iiglo Solar Powerbank Instruction Manual
- June 7, 2024
- iiglo
Table of Contents
Solar Powerbank
Model: IISPB1001
Instruction Manual
Product Diagram
1 | Micro USB | 8 | LED indication lights |
---|---|---|---|
2 | USB-C Input & Output | 9 | Solar indication light |
3 | USB 1 Output | 10 | Wireless charging ndication light |
4 | USB 2 Output | 11 | Solar Panel |
5 | Front light( with SOS) | 12 | Wireless charging area |
6 | LED lights button | 13 | Back light |
7 | Power button |
How to charge by a power outlet
As shown below:
-
Connect the solar power bank with USB-C/ Micro USB cable and standard adapter(5V/2A).
-
During charging, the LED indicator lights will work and blink with the battery capacity increasing. The battery is fully charged when the fourth LED light is on without blinking.
How to charge by solar power
Place the solar panel side under direct sunlight.
The solar indication light will turn red.
- LED blinking: 0%-25% charged
- LED on: 25%-50% charged
- LEDs on: 50%- 75% charged
- LEDs on: 75%-100% charged
- LEDs on: 100% charged
How to charge devices wirelessly
- Press the power key twice to start the wireless charging, the wireless charging indicator light will flash red and green alternately, then wireless charging is in standby.
- Place the devices on the wireless charging area. The solar charger will automatically charge the devices.
Note:
When the wireless charger is working, the wireless charging indicator light is
green. When the wireless charger is on, and no devices are detected, the
wireless charging indicator light will turn red, after 35 seconds, the
wireless charger will turn off automatically. When there is metal material
(not devices) on the wireless charging area, the wireless charger indication
light will flash red.
How to charge devices by USB-A/USB-C
Select the correct cables according to the devices· input ports. Connect the solar charger and devices by cables. The Solar charger will automatically charge for the devices.
Note:
The solar charger will automatically turn off after 65 seconds if there are no
output needs.
Product Specification
-
Battery type: Lithium-ion Polymer
-
Capacity: 20,000mAh
-
Micro USB input: 5V/2A
-
USB-C input & output: 5V/3A
-
USB 1 output: 5V/2.4A
-
USB 2 output: 5V/2.4A
-
Dual USB Maximum output: 5V/3A
-
Wireless Charger output: 10W, Compatible with 5W, 7.5W, 10W
-
Led indication lights usage:
4 LED indication lights show battery capacity
1 LED indication light shows solar panel working status
1 LED indication light shows wireless charger working status -
Size: 174.998.525mm
-
LEO Power: Backlight 2W + Front light 0.5W
-
Waterproof Rate: IPX4
-
LED lights button
1. Press the LED key for 1 second to turn on/off the front light.
2. Press 3 seconds to turn on SOS mode, and then press
1 second to turn off SOS mode.
3. Double press to turn on the backlight and double press again to turn off the backlight. -
Power button
1. Press the power button for 1 second to turn on the solar power bank, the LED indicator lights will turn on and show the battery capacity.
2. Press 3 seconds to turn off the solar charger, the LED indicator lights will turn off.
3. Double press to start the wireless charging and double press again to turn it off.
Product Features
- High capacity with 20,000mAh Lithium-ion battery
- Wide range application including 10W fast wireless charger
- High-efficiency solar panel
- Integrated hanging buckle
- Dual lights with SOS function
- Waterproof
Warnings and Cautions
- Do not puncture, throw, drop, bend or modify your powerbank• Do not throw the product into fire.
- Do not expose the product into fire or excessive heat.
- Do not short-circuit the product with lead or any metal objects.
- Please use the 5V standard adapter.
- Do not transport or store the battery with metal objects such as nail clippers.
- Avoid static electricity, strong magnetic fields and radiation.
- Do not disassemble the battery pack or change the structure.
- Stop using the battery when it generates an unusual smell, heating, distortion or any abnormalities.
- Do not allow children to play with the power bank.
- Do not solder directly the battery terminals.
- Use the battery in dry locations only.
- Do not disassemble the battery in any way;
- Do not charge the battery under fire or extreme heat
- It is prohibited to reverse the positive and negative poles;
- Do not connect the battery directly to a wall socket or a car cigarette lighter socket;
- It is forbidden to short-circuit the positive and negative terminals of the battery with wires or other metal objects;
- Recycle according to local recycling and environmental regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>