My 3-in-1® Turbo/Magic Vac® PowerBrush/Featherweight® Turbo Stick Vac brush is not turning | Support
- June 7, 2024
- Bissell
Table of Contents
Your brush will automatically shut off if it is bound by too much hair/debris
-
If the brush roll stalls because it is clogged the machine will need to cool down before restarting
-
Turn off and unplug machine
-
Remove foot assembly by pressing the release tab on the back of the foot
-
Clear debris from suction opening
- You should be able to see the brush through the suction opening
-
Clear all hair and debris from the brush roll
- Do not attempt to remove the brush cover – disassembling it will destroy the foot and void the warranty
-
Before attaching foot, plug in and turn on – check for suction on the end of the hand vac
-
If there is no suction here, see No Suction troubleshooting
-
If suction, attach the foot
-
If the brush is still not turning, a replacement Foot Assembly can be ordered
If you continue to have issues, Contact Us
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>