YAMAY Smart Watch Instructions
- June 7, 2024
- YAMAY
Table of Contents
YAMAY Smart Watch Instructions
YAMAY Smart Watch Instructions
Please read the instructions carefully and keep it safe.
Bind Watch
1.Download and install App
You can set up the watch through the “VeryFitPro” app for iOS Android devices.
The steps are shown as follows:
Notes: The hardware platform of the equipment system shall meet
requirements.I. Bind Watch
Correct operation: Scan the QRcode below or download VeryFitPro APP through the mobile APP store to pair with the watch.
http://www.youduoyun.net/qrcode.html
The wrong operation: Pair the watch directly with the Bluetooth in your mobile phone’s settings.
2. Bind process
-
Turn on the Bluetooth and GPS on your mobile phone
-
Bind Device
-
Select product model: ID205U
-
Click “Ok” to complete binding.
Notes:
①.During the binding process, VeryFitPro will prompt you to enable GPS and
Bluetooth, and authorize VeryFitPro to get access to the GPS on your mobile
phone.
②. Apple phones need to click “pair”, the watch has a variety of message
reminders .
3.Synchronous data
In daily wear, the watch can detect all kinds of product data. The user needs
to connect the watch with Bluetooth on the APP before synchronous operation.
The detailed operations are shown as follows:
Open the mobile APP> swipe down the page> sync prompt appears
Notes!
Please synchronize the data at least once within 7 days to avoid data loss at
the watch end.
Instruction for Use
-
Charging schematic
Buckle the watch into the charger seat as shown in the picture. It needs to be charged to activate the watch when it is started for the first time. Make sure the metal contacts of the watch and of the Charging dock match well, then the watch can be charged properly. -
Wear/install
|
---|---
Wear the wristband one finger away from the wrist bone and adjust the
tightness of the wristband to a comfortable position.| Flip the switch and
take out the wristband
①. Wear
Wear the wristband one finger away from the wrist bone and adjust the
tightness of the wristband to a comfortable position.
② .Replace the strap
Switch
Flip the switch and take out the wristband
Tip: Wearing too loosely may affect the accuracy of heart rate data.
Operating Instructions
-
Definition of key function
-
Watch dial switch
Replacing the dial interface will appear after long-press the dial. -
Main interface operation Swipe the screen to enter differently interfaces (interactive interface tile diagram)
①. Notice: Display notification message content.
②.Status:
| | |
---|---|---|---
Heart rate Detection| Wrist sense| Do not disturb mode| Looking for a mobile
phone.
③.Data bar:
④.Function list interface:See below for Function Introduction。
4.Dial data view (default dial)。
Long press the screen to switch different data
Function Introduction
- Icon function introduction
| | |
---|---|---|---
Enter the window of the sports, and choose different sports modes. Change the
sports mode on the
APP| Perform a heart rate test to check your heart rate data for the day.|
Help you regulate your breathing and
relax your mood.| View, turn off, or urn on the alarm clock. You need to
add an alarm clock on the mobile APP.
| |
---|---|---
Control music play on your mobile phone (watch cannot store music)| Have the
timing and countdown function.| Record recent sports.
①.Enter the window of the sports, and choose different sports modes.
Change the sports mode on the APP
-
Start sports
Click the sports icon > select the sports type > enter the sports countdown automatically -
During sports
Pause sports: short press the right key
Restore sports: short press the right key -
End sports
End sports: long-press the right key> select the end button on the screen
②.Perform a heart rate test to check your heart rate data for the day.
③.Help you
regulate your breathing and relax your mood.
④.View, turn off or turn on the alarm clock. You need to add an z alarm clock
on the mobile APP.
⑤.Control music play on your mobile phone (watch cannot store music)
⑥.Have the timing and countdown function.
⑦.Record recent sports
⑧. settings
2. Sleep detection: The watch automatically detects sleep all day, please
wear a good watch when using it;
Notes: For more functions and operations, please check the VeryFitPro software
of the mobile phone.
Product Parameters
Model | ID205U | Screen type | 1.3-inch color screen |
---|---|---|---|
Battery capacity | 210mAh | Charging voltage | 5V±0.2V |
Charging time | about 2.5 hours | Battery life | over 7days |
Waterproof level | IP68 | Weight of product | 38g |
Operating Temperature | -20°C—40°C | Bluetooth version | BLE 4.2 |
Product frequency | 2402-2480MHz | Max. transmission power consumption | 0.75dBm |
Battery life: Actual battery life and charging time will vary depending on
usage and environment, etc.
Waterproof: Not suitable for diving, swimming in the sea, or sauna. But
suitable for swimming in swimming pool or in the shower (cold water) and
shallow beach.
Cleaning and Maintenance
It is recommended to wear and maintain according to the
following three points:
- Keep the product clean;
- Keep the product dry;
- Do not wear it too tight.
Do not use household cleaners to clean the watch, but use soap-free detergent.
It is recommended to use alcohol to scrub stains that are not easy to remove.
Frequently Asked Questions
-
Mobile APP search for the watch failed
(1)It is recommended to update VeryFitPlus to the latest version.
(2)It is recommended to close all programs, restart the Bluetooth, and then connect
(3)Confirm whether the mobile phone system meets Android 4.4 or IOS 8.0 or above. -
The watch received no alerts, text messages or phone calls
(1)You need to turn on the smart reminder function and the call reminder switch in the APP and synchronize to the watch.
(2)The iPhone needs to be paired with the watch via Bluetooth.
(Please check the column of “Synchronous Data” for details)
(3)You need to keep your watch connected to Bluetooth. -
Bluetooth is often disconnected
(1)If the distance between the watch and the mobile phone is too far, the connection effect of more than 7m Bluetooth is obviously weakened.
(2)Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc., will interfere with the Bluetooth connection signal.
(3)Whether the Bluetooth function of the mobile phone is abnormal. -
About data backup
The data of the watch is synchronized at least once every 7 days to the mobile phone (the watch end only keeps the data of the last 7 days). -
How to restart and restore factory settings
Shutdown operation: Watch > set > shutdown/right-key restart Restore factory settings: connect watch to APP > open APP > device model > more settings -
Do I need to keep my Bluetooth on when I wear my watch?
(1)For the three functions, i.e. counting steps, sleeping, and alarm clock, you do not need to connect the watch to the mobile phone all the time. If you only need to wear a watch when you exercise, you can connect the watch and your mobile phone to view the data synchronously after the exercise.
(2)For the functions of call alert, message alert, find the phone, you need to turn on the mobile phone’s Bluetooth, and maintain the connection with the mobile phone.
More detailed questions can be answered with help and feedback in the APP.
Operation steps:VeryFitPro > > help and feedback Matters Needing Attention
①.Watch data needs to be kept once every 7 days to avoid data loss.
②.The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquids. The damage or defects caused by misuse or improper use are not covered by the warranty.
③.Sports mode supports up to 6 hours of exercise at a time.
④.The watch has a waterproof level of IP68 and supports a cold water shower, swimming, but not diving.
⑤.Avoid wearing the watch too tight in daily use. Please keep the parts of the watch touching the skin dry.
⑥.When your heart rate is measured, keep your arm still during the test.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion. Leaving a battery in an
extremely high temperature surrounding environment can result in an explosion
or the leakage of flammable liquid or gas. battery subjected to the extremely
low air pressure that may result in an explosion or the leakage of flammable
liquid or gas.
FAQS
Is Yamay smartwatch accurate?
Accurate Fitness Tracker Watch – YAMAY watch will accurately track your all-day steps,calories consumption,distance traveled,heart rate.It also supports extra 7 sports modes to help you track your other exercise patterns,and will connect to smartphone’s GPS to draw the route map in the related app.
Does Yamay smart watch take blood pressure?
This watch can track your heart rate, blood pressure and blood oxygen in a very convenient way, which making it to be a very good health assistant for you.
Can you answer calls on Yamay smart watch?
The device has a speaker and microphone that allow you to answer calls made to your smartphone.
Are Yamay watches any good?
The Yamay Fitness Tracker Watch has great performance. It comes with many excellent features like a heart rate monitor, sleep monitor, and stopwatch. It can also count your steps, calories, speed, and distance if you want to treat it as a fitness tracker or hiking watch
Which Yamay Watch tracks blood pressure?
[Heart Rate & Blood Pressure & Blood Oxygen Monitor]- YAMAY 023 can accurately monitor this three body’s most critical indicator of health. You can read them real-time directly on the watch.
Are blood pressure watches any good?
Blood pressure monitor watches may provide accurate readings, although this hasn’t been proven in large-scale studies. To get the most accurate, consistent results, it may make sense to choose a watch designed specifically for this purpose, rather than a fitness tracker that includes this feature.
Is there a smart watch that monitors blood pressure?
It has an all-day heart rate and blood pressure monitor, too, so you can review your health data and see your progress over time. Extra features include a sedentary alarm, sleep quality assessment, and women’s health tracking.
How accurate is a smart watch blood pressure?
Is smartwatch blood pressure accurate? The Bodimetrics performance monitoring and the reference had an average difference of 5.3 (4.7) mm Hg for SBP. Conclusions: Both the Everlast smartwatches and the BodiMetrics performance monitor we tested were not accurate enough for use as BP measurement devices.
Is there a watch that monitors blood sugar and blood pressure?
The Active 2 also has many watch faces that display this data for you to choose from. Another feature that diabetes patients may find useful is its blood pressure detector, though you’ll have to ensure your watch has up-to- date software.
Is wrist or arm blood pressure more accurate?
Blood pressure readings tend to skew higher when measured with wrist monitors. In fact, the American Heart Association (AHA) advises against wrist blood measures for home monitoring. According to the AHA, home monitors that are used on the upper arm are generally more accurate.
Can a smartwatch measure cholesterol?
Blood pressure readings tend to skew higher when measured with wrist monitors. In fact, the American Heart Association (AHA) advises against wrist blood measures for home monitoring. According to the AHA, home monitors that are used on the upper arm are generally more accurate.
Do any watches check blood sugar?
K’Watch Glucose is a CGM (Continuous Glucose Monitor) device that will track your glucose level continuously throughout the day and night. Check your sugar levels discreetly by simply glancing at the watch.
Why is my first BP reading always high?
Your first blood pressure reading will almost always be higher than the second due to a wide range of factors, both environmental and psychological. These factors include white coat syndrome, stress, and having a full bladder.
Can smartwatches cause heart problems?
The study showed that technologies like smartwatches and other wrist-worn devices may heighten awareness and attention to normal and abnormal fluctuations in heart rates , which may lead to substantial increases in anxiety in patients and prompt unnecessary medical care.
Can an Apple Watch measure blood sugar?
An Apple Watch owner has created a complication and watchOS app that works with a glucose monitor , so they can keep track of their blood glucose level from their wrist.
Can you check blood sugar without pricking finger?
If you’re looking for a blood sugar monitor without finger pricks, a noninvasive CGM can also measure your glucose. Depending on the type of meter you choose, you may have to wear a sensor on different areas of the body and switch it out after a certain amount of time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>