Swann Wire-Free Security Camera User Guide

Swann Wire-Free Security Camera

CAMERA OVERVIEW

CHARGE THE CAMERA

Before using the camera for the first time, charge it for at least two hours with the included USB charging cable.

1. Open the rubber cover of the micro USB port at the back of the camera.
2. Insert the smaller end of the USB charging cable into the micro USB port on the camera, and the larger end into a USB wall charger such as the USB power adapter that came with your phone.
3. The LED indicator on the front of the camera turns solid blue indicating that the camera is charging. When the camera is fully charged, the LED indicator will turn off.
4. Actual charging times may vary depending on the USB power supply (DC5V 2.1A or above is recommended for faster charging) and the remaining battery level. A full charge can take up to six hours if the camera’s battery is low.

GET THE SWANN SECURITY APP

1. Download the latest version of the Swann Security app from the Apple App Store® or Google Play™ Store on your iOS or Android device. Simply search for “Swann Security”.
2. Open the app and create your Swann Security account. You will need to activate your account by confirming the email sent to the registered email account.

SET UP THE CAMERA

Launch the Swann Security app and sign in. Tap the Pair Device button on the screen (or open Menu and select Pair Device) and follow the in-app instructions to set up your new camera. Before you begin, be close to your router or access point and have your Wi-Fi network information (including password) handy. Please note that the camera can connect to a 2.4GHz Wi-Fi network only.

CAMERA PLACEMENT

The camera can be conveniently placed on a table or shelf, or mounted on the wall using the magnetic stand or the outdoor stand (optional accessory which can be purchased separately). Because the camera is completely wire-free, you’ll have a lot of flexibility on where you can put it. Choose a location with good, reliable Wi-Fi reception to ensure best video streaming performance. As a general rule, the nearer your camera is to your router, the better the wireless connection quality.

Mounting the magnetic stand

TIPS

Motion detection

The camera’s PIR motion sensor detects heat signatures of moving objects. You’ll generally get good detection results by pointing the camera downwards at an angle where people will be moving across the coverage area before heading directly towards the camera.

LED indicator guide

The LED light on the front of your camera helps inform you of what is happening with the device.

Have questions?

We’re here to help! Visit our Support Center at support.swann.com. You can register your product for dedicated technical support, find answers to commonly asked questions, and more. You can also email us at any time via: tech@swann.com

FCC Statement

This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.
WARNING: Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
Frequency Range: 2.4GHz ISM Band
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance.
This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

CE marking on this product represents the product is in compliance with all directives that are applicable to it. See www.swann.com/uk/compliance. This product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment safe recycling.

References

• EU Full Declaration of Conformity UK

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>