CASFUY Pet Nail Grinder User Manual
- June 7, 2024
- CASFUY
Table of Contents
CASFUY Pet Nail Grinder User Manual
Before using please read the manual carefully and keep it properly for reference
Product Diagram and Advantages Description
- Added lighting to make it easier and cleaner for pet nails trimming.
- Upgrade strong motor: powerful motor ,greatly improved power, lower noise ,less vibration ,longer service life.
- Designed for large pets: 2 speed-swith can be adjusted, small and large pets are universal.
- USB portable charging: adapt to Android charging head/power bank or computer USB interface.
- Innovation hand rope and protective cover design: more convenient and safer.
The protection cover can be placed from the front end to the rear end when used
Product Specification
| Product Specification | Pet Nail Grinder |
|---|---|
| Charger | Input:AC100-240V 50/60Hz |
Output:DC5V 1000mA
Battery type| Li-ion 18650 3.7V 1500mAH
Charging time| 3h
Using time| 11h
2 Speed using| 7000-8000/RPM
Charging Method
- Insert the charging plug into the slot of the pet nail grinder.
- Insert the USB plug into the USB charger(mobile phone charger).
- Confirm to insert the charger into the outlet when the nail grinding machine is in the OFF state.
- The green indicator light flashes in the charging state. After charging ,it continuously lights up, rather than flash.
Method of Application
-
Please select an appropriate port according to the pet’s nail characteristics.
-
When grinding the nail,please gently put the pet’s nail into the nail grinding hole. The grinding time shall not be longer than
-
seconds each time.
-
If the nail grinder is used for the pet for the first time,it is suggested to grind the sharp or long nail of the pet first.Please note not to grind too much and make the pet adapt to the pet nail grinder.
- Please clean the impurities on the nail grinding wheel surface when the nail grinding effects are reduced.
Cleaning
-
Rotate the protective cover of the nail grinding wheel anticlockwise and take it down.
-
Start the nail grinding machine to make the nail grinding wheel rotate.
-
Gently touch the rotating nail grinding wheel with an eraser or a piece of cloth to remove the nail powder left on the grinding wheel surface
Cautions
-
Do not tear down the product at random.
-
Do not clean product by water flush ,and keep the unit away from damp situation.
-
Do not use any corrosives such as alcohol,gasoline and etc. to clean the surface.
-
Avoid being charged above 40℃ or below 0℃.
- If the product is not used for a long time,please charge it once at least every three months.
- Product becoming hot during use or charging is normal.
Disposal of Battery
The inside is rechargeable battery.Please take the battery out before discarding it and dispose the battery in an environment-friendly way.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>