arlo Video Doorbell User Guide
- June 7, 2024
- Arlo
Table of Contents
Set up your Arlo Video Doorbell
The Arlo Video Doorbell requires a wired doorbell and chime with a voltage
between 16 – 24VAC and a 10VA transformer.
If a new transformer is required, we recommend that you have it installed by a
certified electrician.
1. Download the Arlo app and follow the setup instructions for your Arlo Video Doorbell.
2. Install the Power Kit.
3. Replace your
existing doorbell with your Arlo Video Doorbell.
WARNING : To prevent fire and injury, connect the Arlo Video Doorbell and Power Kit only to a voltage between 16 – 24VAC.
What’s in the box
Tools
• A Phillips screwdriver is required to install the doorbell (not provided).
• You might also benefit from having a drill, a level, and a ladder (to reach
the chime).
Need help?
We are here for you.
Visit www.arlo.com/support for quick answers
and resources:
• How-to videos
• Troubleshooting tips
• The Arlo Support phone number for your location
© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are
trademarks of Arlo Technologies, Inc. Other trademarks are for reference
purposes.
(If this product is sold in Canada, you can access this document in Canadian
French at arlo.com/docs.)
For regulatory compliance information including the EU Declaration of
Conformity, visit
www.arlo.com/about/regulatory/.
Arlo Technologies Intl. Ltd.
Ground Floor, Building 3
University Technology Center
Curraheen Road, Cork, T12 EF21
Ireland
Arlo Technologies, Inc.
2200 Faraday Avenue, Suite 150
Carlsbad, CA 92008 USA
February 2020
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>