YAMAY SW022 Round Dial Smart Watch User Manual

SW022 Smart Watch Manual

01 Wear the watch for a distance of about one finger from the wrist and adjust the tightness of the wrist strap to a comfortable position.
Tip : Wearing too loose may affect the heart rate sensor’s data collection.

Pairing

1. Press and hold the watch to operate ， use the mobile phone to scan the QR code on the watch screen, download and install the APP. You can also scan the QR code below to download and install it in the mobile application market.
   http://api.start.king-wear.top/mobile/sports-yamei-apk-download

2. Open Run to Sport, select (add device) on the device page, and follow the on-screen instructions.

|
---|---

Tips

1. During the pairing, please confirm that the Bluetooth of the mobile phone is turned on to ensure the normal connection between the watch and the mobile phone.
2. If the device cannot be found, or the device cannot be connected, try to press and hold the power button of the watch for 3 seconds, select to reset in the operation interface, and then add the device again.

Instruction

a. the home page of the dial slides top from the bottom to open the control panel

b. the home page of the dial slides bottom from the top to open the message

c. Slide from left to right to open the main menu

d. Long press the watch face interface for 3 seconds to change watch faces

e. long press power key for 3 seconds to power on/power off

f. click the power key to pause and continue the status of the sport

g. Click the power key and go back to watch face interface h.click and go back to the last menu.

04 function

| 13 sports modes (running, walking, cycling, mountaineering, yoga, skipping, tennis, baseball, basketball, table tennis, badminton, football, rugby)
---|---
| Heart rate: 24H real-time heart rate monitoring throughout the day, you can view historical heart rate data
| Status: Detailed records of daily steps, step distance, calories
| Sleep: Record sleep time and sleep status in detail
| Stopwatch: timing
| Sync information: Information reminder, sync notification push on a mobile phone.
| Settings: Shutdown/Restore/About/APP Download

05 Slide from right to left accordingly to quick interface

| Status: Detailed records of daily steps, step distance, calories
---|---
| Heart rate: 24H real-time heart rate monitoring throughout the
day, you can view historical heart rate data
| Sleep: Record sleep time and sleep status in detail
| 13 sports modes (running, walking, cycling, mountaineering, yoga, skipping, tennis, baseball, basketball, table tennis, badminton, football, rugby)
| Music: can Remote control the music on the phone

Charging

1.  Place the watch on the charger to make sure the charging contacts and the metal contacts are completely fit.
2. Connect the charging cable to a standard USB charger , with an output voltage of 5V and an output current of 0.5A and above. If the watch cannot be turned on after being left for a long time, wipe the charging contacts of the charging cable clean when using it again to avoid sweat or moisture residue.

 basic parameter

Standby >30days
Using time: 5days (all modes on )
Side button| Power key
Charging way| Magnetic
Waterproof| IP68
Motor| Support

After-sale service

l. 1. When the product is in normal use, if there are product quality problems caused by manufacturing, materials, design, and other reasons, the motherboard will be free of charge within one year from the date of purchase, and the battery and charger will be guaranteed for six months.
2. For the failure caused by the user’s personal reasons, a free warranty is not provided,
as follows:

1. Failure caused by unauthorized disassembly and reassembly of watches.
   2). Failure caused by accidental drop during use.
   3). All man-made damage or misuse due to the third party (such as the host enters the water, the external force cracks, Damage of scratches on peripheral parts, etc.) is not covered by the warranty.
   3. When requesting a free warranty, please provide a  warranty card with the date of purchase and the stamp of the place of purchase.
   4. When the user repairs the product, please take the product to our company or our distribution stores.
   5. All the functions of the product are mainly based on the real product.

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>