt to close the even gap between drop side rail and cot end, which allow the drop side rail to slide. Over tighten connection bolts will impair the drop side function and damage wooden element of the cot.
- If a stabilizer bar supplied with your cot, make sure it is installed behind or under the drop side rail.
- If a bottom bar supplied with your cot, make sure it is installed beneath the cot, and under the side of drop side rail.
- Make sure the floor has a level and even surface. A tilted cot structure would impair the function of drop side, and difficult to operate.