TMby Aqara Hub M2 User Guide

Aqara Hub M2
User Guide Aqara Hub M2 Quick Start Guide

Product Introduction

Aqara Hub M2 is a smart home control center. It can be connected with WiFi or Ethernet network, and support interaction and connection with Zigbee accessories. Besides, it has an IR remote control function, which can add and manage the control of different IR devices. Aqara Hub M2 allows you to more conveniently control plug, bulb, curtain, air conditioner, fan, etc.

• This product is only for indoor use.

Quick Setup

1. Download the app Search for “Aqara Home” on the app store or scan the QR code. Download and install the Aqara Home app.

http://cnbj2.fds.api.xiaomi.com/lumi-app/aiot-h5/aqara-home/developing.html
2. Set up the Hub

1. Choose the installation location of the Hub: the Hub should be 2-6 meters away from the router in the house, and avoid metal blocks between the Hub and the router or around the Hub.

2. Power the Hub on: please use the 5V-1A or 5V-2A adapter (you need to prepare it separately) and the USB power cable to power the Hub on. * If you need to use wired network communication between the Hub and the router, please use a network cable with RJ45 network port to connect the LAN ports of the Hub and your router, and wait for the orange and green lights on the side of the network port to light up.

3. Wait for the yellow Hub indicator light to change from being always-on to flashing.

4. Make sure that the mobile phone is connected with the 2.4GHz Wi-Fi network.

• If you use a dual-band router, please make sure your phone is connected with 2.4GHz Wi-Fi or disable 5GHz Wi-Fi.
• Keep your phone close to the Hub and make sure both of them are connected with the same Wi-Fi network. 5. Please open the Aqara Home app, click “+” in the upper right corner, select “Hub M2” and follow the instructions to complete adding the Hub.
• For iOS users, if you want to realize Apple HomeKit control, please scan or manually enter the HomeKit Setup Code (please save it properly) on the bottom of the Hub or on the manual according to the app instructions during the Hub adding process, and bind the Hub to HomeKit. After it is bound successfully, you can view the added Hub in Apple Home app. 6. If you fail to add the Hub, please press the button on the Hub for more than 10 seconds until the yellow light flashes quickly, and then add it again. If you need some help, please contact www.aqara.com/support.

3. Device Operations

1. Add a accessory: after the Hub is successfully added, please refer to the accessory installation guide to add a accessory.
2. Control IR home appliances: please configure the brands and models of the IR home appliances you need to control in the app according to the app guidelines, and then perform the corresponding app control and automation control.

4. Restore to Factory Settings
Quick press the button on the hub ten times.

Indicator Light Description

connection; Flashing appears after the first use or within fifteen minutes after the reset
Blue| Flashing| Wi-Fi is connecting; app is connecting to the Hub; the network is down; the Hub is reconnecting to the network after it is powered off and on
Always-on| Working normally
White| Flashing| Wi-Fi is connecting; the Hub is connecting to the network.
Always-on| The Hub enters the network connection failure status; only after you power the hub on/off or reset the hub, it can enter the status to wait for the network connection
Purple| Flashing| The Hub is allowed to add accessories

• Due to the update of the app, the actual operation may be slightly different from the above description. Please follow the instructions in the current app or operate the device according the actual device status.

Specifications

• Model: HM2-G01
• Dimensions:100.5×30.75mm(3.95×1.21 in.)
• Input Power: 5V1A or 5V2A
• Wireless Protocol: Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Zigbee3.0 IEEE 802.15.4, BLE 5.0
• Operating Temperature: -5°C~+50°C(23°F~122°F)
• Operating Humidity: 0%-95%RH, no condensation
• Support System: Android 6.0 or iOS 12.0 and above
• Wi-Fi Operation Frequency: 2412-2472 MHz
• Wi-Fi Maximum Output Power < 20 dBm
• Bluetooth Operation Frequency: 2402-2480
• MHz Bluetooth Maximum Output Power < 13 dBm Zigbee
• Operation Frequency: 2405-2480 MHz Zigbee
• Maximum Output Power < 13 dBm

Notice
Communication between iPhone, iPad, Apple Watch, HomePod, or Mac and the HomeKitenabled Aqara Hub M2 is secured by HomeKit technology.
A customer who owns an Apple TV (4th generation or later) with tvOS 10 or later, an iPad with iOS 10 or later, or a HomePod can control HomeKit-enabled accessories away from home and automatically through triggers such as time of day, location, sensor detection, or the action of an accessory.
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
FCC ID: 2AKIT-HM2-G01
Federal Communications Commission (FCC) compliance statement:
1.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

2.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o- and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter
IC: 22635-HM2G01
IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This Class B digital apparatus complies with Canadian ICES003. (2)This device complies with RSS247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
This device may not cause interference.This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
**** Hereby, [Lumi United Technology Co., Ltd.] declares that the radio equipment type [Hub M2, HM2-G01] is in compliance with Directive2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lumiunited.com/DoC/
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by [Lumi United Technology Co., Ltd.] is under license. Other trademarks and trade names are those of their respective owners. Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.

Warnings

1. This product is NOT a toy. Please keep children away from this product.
2. This product is designed for indoor use only. Do NOT use in humid environments or outdoors.
3. Beware of moisture, do NOT spill water or other liquids onto the product.
4. Do NOT place this product near a heat source. Do NOT place it in an enclosure unless there is normal ventilation.
5. Do NOT attempt to repair this product by yourself. All repairs should be performed by an authorized professional.
6. This product is only suitable for improving the entertainment, convenience of your home life and reminding you about the device status. It should NOT be used as security equipment for home, building, warehouse or any other places.If a user violates the product use instructions, the manufacturer will NOT be liable for any risks and property losses.

Online Customer Service: www.aqara.com/support
Email: support@aqara.com
Manufacturer: Lumi United Technology Co., Ltd
Address: 8th Floor, JinQi Wisdom Valley, No.1
Tangling Road, Liuxian Ave, Taoyuan
Residential District, Nanshan District, Shenzhen, China.
Lumi United Technology Co., Ltd.
8th Floor, JinQi Wisdom Valley, No.1
Tangling Road, Liuxian Ave, Taoyuan Residential
District, Nanshan District,,
https://tm.by
– TM.by

References

• Aqara Smart Device Product Support
• Aqara Smart Device Product Support
• Declaration of Conformity - Aqara

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>