My PowerForce®/Easy Vac® Lightweight Upright Vacuum brush is not turning | Support
- June 7, 2024
- Bissell
Table of Contents
-
Unplug vacuum and turn machine over so brush is facing up
-
Remove 5 screws from brush cover and lift off
-
Grasp brush at both ends and lift out of machine
-
Clean debris from brush and brush ends
-
Stand brush upright on hard surface with one hand holding top and spin brush with other hand
- If brush doesn’t spin freely, it will need to be replaced
-
If brush or belt is damaged, the part will need to be replaced
-
Loop belt over motor pulley and around brush between belt guard
- Pull brush into place and slide ends into slots
- Rotate brush several times to align belt
-
Replace brush cover and screws
- If brush still does not turn, visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>