My TurboClean DualPro Pet/PowerForce PowerBrush Pet XL has No Spray | Support
- June 7, 2024
- Bissell
Table of Contents
If you are experiencing Low/No Spray, follow these steps to resolve:
-
Is the Brush Roll Turning?
- No > Go to Brush Not Turning
- Yes > If available on your model, make sure the cleaning mode is clearly selected
-
In Express mode much less water is applied, switch to DeepClean mode for more water/formula
-
Remove clean water tank and check that the tank is not warped, damaged, or cracked
- If clean water tank is damaged, warped, or cracked, a new one should be ordered > Go to Parts & Supplies
-
Over a sink, push up on valve on bottom of clean tank
- Does water come through?
- Yes > Reinsert tank and firmly push it back into place leaving no gaps
- If there are gaps, or tank does not seat properly, order a new clean water tank > Go to Parts & Supplies
- No > A new clean water tank should be ordered > Go to Parts & Supplies
-
Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > Where is there No Spray?
- Hose > Go to No Spray to Hose
- Foot > Go to Handle Removal
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Loading......