BLUSTREAM HEX70CS-KIT HDBaseT Extender Set User Guide

: June 14, 2024
: BLUSTREAM

Table of Contents

BLUSTREAM HEX70CS-KIT HDBaseT Extender Set
Product Information
Product Usage Instructions
Introduction
Panel Description HEX70CS-RX
Specifications
Package Contents
Maintenance
Certifications
EDID Control
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLUSTREAM HEX70CS-KIT HDBaseT Extender Set

BLUSTREAM-HEX70CS-KIT-HDBaseT-Extender-Set-product

Product Information

The HEX70CS-KIT HDMI 2.0 4K 60Hz 4:4:4 (18Gbps) HDCP 2.2 HDBaseTTM extender set offers market leading features and outstanding value utilising CSC technology. The product extends HDMI, bi-directional IR & RS-232, and bi- directional PoC (Power over Cable) up to lengths of 70m (4K to 40m). The Transmitter includes a HDMI loop-out for integrating local displays or cascading onto multiple devices. The Receiver features simultaneous analogue stereo and digital optical (S/PDIF) audio breakout.

Features

HDMI 2.0 4K 60Hz 4:4:4 (18Gbps) HDCP 2.2 compliant
Extends HDMI, bi-directional IR & RS-232, and bi-directional PoC up to 70m (4K up to 40m)
Transmitter with HDMI loop-out
Simultaneous analogue stereo and digital optical audio breakout

Specifications

Model	HEX70CS-TX	HEX70CS-RX
Input	HDMI, IR, RS-232	HDBaseTTM, IR, RS-232
Output	HDBaseTTM	HDMI, IR, RS-232
Audio Output	Analog stereo, digital optical (S/PDIF) audio breakout	Analog

stereo, digital optical (S/PDIF) audio breakout
Power| DC 12V/2A| DC 12V/2A

Product Usage Instructions

Panel Description – HEX70CS-RX

Mode dip-switch – to switch RS-232 serial port between pass-through and firmware update mode
RS-232 / serial connector
HDBaseTTM input
HDBaseTTM signal link indicator
DC 12V/2A screw type connector
Power status indicator
IR switch – toggle between 5V and 12V IR
Optical digital output – de-embedded from HDMI input
Analogue audio left / right output (3.5mm stereo jack) – de-embedded from HDMI input. Supports stereo 2ch PCM audio only
HDMI signal link indicator
HDMI Output
IR IN (from Blustream 5V 3.5mm IR receiver)
IR OUT (to Blustream 5V 3.5mm IR emitter)

Panel Description – HEX70CS-TX

IR switch – toggle between 5V and 12V IR
EDID DIP switch (UP = 0, DOWN = 1)
IR OUT (to Blustream 5V 3.5mm IR emitter)
IR IN (from Blustream 5V 3.5mm IR receiver)
RS-232 / Serial connector
USB Upgrade port – For future use
HDBaseTTM output
Power status indicator
DC 12V/2A screw type connector
HDMI input – connect to source device
HDMI input link indicator
HDMI loop output – connect to display / sink device
HDMI loop output link indicator

FAQ

Q: How far can the HEX70CS-KIT extend HDMI signals?
A: The HEX70CS-KIT can extend HDMI signals up to a maximum length of 70m for 1080p resolution and up to 40m for 4K resolution.
Q: Can I connect multiple devices to the Transmitter using the HDMI loop-out feature?
A: Yes, you can cascade multiple devices by connecting the HDMI loop output of the Transmitter to the next device’s HDMI input.
Q: What audio formats are supported by the HEX70CS-KIT?
A: The HEX70CS-KIT supports stereo 2ch PCM audio only.
Q: Can I clean the unit with alcohol or paint thinner?
A: No, it is recommended to clean the unit with a soft, dry cloth. Do not use alcohol, paint thinner, or benzene as they may damage the unit.
Q: Is the product FCC compliant?
A: Yes, the product complies with FCC regulations for Class B digital devices.

Introduction

Our HEX70CS-KIT HDMI 2.0 4K 60Hz 4:4:4 (18Gbps) HDCP 2.2 HDBaseT™ extender set offers market leading features and outstanding value utilising CSC technology. The product extends HDMI, bi-directional IR & RS-232, and bi-directional PoC (Power over Cable) up to lengths of 70m (4K to 40m). The Transmitter includes a HDMI loop-out for integrating local displays or cascading onto multiple devices. The Receiver features simultaneous analogue stereo and digital optical (S/PDIF) audio breakout $BLUSTREAM-HEX70CS-KIT-HDBaseT-Extender-Set- fig- $1$$

FEATURES:

Advanced HDBaseT™ technology offering distribution of video and audio over a single CAT cable
Advanced Colour Space Conversion (CSC) supports HDMI 2.0 18Gbps specification including HDR support
Supports 4K 60Hz 4:4:4 UHD video up to 40m
Extends HDMI 1080p video up to 70m
Features 1 x HDMI loop-out on HEX70CS-TX for integrating local displays or cascading to multiple devices
Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
Supports all known HDMI audio formats including Dolby TrueHD, Atmos and DTS-HD Master Audio transmission
HDMI re-clocking on the HDBaseT™ Receiver to help solve HDMI HDCP, compatibility and handshaking issues
HDMI audio breakout to analogue L/R audio and optical (S/PDIF) digital outputs concurrently
Supports bi-directional RS-232 pass through
Supports bi-directional IR pass through
Supplied with Blustream 5V IR receiver and emitter
Advanced EDID management
HDCP 2.2 support

Panel Description HEX70CS-RX

Mode dip-switch – to switch RS-232 serial port between pass-through and firmware update mode
RS-232 / serial connector
HDBaseT™ input
HDBaseT™ signal link indicator
DC 12V/2A screw type connector
Power status indicator
Optical digital output – de-embedded from HDMI input
Analogue audio left / right output (3.5mm stereo jack) de-embedded from HDMI input. Supports stereo 2ch PCM audio only
HDMI signal link indicator
HDMI Output
IR IN (from Blustream 5V 3.5mm IR receiver)
IR OUT (to Blustream 5V 3.5mm IR emitter)

Panel Description HEX70CS-TX

IR switch – toggle between 5V and 12V IR
EDID DIP switch (UP = 0, DOWN = 1)
IR OUT (to Blustream 5V 3.5mm IR emitter)
IR IN (from Blustream 5V 3.5mm IR receiver)
RS-232 / Serial connector
USB Upgrade port – For future use
HDBaseT™ output
Power status indicator
DC 12V/2A screw type connector
HDMI input – connect to source device
HDMI input link indicator
HDMI loop output – connect to display / sink device
HDMI loop output link indicator

Specifications

HEX70CS-TX

Video Input: 1 x HDMI Type A, female
Video Output: 1 x HDBaseT™ RJ45 connector 1 x HDMI Type A, female
RS-232 Serial Port: 1 x DB9 female connector
IR Input: 1 x 3.5mm stereo jack
IR Output: 1 x 3.5mm mono jack
EDID DIP Switch: 4-pin
Mounting Kit: Included
Dimensions excl. Connections (W x D x H): 143mm x 134mm x 22mm
Shipping Weight (Kit): 0.5 kg
Power: 12V/2A DC, screw type connector
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: -4°F to 140°F (-20°C to 60°C)

NOTE : Specifications are subject to change without notice. Weights and dimensions are approximate

HEX70CS-RX

Video Input: 1 x HDBaseT™ RJ45 connector
Video Output: 1 x HDMI Type A, female
Audio Output: 1 x 3.5mm L/R analogue audio 1 x Optical digital (S/PDIF)
RS-232 Serial Port: 1 x DB9 female connector
IR Input: 1 x 3.5mm stereo jack
IR Output: 1 x 3.5mm mono jack
Mounting Kit: Included
Dimensions excl. Connections (W x D x H): 113mm x 124mm x 22mm
Shipping Weight (Kit): 0.4 kg
Power: 12V/2A DC, screw type connector
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: -4°F to 140°F (-20°C to 60°C)

Package Contents

HEX70CS-KIT

1 x HEX70CS-TX and 1 x HEX70CS-RX
1 x 12V/2A DC Power Supply
1 x IR Emitter (IRE1)
1 x IR Receiver (IRR)
2 x Mounting Kits
1 x Quick Reference Guide

For the full HEX70CS-KIT Rev2 User Manual please visit the Blustream website

HEX70CS-RX (when sold individually)

1 x HEX70CS-RX
1 x Mounting Kit

HEX70CS-TX (when sold individually)

1 x HEX70CS-TX
1 x Mounting Kit

Maintenance

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.

Certifications

FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION – changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling

Understanding the Transmitter / Receiver Status Lights

EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by the source to find out what audio and video resolutions are supported by the display. By pre-determining the video resolution and audio format of the source and display device you can reduce the time needed for EDID hand shaking thus making switching quicker and more reliable.
Configuration of extender EDID settings can be achieved using the product dip-switches on the HEX70CS-TX. EDID dip-switch settings are shown below.

EDID Control
The Blustream HEX70CS-KIT extender solutions include status LED indicators on both the Transmitter and Receiver products to show all connections are active and to help diagnose possible problems.

Receiver:

The HDMI signal link light will be off when there is no connection with a display / sink
The HDMI link light will be on when there is an active connection with a display
The HDBaseT™ link light will be off when there is no CAT cable / active HDBaseT™ connection on the RJ45 HDBaseT™ input
The HDBaseT™ link light will blink if there is an unstable connection between the Transmitter and Receiver
The HDBaseT™ link light will be lit when a CAT cable is connected to the HDBaseT™ RJ45 output on the Transmitter and an active connection is achieved with the Receiver

Transmitter:

The Input HDMI signal link light will be off when there is no connection with a source device
The Output HDMI signal link light will be off when there is no connection with a display / sink
The Input HDMI link light will be on when there is an active connection with a source device
The Output HDMI link light will be on when there is an active connection with a display / sink
The HDBaseT™ link light will be off when there is no CAT cable / active HDBaseT™ connection on the RJ45 HDBaseT™ output
The HDBaseT™ link light will blink if there is an unstable connection between the Transmitter and Receiver
The HDBaseT™ link light will be lit when a CAT cable is connected to the HDBaseT™ RJ45 output on the Transmitter and an active connection is achieved with the Receiver / Matrix

EDID Control

EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by the source to find out what audio and video resolutions are supported by the display. By pre- determining the video resolution and audio format of the source and display device you can reduce the time needed for EDID handshaking thus making switching quicker and more reliable. Configuration of extender EDID settings can be achieved using the product dip-switches on the HEX70CS-TX. EDID dip- switch settings are shown below.

Global EDID Settings