ICONpet™ Edge Cordless Vacuum Brush/Foot Area | Support
- June 7, 2024
- Bissell
Table of Contents
If you’re experiencing issues in the Brush/Foot area follow these steps to
resolve:
-
Turn OFF > Remove the Foot Assembly
- Press the release button at the bottom of the Extension Wand
-
Unscrew 7 Phillips head screws to remove Brush Access Plate
- Lift Brush out > Remove all debris from Brush and Brush End Caps
-
Clear all debris from the Suction Channel
- You should be able to see through the opening (where the Extension Wand attaches) into the Brush area
- If not, clear Channel of all debris
-
Inspect Brush and Brush Access Plate for damage
- If damaged > Replace the damaged part > Go to Parts & Supplies
-
Reinsert Brush > Rotate End Cap to Align with Chamber Wall > Opposite End Cap with Metal Connectors inserted into the Connection Points
-
Reattach Brush Access Plate > Secure 7 screws
-
Reconnect Foot to Extension Wand then to Hand Vac
-
Has this resolved the issue?
- Yes > Great! Glad we can get you back to Cleaning
- No > please Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>