ANKER PowerSolar 3-Port 24W User Manual

: June 7, 2024
: Anker

Table of Contents

At a Glance
Using Your PowerSolar
Note
Specifications
Important Safety Instructions
Notice
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER PowerSolar 3-Port 24W User Manual

At a Glance

Stand
Charging panel
LED indicator

Using Your PowerSolar

Unfold PowerSolar. Make sure it is fully opened before use
Use the stand: Support your PowerSolar with a stand. Place in direct sunlight so that PowerSolar can absorb sufficient sunlight.
Charge your phone, tablet or PowerHouse using a USB cable. If PowerSolar is working correctly, the LED indicator will light blue.

LED Indicator Guide

LED Indicator	Status Description
Solid blue	Working correctly
Solid red	Over Temperature / Overcurrent / Short Circuit Prompt Note: When

this happens, stop using PowerSolar until it recovers.
Off| No output or insufficient solar output

Note

PowerSolar can’t store electricity directly. You will need a power bank or PowerHouse to store power or connect PowerSolar directly to your devices to charge.
Charging efficiency is subject to sunlight intensity.
Keep your phones and tablets away from direct sunlight. Excessive heat may cause damage.
24W refers to the power of the solar panel, which is not equal to the actual output power of the USB ports. As there will be some power loss when solar energy is transferred into electrical energy, the actual output power of the USB ports will be less than the power of the solar panel.
When PowerSolar is in a shaded area, there is a chance that the LED indicator will turn off due to insufficient power input. PowerSolar will resume its current function automatically when placed in direct sunlight.

Specifications

Power	24W
USB A Output	5V 2.4A (Max Per Port)
Size(unfolded)	705 × 340 × 3.5 mm / 27.8 × 13.4 × 0.14 in
Size(folded)	200 × 340 × 34 mm / 7.9 × 13.4 × 1.34 in
Weight	1221g / 43 oz

Important Safety Instructions

Avoid dropping
Do not disassemble.
For the safest and fastest charge, use original or certified cables
Open flame sources, such as candles, must not be placed near this product.
Only use a dry cloth or brush to clean this product.

Notice

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject t the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The following importer is the responsible party.

Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: (+1-800-988-7973)

IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2424 is in compliance with Directive 2014/30 /EU. The full text of the EU declaration of conformity is available at the following internet address http://www.anker.com

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, HongKong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3-5, 80807 Munich, Germany

Please note : that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.