Applications Wireless USB Adapter Installation Guide

Table of Contents

Applications Wireless USB Adapter

Windows: XP,Vista,Win7,Win8,Win8.1,Win10
MacOS: MacOS（10.6～10.13）

Note:

This wifi adapter is CD driver free for Windows and Mac OS.
If you are using the adapter on a desktop, please plug the adapter into the USB interface on the motherboard.
If you are using the adapter on a laptop, please disable the built-in wireless card first.
Some of the win7/8/10 computers come with older Realtek NIC driver, which is not compatible with the new driver of this adapter. The driver disk may not be recognized by your computer. In this case, please follow the below steps to fix the problem: Open “Control Panel” — “Uninstall a program”— “WifiAutoInstallSrv version”—Uninstall—Restart the computer.
AP mode is supported only for Windows System. To active AP function, please install the wifi driver first, and then download the software driver via the following link and install it.
http://ozlcrwml4.bkt.clouddn.com/RTL- 600M&1200M_V1.4.zip
The driver disk will disappear when the driver is installed. Please copy the driver file to your computer as backup before installation. For Mac OS, you will need the backup file for driver uninstallation. Please refer to Chater 2.
If the driver has been installed on a computer, only when you uninstall the driver, unplug and plug the adapter, the driver disk can be found again on your computer.

Plug the adapter into the computer, click “Computer”, you will find a disk named “REALTEK”.
Double Click “REALTEK”and click“Windows”to open the file.
Double click “Wifi Auto Install Setup” to run the installation.
Click the Network icon on your computer and select “Connect to a network”
Select your wireless network and input WiFi Key to connect to your WiFi network.
Network is successfully connected.

Plug the adapter into the computer, click “Computer”, you will find a disk named “REALTEK”.
Double Click “REALTEK” and click “MacOS”
Double click “WifiAutoInstallSetup.pkg” to run installation.
Enter User Name and Password and click “Install”.
When the installation is finished, you will find a WiFi Installation Icon on your Mac. Please Unplug the adapter first and plug it again into the computer.
Double click the WiFi Installation icon and select your wireless network to connect.

FIG 16 Installation Guide for MAC

Go to “Control Panel”—“Programs”—“Uninstall a program”—“WifiAutoInstallSrv version” — uninstall

FIG 17 Driver Uninstallation for Windows

Find the Mac OS driver folder, double click “Uninstall.pgk” to uninstall the driver.

FIG 18 Driver Uninstallation for MAC OSX

Please keep the product away from water and humid environment to guarantee its normal performance
Protect it against hazatdous substances (such as acids,alkalis etc).
Please don’t directly expose the adapter to the sunlight or excessive heat.
Please contact our tech support if any probems occur.