CASFUY F13-L Automatic Pet Feeder Instruction Manual

CASFUY F13-L Automatic Pet Feeder

Product Information

Specifications :

• Model: F13-L
• Power: 5V/1~2A
• Components: Top Lid, Food Bowl, Ice Packs, Display Panel, Hexagonal Bracket, Control Board, Base Unit, Type-C USB Cable (No Adapter)

Safety Guide

Device Placement:

1. The pet feeder should be positioned on a level surface. Do not place or store the appliance where it could fall or be pulled.
2. This product is intended for indoor household use only and should be kept away from direct sunlight and wet areas.

Important Safety Information:

1. This product is intended for use with cats and small dogs only.
2. Keep small children from playing with, in, or around the pet feeder.
3. The filling in the ice pack is not edible. If it becomes damaged, do not use it.
4. Avoid submerging the control board in water. The device should never be submerged, as this may damage electronic components.
5. Do not disassemble the pet feeder, except for its components.
6. Never place or store the appliance in a tub or sink.
7. Please prevent the charging port from getting wet. If it becomes wet, make sure it is completely dry before charging.
8. The feeder is only compatible with a 5V/1~2A adapter for charging.
9. Always unplug the feeder when not in use. If the device is stored for over 6 months, ensure it is fully charged.
10. Do not allow pets to chew on or swallow any parts.
11. Use the pet feeder only for its intended purpose, which is feeding pets.

Components:

• Top Lid
• Food Bowl
• Ice Packs
• Display Panel
• Hexagonal Bracket
• Control Board
• Base Unit
• Type-C USB Cable (No Adapter)

Product Usage Instructions

Set Up the Pet Feeder

Unlock the Panel
Press and hold both the lock/unlock buttons simultaneously to unlock the buttons.

Set Current Time

1. Press the time setting indicator button to enter the setting mode; the icon will light up and flash.
2. Press the decrease value button (-) or increase value button (+) to set the current hour, then press the save button and proceed to the minutes setting.
3. Press the decrease value button (-) or increase value button (+) to set the minutes, then press the save button. The current time setting is complete.

Note:

• This feeder operates on a 12-hour format.
• If there is inactivity for 20 seconds, the feeder will automatically save and exit the setting.

Set the Meal Times

Set the time for the first meal
After setting the current time, the feeder will enter the feeding plan setting mode. The icon will flash, indicating that it’s ready for configuring the first meal.

1. Press the decrease value button (-) or increase value button (+) to set the hour, then press the save button and proceed to the minutes setting.
2. Press the decrease value button (-) or increase value button (+) to set the minutes, then press the save button. The first meal time setting is complete.

FAQ:

1. Q: Can I use this pet feeder outdoors?
   A: No, this product is intended for indoor household use only and should be kept away from direct sunlight and wet areas.

2. Q: Can I use this pet feeder for larger dogs?
   A: No, this product is intended for use with cats and small dogs only.

3. Q: Can I use any adapter for charging?
   A: No, the feeder is only compatible with a 5V/1~2A adapter for charging.

Automatic Pet Feeder

Model：F13-L

• Please read the manual carefully before using this product.
• If you encounter any issues or need further assistance, please don’t hesitate to contact After-Sales for support. [email protected] @casfuy

Safety Guide

Device placement

1. The pet feeder should be positioned on a level surface. Do not place or store the appliance where it could fall or be pulled.
2. This product is intended for indoor household use only and should be kept away from direct sunlight and wet areas.
3. Avoid placing the feeder in temperatures below 0°C.
4. Never insert foreign objects into the pet feeder.
5. Ensure there are no objects on or around the food bowl to prevent pets from eating properly.

Important Safety Information

1. This product is intended for use with cats and small dogs only.
2. Keep small children from playing with, in, or around the pet feeder.
3. The filling in the ice pack is not edible. If it becomes damaged, do not use it.
4. Avoid submerging the control board in water. The device should never be submerged, as this may damage electronic components.
5. Do not disassemble the pet feeder, except for its components.
6. Never place or store the appliance in a tub or sink.
7. Please prevent the charging port from getting wet. If it becomes wet, make sure it is completely dry before charging.
8. The feeder is only compatible with a 5V/1~2A adapter for charging.
9. Always unplug the feeder when not in use. If the device is stored for over 6 months, ensure it is fully charged.
10. Do not allow pets to chew on or swallow any parts.
11. Use the pet feeder only for its intended purpose, which is feeding pets.

Components

LED display

Set Up the Pet Feeder

Unlock the Panel
Press and hold both the and  buttons simultaneously to unlock the buttons.

Set Current Time

1. Press the button to enter the setting mode; the  icon will light up and flash.
2. Press the or button to set the current hour, then press the button to save and proceed to the minutes setting.
3. Press the or  button to set the minutes, then press the button to save. The current time setting is complete.

*Note:

1. This feeder operates on a 12-hour format.
2. If there is inactivity for 20 seconds, the feeder will automatically save and exit the setting.

Set the Meal Times

Set the time for the first meal
After setting the current time, the feeder will enter the feeding plan setting mode.

The 1 icon will flash, indicating that it’s ready for configuring the first meal.

1. Press the or button to set the hour, then press the button to save and proceed to the minutes setting.
2. Press the or button to set the minutes, then press the button to save. The  first meal time is now set, and the meal 2 icon will begin flashing.

Set the times for the other meals
The feeder supports up to 5 scheduled meals per day. Simply repeat the steps above to set the rest according to your pet’s needs.

*Note:

1. The feeder does not dispense food at 12:00AM.
2. If your pet doesn’t require 5 scheduled meals per day, simply long-press the button to exit after setting the minutes for any of the 5 plans.
3. Since it has a memory function, it can repeat your scheduled plans. The feeder only  shows one if you duplicate feeding plans, the other(s) will be automatically reset to 12:00am.
4. The feeder only displays incomplete feeding plans per day. The meal number icon will disappear once that plan is complete, and light up the next day.

Manually Feed Your Pet
While in the unlocked status, press and hold the ****button. The feeder will rotate one slot and dispense a meal.

Cancel a Meal
When you want to cancel one of these settings, set it to”AM12:00”, then the feeder  won’t feed.

Clear All Settings
While in the unlocked status, simultaneously press and hold the ****and buttons until the machine emits a single ‘beep,’ indicating that all meal settings have been cleared.

Charge the Feeder

• This feeder doesn’t include a charging adapter, please ensure using a 5V/1~2A  adapter/outlet for charging.
  • The icon flashes when the device is in low charge.
  • The icon is on while charging and turns off after being fully charged. 

Prepare the Feeder

• Remove the Lid
  Lay the feeder flat, use one hand to pull up the ring lock, and with the other hand, lift the top lid from the opposite opening.

• Place the Ice Packs
  Take out the ice packs and lay them flat in the freezer at a temperature of -18°C . Allow them to freeze for at least 6 hours before using.

*Note：

1. Ensure that you lay the ice packs flat in the freezer to prevent bulging, which can make them difficult to place under the tray.
2. The ice packs have an effect for 6-8 hours and can keep your cat’s wet food cold for up to 24 hours.
3. If you plan to be away for longer than 24 hours, please arrange someone to replace the ice packs and refill the wet food.
4. Please be aware that the effectiveness of the ice packs in preserving freshness may be influenced by environmental conditions.

Fill up Pet Food

1. Align the food bowl with the control board properly. The food bowl rotates clockwise; fill it with pet food accordingly.
2. Before locking the cover, ensure it is sealed completely.

*Note:

1. The opening cannot be programmed with a time. The slot to the right is for the first  programmed time.
2. Avoid overfilling the tray to prevent spills that may damage the control board.

Cleaning & Maintenance

• The top lid and the food tray are removable and can be washed.
• The main board is not waterproof and should not be washed since it contains electronic components. Please keep it away from water.
• Clean the base by wiping it with a soft, damp cloth.

*Note：

1. After feeding fresh or canned food, it is recommended to wash the food bowl daily.
2. The food tray and the top lid are designed to withstand temperatures ranging from -20°C to 70°C. Exposure to high temperatures may cause material deformation.

FAQ

installed properly
Device Abnormality| Contact after-sales
E1:– Display| Food bowl is stuck by foreign objects| Clean the foreign matter on the food bowl and feed it manually once
Too much food in the food bowl| Fill the food bowl with the appropriate size and amount of food
E4:– Display| Photoelectric sensor error| Contact after-sales
Device Abnormality| Contact after-sales
E5:LP Display| Low battery| Charge asap

Parameters

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>